hwXponDeviceOtdrTestFilterSwitch
HUAWEI-XPON-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.145.1.1.1.21.1.9
Object
column
r/w
Enumeration
Enable status of the OTDR FIR filter. Options: 1.enable(1) - Indicates that the OTDR FIR filter is enabled. 2.disable(2) - Indicates that the OTDR FIR filter is disabled. 3.invalid(-1) - Indicates that the query fails or no information is detected. Default:enable(1).
Context
- MIB
- HUAWEI-XPON-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.145.1.1.1.21.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwXponDeviceOtdrTestEntry
- Table
- hwXponDeviceOtdrTestTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXponDeviceOtdrTestOper OTDR test operation of a port.
Options:
1. start(1) - Indicates that the OTDR test is started on the port.
2. stop(2) - Indicates that the OTDR tes… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.1 |
| hwXponDeviceOtdrTestFilterMode Parameter configuration principle of the FIR filter.
Options:
1.systemDefault(1) - Indicates that the system default parameters are used for the FIR filter.
2.i… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.10 |
| hwXponDeviceOtdrTestFilterPara Parameters of the FIR filter.
If the parameter of hwXponDeviceOtdrTestFilterMode is set to the issued parameter,
this parameter is forwarded to the OTDR chip.
The first character … | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.11 |
| hwXponDeviceOtdrTestAverageTime Average sampling times for OTDR test.
Options:
1.thirtySeconds(1) - Indicates that the OTDR test is executed every 30 seconds.
2.oneMinute(2) … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.12 |
| hwXponDeviceOtdrTestOpticalFibreLength Length of the optical fiber to be tested.
Options:
1.(1) - Indicates that the length of the optical fiber to be tested is 5 km.
2.(2) - Indicate… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.13 |
| hwXponDeviceOtdrTestDownPowerUsage Modulation depth of downstream test signals
Currently, this value can be set to 10, 20, 30, 40, 50 and 100.
which indicates that the modulation depth is 10%, 20%, 30%, 40%, 50% an… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.14 |
| hwXponDeviceOtdrUpTestMode Upstream test mode.
Options:
1.onlineTest(1) - Indicates that the upstream test mode is online test.
2.quickTest(2) - Indicates that the upst… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.15 |
| hwXponDeviceOtdrServerIpAddress The destination IP address of the OTDR.
The vlaue of this node can be FFFFFFFF indicates that query fails or no information is detected. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.16 |
| hwXponDeviceOtdrProtocol Transfer protocol of test result.
Options:
1.ftp(1) - Indicates that the test result file transfer mode is ftp.
2.tftp(2) - Indicates that the … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.17 |
| hwXponDeviceOtdrUserName The user name of OTDR test. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.18 |
| hwXponDeviceOtdrPassword The password of OTDR test. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.19 |
| hwXponDeviceOtdrTestStatus The state of OTDR test.
Options:
1. untested (1) - Indicates that the OTDR test is not performed for the port.
2. testing (2) - Indicates that the … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.2 |
| hwXponDeviceOtdrFilePath The file path of OTDR test. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.20 |
| hwXponDeviceOtdrTestFilterOrder Value of the FIR filter order.
Options:
1.fifteenOrder(1) - Indicates that the FIR filter order is fifteen.
2.sixteenOrder(2) - Indicates that… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.21 |
| hwXponDeviceOtdrTestResult This object indicates the result of OTDR test.
Options:
1. Success(1) - Indicates that the OTDR test successfully.
2. FtpFail(2) - Indicates th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.3 |
| hwXponDeviceOtdrTestWave Test wave for the OTDR test.
Options:
1.upWave(1) - Indicates that the upstream wavelength is selected for the OTDR test.
2.downWave(2) - Indicat… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.4 |
| hwXponDeviceOtdrTestPulseWidth Pulse width of test signals.
Unit: 0.01ns
The value of this node can be -1 indicates that query fails or no information is detected.
Default:2500. | column | 0.01ns SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.5 |
| hwXponDeviceOtdrClockRate Clock rate of the OTDR test.
Options:
1.fortyMHz(1) - Indicates that the clock rate of the OTDR test is 40 MHz, at which, the system works in the low power co… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.6 |
| hwXponDeviceOtdrTestSignalType Type of sent OTDR test signals.
Options:
1.singlePulse(1) - Indicates single pulse
2.singlePnSequence(2) - Indicates single PN sequence.
3.… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.7 |
| hwXponDeviceOtdrTestFreq Sampling frequency of the OTDR test; Fclk indicates the clock frequency.
Options:
1.doubleFclk(1) - Indicates that the sampling frequency of OTDR test is 2 x Fc… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.21.1.8 |