cmmRemoteSFPSfpPlusCableTech
IPI-CMM-SMART-SFP-MIB ·
.1.3.6.1.4.1.36673.100.1.21.1.1.1.13
Object
column
Enumeration
SFP+ Cable Technology.
Context
- MIB
- IPI-CMM-SMART-SFP-MIB
- OID
.1.3.6.1.4.1.36673.100.1.21.1.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmmRemoteSFPEEPROMEntry
- Table
- cmmRemoteSFPEEPROMTable
- Siblings
- 32
Syntax
Enumeration
Values & Constraints
Enumerated Values
-100002 | not-applicable |
-100001 | unavailable |
1 | active |
2 | passive |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmmRemoteSFPidentifier The Type of transceiver present eg:SFP/SFP+/SFP28/QSFP/QSFP+/QSFP28. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.1 |
| cmmRemoteSFPSFPFiberChnlSpeed SFP Fiber Channel Speed. | column | Bits | .1.3.6.1.4.1.36673.100.1.21.1.1.1.10 |
| cmmRemoteSFPSFPInfiniBandCompliance SFP InfiniBand Compliance. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.11 |
| cmmRemoteSFPSFPEsconCompliance SFP Enterprise Systems Connection compliance. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.12 |
| cmmRemoteSFPEncoding Code for SFP/QSFP high speed serial encoding algorithm. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.14 |
| cmmRemoteSFPLengthKmtrs Link length supported for single mode fiber, units of km.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | km Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.15 |
| cmmRemoteSFPLengthMtrs Link length supported for single mode fiber, units of 100 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 100 m Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.16 |
| cmmRemoteSFPLengthOM1 Link length supported for 62.5 um OM1 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 10 m Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.17 |
| cmmRemoteSFPLengthOM2 Link length supported for 50 um OM2 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 10 m Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.18 |
| cmmRemoteSFPLengthOM3 Link length supported for 50 um OM3 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 10 m Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.19 |
| cmmRemoteSFPSFPextendedidentifier Extended identifier of SFP transceiver for additional information. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.2 |
| cmmRemoteSFPLengthOM4 Link length supported for 50 um OM4 fiber, units of 10 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 10 m Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.20 |
| cmmRemoteSFPVendorName Transceiver vendor name.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.21 |
| cmmRemoteSFPVendorOUI Transceiver vendor IEEE company ID.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.22 |
| cmmRemoteSFPVendorPartNumber Part number provided by tarnsceiver vendor.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.23 |
| cmmRemoteSFPVendorRevision Revision level for part number provided by vendor.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.24 |
| cmmRemoteSFPCheckCode Check code for Base ID Fields.
Blank indicates unavailable | column | OctetString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.25 |
| cmmRemoteSFPCheckCodeExtended Check code for the Extended ID Fields.
Blank indicates unavailable | column | OctetString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.26 |
| cmmRemoteSFPNominalBitRate Nominal signalling rate, units of 100MBd.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 100MBd Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.27 |
| cmmRemoteSFPBitRateMax Upper bit rate margin, units of 1% above the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.28 |
| cmmRemoteSFPBitRateMin Lower bit rate margin, units of 1% below the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | Integer32 | .1.3.6.1.4.1.36673.100.1.21.1.1.1.29 |
| cmmRemoteSFPconnectortype Connector type for the transceiver. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.3 |
| cmmRemoteSFPVendorSerialNumber Serial number provided by vendor.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.30 |
| cmmRemoteSFPDateCode Vendor's manufacturing date code.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.21.1.1.1.31 |
| cmmRemoteSFPDDMSupport Indicates whether diagnostics monitoring is
supported or not.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.32 |
| cmmRemoteSFPSFPOptionsImp Transceiver Options Implemented for SFP Transceiver. | column | Bits | .1.3.6.1.4.1.36673.100.1.21.1.1.1.33 |
| cmmRemoteSFPEthCompliance Values of Ethernet Compliance codes. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.21.1.1.1.4 |
| cmmRemoteSFPExtEthCompliance Bitmap of Extended Ethernet Compliance codes. | column | Bits | .1.3.6.1.4.1.36673.100.1.21.1.1.1.5 |
| cmmRemoteSFPSonetCompliance Sonet Compliance codes of transceiver. | column | Bits | .1.3.6.1.4.1.36673.100.1.21.1.1.1.6 |
| cmmRemoteSFPFiberChnlLinkLen Fiber Channel Link Length. | column | Bits | .1.3.6.1.4.1.36673.100.1.21.1.1.1.7 |
| cmmRemoteSFPFiberChnlTransTech Fiber Channel Transmitter Technology. | column | Bits | .1.3.6.1.4.1.36673.100.1.21.1.1.1.8 |
| cmmRemoteSFPFiberChnlTransMedia Fiber Channel Transmitter Media. | column | Bits | .1.3.6.1.4.1.36673.100.1.21.1.1.1.9 |