bmmRxAmpDeviceSetpoint
INFINERA-ENTITY-BMM-MIB ·
.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.3
Object
column
INFINERA-TC-MIBFloatTenths
Current gain value for DAMP.
Context
- MIB
- INFINERA-ENTITY-BMM-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bmmEntry
- Table
- bmmTable
- Siblings
- 16
Syntax
INFINERA-TC-MIBFloatTenths
- Source
- INFINERA-TC-MIBFloatTenths
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bmmMoId This should be specified in the format of x-A-y. where x is the chassis MoId and y is the
slot in which BMM is present for example 1-A-1, 2-A-1 etc. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.1 |
| bmmRxDampSeqNum Current Rx DAMP sequence number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.10 |
| bmmTilt This attribute is an offset to the gain tilt of the BMM/OAM/ORM -
without any offset applied (offset of 0dB), the gain tilt of the BMM/OAM is 1dB. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.11 |
| bmmOperatingMode The BMM in mode at which is is operating. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.12 |
| bmmGain If configured mode is slteMode1 then user can input the required gain for rx EDFA. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.13 |
| bmmRowStatus The row status of this BMM entry.
Because rows in this table are indexed by entPhysicalIndex, to create a new row one must
choose a value of entPhysicalIndex that is not already i… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.14 |
| bmmMaxChanRatePlan Maximum Channel Rate Plan | column | INFINERA-TC-MIBInfnMaxChRatePlan | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.15 |
| bmmCBandSoakCapableFW | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.16 |
| bmmSuccessfulACGRunTime | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.17 |
| bmmProvisonedType The configured circuit pack type. | column | INFINERA-TC-MIBInfnEqptType | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.2 |
| bmmRxAmpDeviceTarget Target gain value for DAMP. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.4 |
| bmmRxLastAmpDeviceCommitTs The last gain adjusted time by DAMP protocol. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.5 |
| bmmDisableGainControlLoop Disable Gain Control Loop | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.6 |
| bmmLaunchPowerOffset The BMM launch power will be adjusted by this value. The range of valid
values is -2dB/channel to +2dB/channel. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.7 |
| bmmNumberOfChannel Number of active channels in OTS. The values can be 160, 80, 40 and 20. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.8 |
| bmmTxDampSeqNum Current Tx DAMP sequence number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.9 |