jnxoptIfOTUkDAPIExpected

JNX-OPT-IF-MIB · .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.4

MIB view Table view

Object

column r/w JnxoptIfExDAPI

The DAPI expected by the receiver. 
This object is only applicable to the sink function, i.e., 
only when jnxoptIfOTUkDirectionality has the value sink(1) 
or bidirectional(3). It must not be instantiated in rows 
where jnxoptIfOTUkDirectionality has the value source(2). 
This object has no effect when jnxoptIfOTUkTIMDetMode has 
the value off(1).

Context

MIB: JNX-OPT-IF-MIB
OID: .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.4
Type: column
Access: readwrite
Status: current
Parent: jnxoptIfOTUkConfigEntry
Table: jnxoptIfOTUkConfigTable
Siblings: 13

Syntax

JnxoptIfExDAPI

Source: JnxoptIfExDAPI
Base type: OctetString

Values & Constraints

Type Constraints

range: 16

Related Objects

Sibling Objects

Object	Type	Syntax	OID
jnxoptIfOTUkDirectionality Indicates the directionality of the entity.	column	JnxoptIfDirectionality	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.1`
jnxoptIfOTUkDEGM Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfOTUkDEGM consecutive bad PM Seconds are detected. This object i…	column	JnxoptIfDEGM	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.10`
jnxoptIfOTUkSinkAdaptActive Indicates whether the sink adaptation function is activated or not. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the valu…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.11`
jnxoptIfOTUkSourceAdaptActive Indicates whether the source adaptation function is activated or not. This object is only applicable to the source function, i.e., only when jnxoptIfOTUkDirectionality has the …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.12`
jnxoptIfOTUkSinkFECEnabled If Forward Error Correction (FEC) is supported, this object indicates whether FEC at the OTUk sink adaptation function is enabled or not. This object is only applicable to the …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.13`
jnxoptIfOTUkCurrentStatus Indicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the value sink(1) or b…	column	Bits	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.14`
jnxoptIfOTUkBitRateK Indicates the bit rate of the entity.	column	JnxoptIfBitRateK	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.2`
jnxoptIfOTUkTraceIdentifierTransmitted The trace identifier transmitted. This object is applicable when jnxoptIfOTUkDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows whe…	column	JnxoptIfTxTI	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.3`
jnxoptIfOTUkSAPIExpected The SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the value sink(1) or bidirectional(3). It…	column	JnxoptIfExSAPI	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.5`
jnxoptIfOTUkTraceIdentifierAccepted The actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the value sink(1) or bidirectional(3).…	column	JnxoptIfAcTI	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.6`
jnxoptIfOTUkTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality ha…	column	JnxoptIfTIMDetMode	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.7`
jnxoptIfOTUkTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDi…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.8`
jnxoptIfOTUkDEGThr Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that seco…	column	percentage JnxoptIfDEGThr	`.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9`