jnxoptIfODUkTNimTraceIdentifierAccepted
JNX-OPT-IF-MIB ·
.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.5
Object
column
JnxoptIfAcTI
The actual trace identifier accepted. The value of this object is unspecified if jnxoptIfODUkTNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if jnxoptIfODUkTNimRowStatus has any value other than active(1).
Context
- MIB
- JNX-OPT-IF-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxoptIfODUkTNimConfigEntry
- Table
- jnxoptIfODUkTNimConfigTable
- Siblings
- 10
Syntax
JnxoptIfAcTI
- Source
- JnxoptIfAcTI
- Base type
OctetString
Values & Constraints
Type Constraints
range: 64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfODUkTNimTcmField Indicates the tandem connection monitoring
field of the ODUk OH on which non-intrusive monitoring
is performed. Valid values are
integers from 1 to 6. | column | Unsigned32 | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.1 |
| jnxoptIfODUkTNimCurrentStatus Indicates the defect condition of the entity, if any.
The value of this object is unspecified if
jnxoptIfODUkTNimRowStatus has any value other than
active(1). | column | Bits | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.10 |
| jnxoptIfODUkTNimRowStatus This columnar object is used for creating and deleting a
conceptual row of the jnxoptIfODUkTNim config table.
It is used to model the addTCM and removeTCM operations of an
ODUk… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.11 |
| jnxoptIfODUkTNimDirectionality Specifies the monitor point for the ODUk TCM non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of jnxoptIfODUkDirectionality
h… | column | JnxoptIfSinkOrSource | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.2 |
| jnxoptIfODUkTNimDAPIExpected The DAPI expected by the receiver.
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
the value off(1) or sapi(3). | column | JnxoptIfExDAPI | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.3 |
| jnxoptIfODUkTNimSAPIExpected The SAPI expected by the receiver.
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
the value off(1) or dapi(2). | column | JnxoptIfExSAPI | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.4 |
| jnxoptIfODUkTNimTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function. | column | JnxoptIfTIMDetMode | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.6 |
| jnxoptIfODUkTNimTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.7 |
| jnxoptIfODUkTNimDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that seco… | column | percentage JnxoptIfDEGThr | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.8 |
| jnxoptIfODUkTNimDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTNimDEGM
consecutive bad PM Seconds are detected. | column | JnxoptIfDEGM | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.9 |