hwApSystemProfileEntry
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.12.1
Object
row
The index of this table is hwApSystemProfName.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.12.1- Type
- row
- Status
- current
- Parent
- hwApSystemProfileTable
- Table
- hwApSystemProfileTable
- Children
- 119
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwApSystemProfName This object indicates the name of an AP system profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.1 |
| hwApProfManagementVlan This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.10 |
| hwApProfLowTempApEnvironmentThreshold Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.100 |
| hwApProfLowTempCpuThreshold Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.101 |
| hwApProfLowTempNpThreshold Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.102 |
| hwApSystemProfileNPFastForwardingSwitch This object indicates whether to enable the NP fast forwarding function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.103 |
| hwApSystemProfileNPCapwapReassemblySwitch This object indicates whether to enable the NP capwap reassembly function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.104 |
| hwApProfRadioMode This object indicates the radio mode for AP. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.105 |
| hwApProfPowerForceWorkmode This object indicates the force workmode of power. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.106 |
| hwApServiceExpAnalysisInterval This object indicates the SEA monitor interval. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.107 |
| hwApCPETunnelLocalIPv4Address This object indicates the IPv4 address of the AP on a CPE tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.108 |
| hwApTerminalIdentifySwitch This object indicates the terminal-identify switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.109 |
| hwApProfHighTempThreshold This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with differe… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.11 |
| hwApSIpFpmUserFlowLimit This object indicates the user sipfpm flow limit. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.110 |
| hwApProfMeshRouteAgingTime This object indicates the mesh route aging time. The default value is 5. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.111 |
| hwApMeshLeafNode This object indicates whether to enable mesh leaf node function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.112 |
| hwApLocalManagementSwitch This object indicates the switch of the AP local management. The default value is disable(1). | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.113 |
| hwApLocalManagementIPAddress This object indicates the AP's local management IPv4 address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.114 |
| hwApLocalManagementIPMask This object indicates the AP's local management IPv4 mask. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.115 |
| hwApCapwapDtlsCertCnType This object indicates whether the global cert CN function for CAPWAP DTLS is enabled. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.116 |
| hwApCapwapDtlsCertCnString This object indicates whether the global cert CN string. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.117 |
| hwApCPEManagementListenPort This object indicates the CPE management listen port. The default value is 15440. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.118 |
| hwApCPEManagementCpePort This object indicates the CPE management CPE port. The default value is 15442. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.119 |
| hwApProfLowTempThreshold This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.12 |
| hwApDistributeModeSwitch This object indicates the distribute mode switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.120 |
| hwApProfOpHRxPowerThreshold This object indicates the high power threshold of an optical module. The default value is 1000. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.13 |
| hwApProfOpLRxPowerThreshold This object indicates the low power threshold of an optical module. The default value is 50. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.14 |
| hwApProfOpHTempThreshold This object indicates the high temperature threshold of an optical module. The default value is 70. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.15 |
| hwApProfOpLTempThreshold This object indicates the low temperature threshold of an optical module. The default value is -5. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.16 |
| hwApProfMemoryUsageThreshold This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.17 |
| hwApProfCpuUsageThreshold This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.18 |
| hwApProfTelnetSwitch This object indicates whether to enable Telnet. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.19 |
| hwApProfSTelnetSwitch This object indicates whether to enable SSH. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.20 |
| hwApProfConsoleSwitch This object indicates whether to enable the console. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.21 |
| hwApProfLogRecordLevel This object indicates the log backup level. The default value is 7. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.22 |
| hwApProfLogServerIp This object indicates the IP address of the log server. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.23 |
| hwApProfLogServerIpv6 This object indicates the IPv6 address of the log server. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.24 |
| hwApProfAlarmRestrictionSwitch This object indicates the status of the alarm suppression switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.25 |
| hwApProfAlarmRestrictionPeriod This object indicates the alarm suppression period. The default value is 60 seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.26 |
| hwApProfKeepServiceSwitch This object indicates whether to enable the offline service retaining function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.27 |
| hwApProfProtectPriority This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.28 |
| hwApProfProtectACIp This object indicates the IP address of the standby AC. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.29 |
| hwApProfStatInterval Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.3 |
| hwApProfProtectACIpv6 This object indicates the IPv6 address of the standby AC. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.30 |
| hwApProfEapStartMode This object indicates the EAP Start packet conversion mode. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.31 |
| hwApProfEapStartTransform This object indicates the EAP Start packet conversion mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.32 |
| hwApProfEapStartUnicastMac This object indicates that EAP Start packets are converted to those with specific MAC addresses. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.33 |
| hwApProfEapResponseMode This object indicates the EAP Response packet conversion mode. The default value is 4. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.34 |
| hwApProfEapResponseTransform This object indicates the EAP Response packet conversion mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.35 |
| hwApProfEapResponseUnicastMac This object indicates that EAP Response packets are converted to those with specific MAC addresses. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.36 |
| hwApProfLldpRestartDelay This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.37 |
| hwApProfLldpAdminStatus This object indicates the operation mode of LLDP. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.38 |
| hwApProfLldpRetransDelay This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.39 |
| hwApProfSampleTime This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.4 |
| hwApProfLldpRetransHoldMultiplier This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.40 |
| hwApProfLldpInterval This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.41 |
| hwApProfLldpReportInterval This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.42 |
| hwApProfStaAccessMode This object indicates the access mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.43 |
| hwApProfStaAccessModeProfile This object indicates blacklist and whitelist profiles. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.44 |
| hwApProfRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? R… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.12.1.45 |
