bmmRowStatus

INFINERA-ENTITY-BMM-MIB · .1.3.6.1.4.1.21296.2.2.2.1.3.1.1.14
MIB view Table view

Object

column r/w SNMPv2-TCRowStatus 
The row status of this BMM entry.
Because rows in this table are indexed by entPhysicalIndex, to create a new row one must
choose a value of entPhysicalIndex that is not already in use.
              
A side-effect of the creation of a row in this table is the creation of a corresponding
row in the eqptTable and the entPhysicalTable.
              
The status may not be set to active if the bmmMoId, bmmProvEqptType,  bmmDisableGainControlLoop, 
bmmLaunchPowerOffset,    or bmmNumberOfChannel objects are not set to valid values.
              
This row may only be deleted if it was a pre-provisioned row and the hardware is not present.
              
If this row is deleted, the associated row in the Eqpt Table and entPhysicalTable will be
deleted by the agent.

Context

MIB
INFINERA-ENTITY-BMM-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.14
Type
column
Access
readwrite
Status
current
Parent
bmmEntry
Table
bmmTable
Siblings
16

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bmmMoId
This should be specified in the format of x-A-y. where x is the chassis MoId and y is the slot in which BMM is present for example 1-A-1, 2-A-1 etc.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.1
bmmRxDampSeqNum
Current Rx DAMP sequence number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.10
bmmTilt
This attribute is an offset to the gain tilt of the BMM/OAM/ORM - without any offset applied (offset of 0dB), the gain tilt of the BMM/OAM is 1dB.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.11
bmmOperatingMode
The BMM in mode at which is is operating.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.12
bmmGain
If configured mode is slteMode1 then user can input the required gain for rx EDFA.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.13
bmmMaxChanRatePlan
Maximum Channel Rate Plan
columnINFINERA-TC-MIBInfnMaxChRatePlan.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.15
bmmCBandSoakCapableFWcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.16
bmmSuccessfulACGRunTimecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.17
bmmProvisonedType
The configured circuit pack type.
columnINFINERA-TC-MIBInfnEqptType.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.2
bmmRxAmpDeviceSetpoint
Current gain value for DAMP.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.3
bmmRxAmpDeviceTarget
Target gain value for DAMP.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.4
bmmRxLastAmpDeviceCommitTs
The last gain adjusted time by DAMP protocol.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.5
bmmDisableGainControlLoop
Disable Gain Control Loop
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.6
bmmLaunchPowerOffset
The BMM launch power will be adjusted by this value. The range of valid values is -2dB/channel to +2dB/channel.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.7
bmmNumberOfChannel
Number of active channels in OTS. The values can be 160, 80, 40 and 20.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.8
bmmTxDampSeqNum
Current Tx DAMP sequence number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.1.3.1.1.9