ieee8021TeipsIpgConfigActiveRequests
IEEE8021-TEIPS-MIB ·
.1.3.111.2.802.1.1.24.1.4.1.5
Object
column
IEEE8021-TC-MIBIEEE8021TeipsIpgConfigActiveRequests
This column shows the status of active requests associated with the IPG.
Context
- MIB
- IEEE8021-TEIPS-MIB
- OID
.1.3.111.2.802.1.1.24.1.4.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ieee8021TeipsIpgConfigEntry
- Table
- ieee8021TeipsIpgConfigTable
- Siblings
- 10
Syntax
IEEE8021-TC-MIBIEEE8021TeipsIpgConfigActiveRequests
- Source
- IEEE8021-TC-MIBIEEE8021TeipsIpgConfigActiveRequests
- Base type
Enumeration
Values & Constraints
Type Values
1 | noRequest |
2 | loP |
3 | fs |
4 | pSFH |
5 | wSFH |
6 | manualSwitchToProtection |
7 | manualSwitchToWorking |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ieee8021TeipsIpgConfigState This column indicates the current state of the
protection switching state machine for an IPG.
The value can be one of the following:
workingSegment(1) The prote… | column | Enumeration | .1.3.111.2.802.1.1.24.1.4.1.1 |
| ieee8021TeipsIpgConfigNotifyEnable This column is used to enable or disable transmission
of ieee8021TeipsIpgAdminFailure notifications.
These notifications are generated whenever an
administrative command cannot be… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.24.1.4.1.10 |
| ieee8021TeipsIpgConfigStorageType This object indicates the persistence of this entry. For
permanent objects the ieee8021TeipsIpgConfigCommandAdmin
column must be writable. | column | SNMPv2-TCStorageType | .1.3.111.2.802.1.1.24.1.4.1.11 |
| ieee8021TeipsIpgConfigCommandStatus This column indicates the status of
administrative commands within the
protection group. It reflects the current
operational administrative command being
acted upon by the IPG. | column | IEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin | .1.3.111.2.802.1.1.24.1.4.1.2 |
| ieee8021TeipsIpgConfigCommandLast This column indicates the last attempted administrative
command applied to the IPG. It is changed
whenever a write is made to the CommandAdmin column of
this table and is essenti… | column | IEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin | .1.3.111.2.802.1.1.24.1.4.1.3 |
| ieee8021TeipsIpgConfigCommandAdmin This column is used by the operator to request
that the IPG state machine perform some
administrative operation. The operator requests
a command by writing the command value to t… | column | IEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin | .1.3.111.2.802.1.1.24.1.4.1.4 |
| ieee8021TeipsIpgConfigWTR This column is used to configure the
wait-to-restore timer for the IPG operation.
The timer may be configured in steps of 1 minute
between 5 and 12 minutes, the default being 5.
A… | column | minutes Unsigned32 | .1.3.111.2.802.1.1.24.1.4.1.6 |
| ieee8021TeipsIpgConfigHoldOff This column is used to configure the hold off
timer. The purpose is to allow IPS to fix the problem
before a higher-layer mechanism, such as PBB-TE TESI
protection, is invoked or… | column | deciseconds Unsigned32 | .1.3.111.2.802.1.1.24.1.4.1.7 |
| ieee8021TeipsIpgM1ConfigState This column indicates the current state of the M:1 protection
switching state machine for an IPG if M:1 IPS is supported.
The value can be one of the following:
psA… | column | Enumeration | .1.3.111.2.802.1.1.24.1.4.1.8 |
| ieee8021TeipsIpgConfigMWTR This column is used to configure the M:1 wait-to-restore
timer for the IPG operation if M:1 protection is
supported. The timer may be configured in steps of
1 minute between 5 an… | column | minutes Unsigned32 | .1.3.111.2.802.1.1.24.1.4.1.9 |