bmmLaunchPowerOffset

INFINERA-ENTITY-BMM-MIB · .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.7
MIB view Table view

Object

column r/w INFINERA-TC-MIBFloatTenths 
The BMM launch power will be adjusted by this value. The range of valid
values is -2dB/channel to +2dB/channel.

Context

MIB
INFINERA-ENTITY-BMM-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.7
Type
column
Access
readwrite
Status
current
Parent
bmmEntry
Table
bmmTable
Siblings
16

Syntax

INFINERA-TC-MIBFloatTenths
Source
INFINERA-TC-MIBFloatTenths
Base type
Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bmmMoId
This should be specified in the format of x-A-y. where x is the chassis MoId and y is the slot in which BMM is present for example 1-A-1, 2-A-1 etc.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.1
bmmRxDampSeqNum
Current Rx DAMP sequence number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.10
bmmTilt
This attribute is an offset to the gain tilt of the BMM/OAM/ORM - without any offset applied (offset of 0dB), the gain tilt of the BMM/OAM is 1dB.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.11
bmmOperatingMode
The BMM in mode at which is is operating.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.12
bmmGain
If configured mode is slteMode1 then user can input the required gain for rx EDFA.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.13
bmmRowStatus
The row status of this BMM entry. Because rows in this table are indexed by entPhysicalIndex, to create a new row one must choose a value of entPhysicalIndex that is not already i…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.14
bmmMaxChanRatePlan
Maximum Channel Rate Plan
columnINFINERA-TC-MIBInfnMaxChRatePlan.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.15
bmmCBandSoakCapableFWcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.16
bmmSuccessfulACGRunTimecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.17
bmmProvisonedType
The configured circuit pack type.
columnINFINERA-TC-MIBInfnEqptType.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.2
bmmRxAmpDeviceSetpoint
Current gain value for DAMP.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.3
bmmRxAmpDeviceTarget
Target gain value for DAMP.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.4
bmmRxLastAmpDeviceCommitTs
The last gain adjusted time by DAMP protocol.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.5
bmmDisableGainControlLoop
Disable Gain Control Loop
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.6
bmmNumberOfChannel
Number of active channels in OTS. The values can be 160, 80, 40 and 20.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.8
bmmTxDampSeqNum
Current Tx DAMP sequence number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.9