jnxoptIfOTUkConfigEntry
JNX-OPT-IF-MIB ·
.1.3.6.1.4.1.2636.3.73.1.1.7.1.1
Object
row
A conceptual row that contains OTUk configuration information of an interface.
Context
- MIB
- JNX-OPT-IF-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.1.7.1.1- Type
- row
- Status
- current
- Parent
- jnxoptIfOTUkConfigTable
- Table
- jnxoptIfOTUkConfigTable
- Children
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfOTUkDirectionality Indicates the directionality of the entity. | column | JnxoptIfDirectionality | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.1 |
| jnxoptIfOTUkDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfOTUkDEGM
consecutive bad PM Seconds are detected.
This object i… | column | JnxoptIfDEGM | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.10 |
| jnxoptIfOTUkSinkAdaptActive Indicates whether the sink adaptation function is activated or
not.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the valu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.11 |
| jnxoptIfOTUkSourceAdaptActive Indicates whether the source adaptation function is activated or
not.
This object is only applicable to the source function, i.e.,
only when jnxoptIfOTUkDirectionality has the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.12 |
| jnxoptIfOTUkSinkFECEnabled If Forward Error Correction (FEC) is supported, this object
indicates whether FEC at the OTUk sink adaptation function is
enabled or not.
This object is only applicable to the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.13 |
| jnxoptIfOTUkCurrentStatus Indicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or b… | column | Bits | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.14 |
| jnxoptIfOTUkBitRateK Indicates the bit rate of the entity. | column | JnxoptIfBitRateK | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.2 |
| jnxoptIfOTUkTraceIdentifierTransmitted The trace identifier transmitted.
This object is applicable when jnxoptIfOTUkDirectionality
has the value source(2) or bidirectional(3). It must not
be instantiated in rows whe… | column | JnxoptIfTxTI | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.3 |
| jnxoptIfOTUkDAPIExpected The DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It… | column | JnxoptIfExDAPI | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.4 |
| jnxoptIfOTUkSAPIExpected The SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It… | column | JnxoptIfExSAPI | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.5 |
| jnxoptIfOTUkTraceIdentifierAccepted The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3).… | column | JnxoptIfAcTI | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.6 |
| jnxoptIfOTUkTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality ha… | column | JnxoptIfTIMDetMode | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.7 |
| jnxoptIfOTUkTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.8 |
| jnxoptIfOTUkDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that seco… | column | percentage JnxoptIfDEGThr | .1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9 |