cmmRemoteSFPEncoding

IPI-CMM-SMART-SFP-MIB · .1.3.6.1.4.1.36673.100.1.21.1.1.1.14
MIB view Table view

Object

column Enumeration 
Code for SFP/QSFP high speed serial encoding algorithm.

Context

MIB
IPI-CMM-SMART-SFP-MIB
OID
.1.3.6.1.4.1.36673.100.1.21.1.1.1.14
Type
column
Access
readonly
Status
current
Parent
cmmRemoteSFPEEPROMEntry
Table
cmmRemoteSFPEEPROMTable
Siblings
32

Syntax

Enumeration

Values & Constraints

Enumerated Values
-100002not-applicable
-100001unavailable
1enc-unspecified
2enc-8b-or-10b
3enc-4b-or-5b
4enc-nrz
5enc-manchester
6enc-sonet-scrambled
7enc-64b-or-66b
8enc-256b-or-257b
9enc-pam4
10enc-reserved

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmmRemoteSFPidentifier
The Type of transceiver present eg:SFP/SFP+/SFP28/QSFP/QSFP+/QSFP28.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.1
cmmRemoteSFPSFPFiberChnlSpeed
SFP Fiber Channel Speed.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.10
cmmRemoteSFPSFPInfiniBandCompliance
SFP InfiniBand Compliance.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.11
cmmRemoteSFPSFPEsconCompliance
SFP Enterprise Systems Connection compliance.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.12
cmmRemoteSFPSfpPlusCableTech
SFP+ Cable Technology.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.13
cmmRemoteSFPLengthKmtrs
Link length supported for single mode fiber, units of km. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnkm Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.15
cmmRemoteSFPLengthMtrs
Link length supported for single mode fiber, units of 100 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column100 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.16
cmmRemoteSFPLengthOM1
Link length supported for 62.5 um OM1 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.17
cmmRemoteSFPLengthOM2
Link length supported for 50 um OM2 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.18
cmmRemoteSFPLengthOM3
Link length supported for 50 um OM3 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.19
cmmRemoteSFPSFPextendedidentifier
Extended identifier of SFP transceiver for additional information.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.2
cmmRemoteSFPLengthOM4
Link length supported for 50 um OM4 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.
column10 m Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.20
cmmRemoteSFPVendorName
Transceiver vendor name. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.21
cmmRemoteSFPVendorOUI
Transceiver vendor IEEE company ID. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.22
cmmRemoteSFPVendorPartNumber
Part number provided by tarnsceiver vendor. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.23
cmmRemoteSFPVendorRevision
Revision level for part number provided by vendor. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.24
cmmRemoteSFPCheckCode
Check code for Base ID Fields. Blank indicates unavailable
columnOctetString.1.3.6.1.4.1.36673.100.1.21.1.1.1.25
cmmRemoteSFPCheckCodeExtended
Check code for the Extended ID Fields. Blank indicates unavailable
columnOctetString.1.3.6.1.4.1.36673.100.1.21.1.1.1.26
cmmRemoteSFPNominalBitRate
Nominal signalling rate, units of 100MBd. '-100001' indicates unavailable '-100002' indicates not-applicable.
column100MBd Integer32.1.3.6.1.4.1.36673.100.1.21.1.1.1.27
cmmRemoteSFPBitRateMax
Upper bit rate margin, units of 1% above the Nominal Bit Rate. Value '0' indicates this field is not specified. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnInteger32.1.3.6.1.4.1.36673.100.1.21.1.1.1.28
cmmRemoteSFPBitRateMin
Lower bit rate margin, units of 1% below the Nominal Bit Rate. Value '0' indicates this field is not specified. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnInteger32.1.3.6.1.4.1.36673.100.1.21.1.1.1.29
cmmRemoteSFPconnectortype
Connector type for the transceiver.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.3
cmmRemoteSFPVendorSerialNumber
Serial number provided by vendor. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.30
cmmRemoteSFPDateCode
Vendor's manufacturing date code. Blank indicates unavailable
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.36673.100.1.21.1.1.1.31
cmmRemoteSFPDDMSupport
Indicates whether diagnostics monitoring is supported or not. '-100001' indicates unavailable '-100002' indicates not-applicable.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.32
cmmRemoteSFPSFPOptionsImp
Transceiver Options Implemented for SFP Transceiver.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.33
cmmRemoteSFPEthCompliance
Values of Ethernet Compliance codes.
columnEnumeration.1.3.6.1.4.1.36673.100.1.21.1.1.1.4
cmmRemoteSFPExtEthCompliance
Bitmap of Extended Ethernet Compliance codes.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.5
cmmRemoteSFPSonetCompliance
Sonet Compliance codes of transceiver.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.6
cmmRemoteSFPFiberChnlLinkLen
Fiber Channel Link Length.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.7
cmmRemoteSFPFiberChnlTransTech
Fiber Channel Transmitter Technology.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.8
cmmRemoteSFPFiberChnlTransMedia
Fiber Channel Transmitter Media.
columnBits.1.3.6.1.4.1.36673.100.1.21.1.1.1.9