| hwApProfSFTPSwitch This object indicates whether to enable the SFTP. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.46 |
| hwApProfDynamicBlackListAgingTime This object indicates the aging time of the dynamic blacklist entries. The default value is 300. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.47 |
| hwApProfAntennaOutputMode Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.48 |
| hwApProfMppActiveReselectionSwitch This object indicates of mpp active reselection. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.49 |
| hwApProfLedSwitch This object indicates whether to enable the AP's LED indicator. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.5 |
| hwApProfSpectrumServerIPAddress This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.50 |
| hwApProfSpectrumServerIPv6Address This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.51 |
| hwApProfSpectrumServerPort This object indicates the port of the spectrum analysis server. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.52 |
| hwApProfSpectrumViaACSwitch This object indicates the status of the spectrum analysis function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.53 |
| hwApProfSpectrumViaACPort This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.54 |
| hwApProfSpectrumNonWifiDeviceAgingTime This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.55 |
| hwApProfPoeMaxPower This object indicates the maximum output power of the AP.The default value is 750000. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.56 |
| hwApProfPoePowerReserved This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 255. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.57 |
| hwApProfPoePowerThreshold This object indicates the alarm threshold of PoE power consumption percentage.The default value is 255. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.58 |
| hwApProfPoeAfInrushSwitch This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.59 |
| hwApProfMaxStaNum This object indicates the maximum number of access users on an AP. The default value is 128. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.6 |
| hwApProfPoeHighInrushSwitch This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.60 |
| hwApProfPrimaryLinkIPv4 This object indicates the IP address of the primary AC. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.61 |
| hwApProfPrimaryLinkIPv6 This object indicates the IPv6 address of the primary AC. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.62 |
| hwApProfBackupLinkIPv4 This object indicates the IP address of the backup AC. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.63 |
| hwApProfBackupLinkIPv6 This object indicates the IPv6 address of the backup AC. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.64 |
| hwApProfLedOffTimeRange This object indicates whether to make a configured Led off time range effective. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.65 |
| hwApProfUsbSwitch This object indicates whether to enable the USB. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.66 |
| hwApProfBroadcastSuppressionArpEnable This object indicates whether to enable the arp broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.67 |
| hwApProfBroadcastSuppressionArpThreshold This object indicates the threshold of arp broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.68 |
| hwApProfBroadcastSuppressionIgmpEnable This object indicates whether to enable the igmp broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.69 |
| hwApProfMtu This object indicates the MTU of an AP interface. The default value is 1500. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.7 |
| hwApProfBroadcastSuppressionIgmpThreshold This object indicates the threshold of igmp broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.70 |
| hwApProfBroadcastSuppressionNdEnable This object indicates whether to enable the nd broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.71 |
| hwApProfBroadcastSuppressionNdThreshold This object indicates the threshold of nd broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.72 |
| hwApProfBroadcastSuppressionOtherEnable This object indicates whether to enable the other broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.73 |
| hwApProfBroadcastSuppressionOtherThreshold This object indicates the threshold of other broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.74 |
| hwApProfBroadcastSuppressionAllEnable This object indicates whether to enable all the broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.75 |
| hwApProfCapwapDtlsDataSwitch This object indicates the status of the DTLS function of data-link. The default value is 3. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.76 |
| hwApProfTemporaryManagementPsk This object indicates the psk of the AP-based offline VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.77 |
| hwApProfProtectLinkSwitchMode This object indicates the mode of the ac protect link-switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.78 |
| hwApProfProtectLinkSwitchEchoProbeTime This object indicates the time of echo probe. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.79 |
| hwApProfMeshRole This object indicates a Mesh role. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.8 |
| hwApProfProtectLinkSwitchStartThreshold This object indicates the start threshold of packet-loss rate. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.80 |
| hwApProfProtectLinkSwitchGapThreshold This object indicates the gap threshold of packet-loss rate. The default value is 15. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.81 |
| hwApProfCardConnectType Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.82 |
| hwApProfLldpReportEnable This object indicates whether to enable the lldp report .The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.83 |
| hwApProfDhcpv4Option12 This object indicates the type of dhcpve option12 .The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.84 |
| hwApProfBcSuppresionAutoDetectThreshold This object indicates the value of broadcast value .The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.85 |
| hwApProfMcSuppresionAutoDetectThreshold This object indicates the value of multicast value .The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.86 |
| hwApProfUcSuppresionAutoDetectThreshold This object indicates the value of unicast value .The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.87 |
| hwApProfConsoleBLEMode This object indicates the type of ble console .The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.88 |
| hwApProfDiskUsageThreshold This object indicates the AP disk usage rate alarm threshold. The default value is 95. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.89 |
| hwApProfTemporaryManagement This object indicates the status of the AP-based offline VAP switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.9 |
| hwApProfLogServerPort This object indicates syslog server port. The default value is 514. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.90 |
| hwApProfStationConnectivityDetectSwitch This object indicates whether to disable the Station Connectivity Detect. The default value is enable. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.91 |
| hwApProfStaArpNDProxyBeforeAssoc This object indicates the mode of the station arp-nd-proxy before association .The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.92 |
| hwApProfUcSuppressionAutoDetectSwitch This object indicates the switch of the unicast-suppression auto detect .The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.93 |
| hwApProfPkiCertFileType This object indicates the AP PKI certificate file type. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.94 |
| hwApProfPkiCertFileName This object indicates the AP PKI certificate filename. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.95 |
| hwApProfPkiCertFilePassword This object indicates the AP PKI certificate file password. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.96 |
| hwApProfHighTempApEnvironmentThreshold Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.97 |
| hwApProfHighTempCpuThreshold Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.98 |
| hwApProfHighTempNpThreshold Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.99 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwApSystemProfName This object indicates the name of an AP system profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.1 |