dot3HCStatsSymbolErrors
IEEE8023-EtherLike-MIB ·
.1.3.111.2.802.3.1.10.1.11.1.6
Object
column
SNMPv2-SMICounter64
For an interface operating at 100 Mb/s, the
number of times there was an invalid data symbol
when a valid carrier was present.
For an interface operating in half-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle (a carrier event) for a period
of time equal to or greater than slotTime, and
during which there was at least one occurrence
of an event that causes the PHY to indicate
'Data reception error' or 'carrier extend error'
on the GMII.
For an interface operating in full-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle (a carrier event) for a period
of time equal to or greater than minFrameSize,
and during which there was at least one
occurrence of an event that causes the PHY to
indicate 'Data reception error' on the GMII.
For an interface operating at 10 Gb/s, 40 Gb/s and
100 Gb/s, the number of times the receiving media is
non-idle (a carrier event) for a period of time equal
to or greater than minFrameSize, and during which
there was at least one occurrence of an event
that causes the PHY to indicate 'Receive Error'
on the XGMII, the XLGMII, or the CGMII.
The count represented by an instance of this
object is incremented at most once per carrier
event, even if multiple symbol errors occur
during the carrier event. This count does
not increment if a collision is present.
This counter is a 64-bit version of
dot3StatsSymbolErrors. It should be used on
interfaces operating at 10 Gb/s or faster.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.
Context
- MIB
- IEEE8023-EtherLike-MIB
- OID
.1.3.111.2.802.3.1.10.1.11.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot3HCStatsEntry
- Table
- dot3HCStatsTable
- Siblings
- 9
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3HCStatsAlignmentErrors A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.
The count represented by an … | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.1 |
| dot3HCStatsReceiveLPITransitions A count of occurrences of the transition from DEASSERT
to ASSERT of the LPI_INDICATE parameter. The
indication reflects the state of the PHY according to
the requirements of th… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.10 |
| dot3HCStatsFCSErrors A count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received wit… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.2 |
| dot3HCStatsInternalMacTransmitErrors A count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of t… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.3 |
| dot3HCStatsFrameTooLongs A count of frames received on a particular
interface that exceed the maximum permitted
frame size.
The count represented by an instance of this
object is incremente… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.4 |
| dot3HCStatsInternalMacReceiveErrors A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.5 |
| dot3HCStatsTransmitLPIMicroseconds A count reflecting the amount of time that the
LPI_REQUEST parameter has the value ASSERT. The
request is indicated to the PHY according to the
requirements of the RS (see IEEE St… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.7 |
| dot3HCStatsReceiveLPIMicroseconds A count reflecting the amount of time that the
LPI_INDICATION parameter has the value ASSERT. The
indication reflects the state of the PHY according to
the requirements of the RS… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.8 |
| dot3HCStatsTransmitLPITransitions A count of occurrences of the transition from
state LPI_DEASSERTED to state LPI_ASSERTED of
the LPI transmit state diagram is the RS.
The state transition corresponds to the as… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.10.1.11.1.9 |