cmmRemoteSFPSonetCompliance

IPI-CMM-SMART-SFP-MIB · .1.3.6.1.4.1.36673.100.1.21.1.1.1.6
MIB view Table view

Object

column Bits 
Sonet Compliance codes of transceiver.

Context

MIB
IPI-CMM-SMART-SFP-MIB
OID
.1.3.6.1.4.1.36673.100.1.21.1.1.1.6
Type
column
Access
readonly
Status
current
Parent
cmmRemoteSFPEEPROMEntry
Table
cmmRemoteSFPEEPROMTable
Siblings
32

Syntax

Bits

Values & Constraints

Enumerated Values
0oc192-shortreach
1sonet-reachspecifier-bit1
2sonet-reachspecifier-bit2
3oc48-longreach
4oc48-intermediatereach
5oc48-shortreach
6oc12-singlemode-longreach
7oc12-singlemode-intermediatereach
8oc12-singlemode-shortreach
9oc3-singlemode-longreach
10oc3-singlemode-intermediatereach
11oc3-singlemode-shortreach
30unavailable
31not-applicable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmmRemoteSFPidentifier
The Type of transceiver present eg:SFP/SFP+/SFP28/QSFP/QSFP+/QSFP28.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.1
cmmRemoteSFPSFPFiberChnlSpeed
SFP Fiber Channel Speed.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.10
cmmRemoteSFPSFPInfiniBandCompliance
SFP InfiniBand Compliance.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.11
cmmRemoteSFPSFPEsconCompliance
SFP Enterprise Systems Connection compliance.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.12
cmmRemoteSFPSfpPlusCableTech
SFP+ Cable Technology.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.13
cmmRemoteSFPEncoding
Code for SFP/QSFP high speed serial encoding algorithm.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.14
cmmRemoteSFPLengthKmtrs
Link length supported for single mode fiber, units of km. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnkm Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.15
cmmRemoteSFPLengthMtrs
Link length supported for single mode fiber, units of 100 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column100 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.16
cmmRemoteSFPLengthOM1
Link length supported for 62.5 um OM1 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.17
cmmRemoteSFPLengthOM2
Link length supported for 50 um OM2 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.18
cmmRemoteSFPLengthOM3
Link length supported for 50 um OM3 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.19
cmmRemoteSFPSFPextendedidentifier
Extended identifier of SFP transceiver for additional information.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.2
cmmRemoteSFPLengthOM4
Link length supported for 50 um OM4 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.20
cmmRemoteSFPVendorName
Transceiver vendor name. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.21
cmmRemoteSFPVendorOUI
Transceiver vendor IEEE company ID. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.22
cmmRemoteSFPVendorPartNumber
Part number provided by tarnsceiver vendor. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.23
cmmRemoteSFPVendorRevision
Revision level for part number provided by vendor. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.24
cmmRemoteSFPCheckCode
Check code for Base ID Fields. Blank indicates unavailable
columnOctetString.1.3.6.1.4.1.36673.100.1.21.1.1.1.25
cmmRemoteSFPCheckCodeExtended
Check code for the Extended ID Fields. Blank indicates unavailable
columnOctetString.1.3.6.1.4.1.36673.100.1.21.1.1.1.26
cmmRemoteSFPNominalBitRate
Nominal signalling rate, units of 100MBd. '-100001' indicates unavailable '-100002' indicates not-applicable.
column100MBd Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.27
cmmRemoteSFPBitRateMax
Upper bit rate margin, units of 1% above the Nominal Bit Rate. Value '0' indicates this field is not specified. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnInteger32.1.3.6.1.4.1.36673.100.1.21.1.1.1.28
cmmRemoteSFPBitRateMin
Lower bit rate margin, units of 1% below the Nominal Bit Rate. Value '0' indicates this field is not specified. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnInteger32.1.3.6.1.4.1.36673.100.1.21.1.1.1.29
cmmRemoteSFPconnectortype
Connector type for the transceiver.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.3
cmmRemoteSFPVendorSerialNumber
Serial number provided by vendor. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.30
cmmRemoteSFPDateCode
Vendor's manufacturing date code. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.31
cmmRemoteSFPDDMSupport
Indicates whether diagnostics monitoring is supported or not. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.32
cmmRemoteSFPSFPOptionsImp
Transceiver Options Implemented for SFP Transceiver.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.33
cmmRemoteSFPEthCompliance
Values of Ethernet Compliance codes.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.4
cmmRemoteSFPExtEthCompliance
Bitmap of Extended Ethernet Compliance codes.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.5
cmmRemoteSFPFiberChnlLinkLen
Fiber Channel Link Length.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.7
cmmRemoteSFPFiberChnlTransTech
Fiber Channel Transmitter Technology.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.8
cmmRemoteSFPFiberChnlTransMedia
Fiber Channel Transmitter Media.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.9