hwXponDeviceOtdrUpTestMode
HUAWEI-XPON-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.145.1.1.1.21.1.15
Object
column
r/w
Enumeration
Upstream test mode. Options: 1.onlineTest(1) - Indicates that the upstream test mode is online test. 2.quickTest(2) - Indicates that the upstream test mode is quick test. 3.invalid(-1) - Indicates that the query fails or no information is detected. Based on the selected test mode, the OLT can determine, work out the regularity of sending Trig signals and configure the optical module. Currently, this node cannot be configured.
Context
- MIB
- HUAWEI-XPON-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.145.1.1.1.21.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwXponDeviceOtdrTestEntry
- Table
- hwXponDeviceOtdrTestTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | onlineTest |
2 | quickTest |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXponDeviceOtdrTestOper OTDR test operation of a port.
Options:
1. start(1) - Indicates that the OTDR test is started on the port.
2. stop(2) - Indicates that the OTDR tes… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.1 |
| hwXponDeviceOtdrTestFilterMode Parameter configuration principle of the FIR filter.
Options:
1.systemDefault(1) - Indicates that the system default parameters are used for the FIR filter.
2.i… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.10 |
| hwXponDeviceOtdrTestFilterPara Parameters of the FIR filter.
If the parameter of hwXponDeviceOtdrTestFilterMode is set to the issued parameter,
this parameter is forwarded to the OTDR chip.
The first character … | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.11 |
| hwXponDeviceOtdrTestAverageTime Average sampling times for OTDR test.
Options:
1.thirtySeconds(1) - Indicates that the OTDR test is executed every 30 seconds.
2.oneMinute(2) … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.12 |
| hwXponDeviceOtdrTestOpticalFibreLength Length of the optical fiber to be tested.
Options:
1.(1) - Indicates that the length of the optical fiber to be tested is 5 km.
2.(2) - Indicate… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.13 |
| hwXponDeviceOtdrTestDownPowerUsage Modulation depth of downstream test signals
Currently, this value can be set to 10, 20, 30, 40, 50 and 100.
which indicates that the modulation depth is 10%, 20%, 30%, 40%, 50% an… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.14 |
| hwXponDeviceOtdrServerIpAddress The destination IP address of the OTDR.
The vlaue of this node can be FFFFFFFF indicates that query fails or no information is detected. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.16 |
| hwXponDeviceOtdrProtocol Transfer protocol of test result.
Options:
1.ftp(1) - Indicates that the test result file transfer mode is ftp.
2.tftp(2) - Indicates that the … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.17 |
| hwXponDeviceOtdrUserName The user name of OTDR test. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.18 |
| hwXponDeviceOtdrPassword The password of OTDR test. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.19 |
| hwXponDeviceOtdrTestStatus The state of OTDR test.
Options:
1. untested (1) - Indicates that the OTDR test is not performed for the port.
2. testing (2) - Indicates that the … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.2 |
| hwXponDeviceOtdrFilePath The file path of OTDR test. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.20 |
| hwXponDeviceOtdrTestFilterOrder Value of the FIR filter order.
Options:
1.fifteenOrder(1) - Indicates that the FIR filter order is fifteen.
2.sixteenOrder(2) - Indicates that… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.21 |
| hwXponDeviceOtdrTestResult This object indicates the result of OTDR test.
Options:
1. Success(1) - Indicates that the OTDR test successfully.
2. FtpFail(2) - Indicates th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.3 |
| hwXponDeviceOtdrTestWave Test wave for the OTDR test.
Options:
1.upWave(1) - Indicates that the upstream wavelength is selected for the OTDR test.
2.downWave(2) - Indicat… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.4 |
| hwXponDeviceOtdrTestPulseWidth Pulse width of test signals.
Unit: 0.01ns
The value of this node can be -1 indicates that query fails or no information is detected.
Default:2500. | column | 0.01ns SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.5 |
| hwXponDeviceOtdrClockRate Clock rate of the OTDR test.
Options:
1.fortyMHz(1) - Indicates that the clock rate of the OTDR test is 40 MHz, at which, the system works in the low power co… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.6 |
| hwXponDeviceOtdrTestSignalType Type of sent OTDR test signals.
Options:
1.singlePulse(1) - Indicates single pulse
2.singlePnSequence(2) - Indicates single PN sequence.
3.… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.7 |
| hwXponDeviceOtdrTestFreq Sampling frequency of the OTDR test; Fclk indicates the clock frequency.
Options:
1.doubleFclk(1) - Indicates that the sampling frequency of OTDR test is 2 x Fc… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.8 |
| hwXponDeviceOtdrTestFilterSwitch Enable status of the OTDR FIR filter.
Options:
1.enable(1) - Indicates that the OTDR FIR filter is enabled.
2.disable(2) - Indicates that the O… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.9 |