ieee8021TeipsIpgConfigMWTR

IEEE8021-TEIPS-MIB · .1.3.111.2.802.1.1.24.1.4.1.9
MIB view Table view

Object

column r/w minutes Unsigned32 
This column is used to configure the M:1 wait-to-restore
timer for the IPG operation if M:1 protection is
supported.  The timer may be configured in steps of
1 minute between 5 and 12 minutes, the default being 5.
Additionally, the value 0 is used to indicate that the
IPG is to operate non-revertively.

Context

MIB
IEEE8021-TEIPS-MIB
OID
.1.3.111.2.802.1.1.24.1.4.1.9
Type
column
Access
readwrite
Status
current
Units
minutes
Parent
ieee8021TeipsIpgConfigEntry
Table
ieee8021TeipsIpgConfigTable
Siblings
10

Syntax

minutes Unsigned32

Values & Constraints

Object Constraints
range: 0-0 range: 5-12

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ieee8021TeipsIpgConfigState
This column indicates the current state of the protection switching state machine for an IPG. The value can be one of the following: workingSegment(1) The prote…
columnEnumeration.1.3.111.2.802.1.1.24.1.4.1.1
ieee8021TeipsIpgConfigNotifyEnable
This column is used to enable or disable transmission of ieee8021TeipsIpgAdminFailure notifications. These notifications are generated whenever an administrative command cannot be…
columnSNMPv2-TCTruthValue.1.3.111.2.802.1.1.24.1.4.1.10
ieee8021TeipsIpgConfigStorageType
This object indicates the persistence of this entry. For permanent objects the ieee8021TeipsIpgConfigCommandAdmin column must be writable.
columnSNMPv2-TCStorageType.1.3.111.2.802.1.1.24.1.4.1.11
ieee8021TeipsIpgConfigCommandStatus
This column indicates the status of administrative commands within the protection group. It reflects the current operational administrative command being acted upon by the IPG.
columnIEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin.1.3.111.2.802.1.1.24.1.4.1.2
ieee8021TeipsIpgConfigCommandLast
This column indicates the last attempted administrative command applied to the IPG. It is changed whenever a write is made to the CommandAdmin column of this table and is essenti…
columnIEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin.1.3.111.2.802.1.1.24.1.4.1.3
ieee8021TeipsIpgConfigCommandAdmin
This column is used by the operator to request that the IPG state machine perform some administrative operation. The operator requests a command by writing the command value to t…
columnIEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin.1.3.111.2.802.1.1.24.1.4.1.4
ieee8021TeipsIpgConfigActiveRequests
This column shows the status of active requests associated with the IPG.
columnIEEE8021-TC-MIBIEEE8021TeipsIpgConfigActiveRequests.1.3.111.2.802.1.1.24.1.4.1.5
ieee8021TeipsIpgConfigWTR
This column is used to configure the wait-to-restore timer for the IPG operation. The timer may be configured in steps of 1 minute between 5 and 12 minutes, the default being 5. A…
columnminutes Unsigned32.1.3.111.2.802.1.1.24.1.4.1.6
ieee8021TeipsIpgConfigHoldOff
This column is used to configure the hold off timer. The purpose is to allow IPS to fix the problem before a higher-layer mechanism, such as PBB-TE TESI protection, is invoked or…
columndeciseconds Unsigned32.1.3.111.2.802.1.1.24.1.4.1.7
ieee8021TeipsIpgM1ConfigState
This column indicates the current state of the M:1 protection switching state machine for an IPG if M:1 IPS is supported. The value can be one of the following: psA…
columnEnumeration.1.3.111.2.802.1.1.24.1.4.1.8