jnxoptIfODUkTNimDEGThr

JNX-OPT-IF-MIB · .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.8
MIB view Table view

Object

column r/w percentage JnxoptIfDEGThr 
Indicates the threshold level for declaring a performance 
monitoring (PM) Second to be bad. A PM Second is declared bad if 
the percentage of detected errored blocks in that second is 
greater than or equal to jnxoptIfODUkTNimDEGThr.

Context

MIB
JNX-OPT-IF-MIB
OID
.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.8
Type
column
Access
readwrite
Status
current
Units
percentage
Parent
jnxoptIfODUkTNimConfigEntry
Table
jnxoptIfODUkTNimConfigTable
Siblings
10

Syntax

percentage JnxoptIfDEGThr
Source
JnxoptIfDEGThr
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 1..100

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
jnxoptIfODUkTNimTcmField
Indicates the tandem connection monitoring field of the ODUk OH on which non-intrusive monitoring is performed. Valid values are integers from 1 to 6.
columnUnsigned32.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.1
jnxoptIfODUkTNimCurrentStatus
Indicates the defect condition of the entity, if any. The value of this object is unspecified if jnxoptIfODUkTNimRowStatus has any value other than active(1).
columnBits.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.10
jnxoptIfODUkTNimRowStatus
This columnar object is used for creating and deleting a conceptual row of the jnxoptIfODUkTNim config table. It is used to model the addTCM and removeTCM operations of an ODUk…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.11
jnxoptIfODUkTNimDirectionality
Specifies the monitor point for the ODUk TCM non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of jnxoptIfODUkDirectionality h…
columnJnxoptIfSinkOrSource.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.2
jnxoptIfODUkTNimDAPIExpected
The DAPI expected by the receiver. This object has no effect if jnxoptIfODUkTNimTIMDetMode has the value off(1) or sapi(3).
columnJnxoptIfExDAPI.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.3
jnxoptIfODUkTNimSAPIExpected
The SAPI expected by the receiver. This object has no effect if jnxoptIfODUkTNimTIMDetMode has the value off(1) or dapi(2).
columnJnxoptIfExSAPI.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.4
jnxoptIfODUkTNimTraceIdentifierAccepted
The actual trace identifier accepted. The value of this object is unspecified if jnxoptIfODUkTNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if …
columnJnxoptIfAcTI.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.5
jnxoptIfODUkTNimTIMDetMode
Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function.
columnJnxoptIfTIMDetMode.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.6
jnxoptIfODUkTNimTIMActEnabled
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.7
jnxoptIfODUkTNimDEGM
Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTNimDEGM consecutive bad PM Seconds are detected.
columnJnxoptIfDEGM.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.9