jnxoptIfODUkTNimTIMActEnabled
JNX-OPT-IF-MIB ·
.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.7
Object
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.
Context
- MIB
- JNX-OPT-IF-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- jnxoptIfODUkTNimConfigEntry
- Table
- jnxoptIfODUkTNimConfigTable
- Siblings
- 10
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfODUkTNimTcmField Indicates the tandem connection monitoring
field of the ODUk OH on which non-intrusive monitoring
is performed. Valid values are
integers from 1 to 6. | column | Unsigned32 | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.1 |
| jnxoptIfODUkTNimCurrentStatus Indicates the defect condition of the entity, if any.
The value of this object is unspecified if
jnxoptIfODUkTNimRowStatus has any value other than
active(1). | column | Bits | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.10 |
| jnxoptIfODUkTNimRowStatus This columnar object is used for creating and deleting a
conceptual row of the jnxoptIfODUkTNim config table.
It is used to model the addTCM and removeTCM operations of an
ODUk… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.11 |
| jnxoptIfODUkTNimDirectionality Specifies the monitor point for the ODUk TCM non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of jnxoptIfODUkDirectionality
h… | column | JnxoptIfSinkOrSource | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.2 |
| jnxoptIfODUkTNimDAPIExpected The DAPI expected by the receiver.
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
the value off(1) or sapi(3). | column | JnxoptIfExDAPI | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.3 |
| jnxoptIfODUkTNimSAPIExpected The SAPI expected by the receiver.
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
the value off(1) or dapi(2). | column | JnxoptIfExSAPI | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.4 |
| jnxoptIfODUkTNimTraceIdentifierAccepted The actual trace identifier accepted. The value of
this object is unspecified if jnxoptIfODUkTNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if … | column | JnxoptIfAcTI | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.5 |
| jnxoptIfODUkTNimTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function. | column | JnxoptIfTIMDetMode | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.6 |
| jnxoptIfODUkTNimDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that seco… | column | percentage JnxoptIfDEGThr | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.8 |
| jnxoptIfODUkTNimDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTNimDEGM
consecutive bad PM Seconds are detected. | column | JnxoptIfDEGM | .1.3.6.1.4.1.2636.3.73.1.1.9.2.1.9 |