dot3HCStatsTransmitLPITransitions
IEEE8023-EtherLike-MIB ·
.1.3.111.2.802.3.1.10.1.11.1.9
Object
column
SNMPv2-SMICounter64
A count of occurrences of the transition from
state LPI_DEASSERTED to state LPI_ASSERTED of
the LPI transmit state diagram is the RS.
The state transition corresponds to the assertion
of the LPI_REQUEST parameter. The request is indicated
to the PHY according to the requirements of the RS
(see IEEE Std 802.3 22.7, 35.4, 46.4.)
This counter has a maximum increment rate of 50 000
counts per second at 100 Mb/s; 90 000 counts per
second at 1000 Mb/s; and 230 000 counts per second
at 10 Gb/s.
Context
- MIB
- IEEE8023-EtherLike-MIB
- OID
.1.3.111.2.802.3.1.10.1.11.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot3HCStatsEntry
- Table
- dot3HCStatsTable
- Siblings
- 9
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3HCStatsAlignmentErrors A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.
The count represented by an … | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.1 |
| dot3HCStatsReceiveLPITransitions A count of occurrences of the transition from DEASSERT
to ASSERT of the LPI_INDICATE parameter. The
indication reflects the state of the PHY according to
the requirements of th… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.10 |
| dot3HCStatsFCSErrors A count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received wit… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.2 |
| dot3HCStatsInternalMacTransmitErrors A count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of t… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.3 |
| dot3HCStatsFrameTooLongs A count of frames received on a particular
interface that exceed the maximum permitted
frame size.
The count represented by an instance of this
object is incremente… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.4 |
| dot3HCStatsInternalMacReceiveErrors A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.5 |
| dot3HCStatsSymbolErrors For an interface operating at 100 Mb/s, the
number of times there was an invalid data symbol
when a valid carrier was present.
For an interface opera… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.6 |
| dot3HCStatsTransmitLPIMicroseconds A count reflecting the amount of time that the
LPI_REQUEST parameter has the value ASSERT. The
request is indicated to the PHY according to the
requirements of the RS (see IEEE St… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.7 |
| dot3HCStatsReceiveLPIMicroseconds A count reflecting the amount of time that the
LPI_INDICATION parameter has the value ASSERT. The
indication reflects the state of the PHY according to
the requirements of the RS… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.8 |