hwApProfHighTempThreshold
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.12.1.11
Object
column
r/w
Unsigned32
This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with different AP types. For details, see AP device information.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.12.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwApSystemProfileEntry
- Table
- hwApSystemProfileTable
- Siblings
- 118
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 20-110
range: 4294967295-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwApSystemProfName This object indicates the name of an AP system profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.1 |
| hwApProfManagementVlan This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.10 |
| hwApProfLowTempApEnvironmentThreshold Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.100 |
| hwApProfLowTempCpuThreshold Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.101 |
| hwApProfLowTempNpThreshold Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.102 |
| hwApSystemProfileNPFastForwardingSwitch This object indicates whether to enable the NP fast forwarding function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.103 |
| hwApSystemProfileNPCapwapReassemblySwitch This object indicates whether to enable the NP capwap reassembly function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.104 |
| hwApProfRadioMode This object indicates the radio mode for AP. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.105 |
| hwApProfPowerForceWorkmode This object indicates the force workmode of power. The default value is 255. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.106 |
| hwApServiceExpAnalysisInterval This object indicates the SEA monitor interval. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.107 |
| hwApCPETunnelLocalIPv4Address This object indicates the IPv4 address of the AP on a CPE tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.108 |
| hwApTerminalIdentifySwitch This object indicates the terminal-identify switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.109 |
| hwApSIpFpmUserFlowLimit This object indicates the user sipfpm flow limit. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.110 |
| hwApProfMeshRouteAgingTime This object indicates the mesh route aging time. The default value is 5. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.111 |
| hwApMeshLeafNode This object indicates whether to enable mesh leaf node function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.112 |
| hwApLocalManagementSwitch This object indicates the switch of the AP local management. The default value is disable(1). | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.113 |
| hwApLocalManagementIPAddress This object indicates the AP's local management IPv4 address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.114 |
| hwApLocalManagementIPMask This object indicates the AP's local management IPv4 mask. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.115 |
| hwApCapwapDtlsCertCnType This object indicates whether the global cert CN function for CAPWAP DTLS is enabled. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.116 |
| hwApCapwapDtlsCertCnString This object indicates whether the global cert CN string. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.117 |
| hwApCPEManagementListenPort This object indicates the CPE management listen port. The default value is 15440. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.118 |
| hwApCPEManagementCpePort This object indicates the CPE management CPE port. The default value is 15442. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.119 |
| hwApProfLowTempThreshold This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.12 |
| hwApDistributeModeSwitch This object indicates the distribute mode switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.120 |
| hwApProfOpHRxPowerThreshold This object indicates the high power threshold of an optical module. The default value is 1000. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.13 |
| hwApProfOpLRxPowerThreshold This object indicates the low power threshold of an optical module. The default value is 50. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.14 |
| hwApProfOpHTempThreshold This object indicates the high temperature threshold of an optical module. The default value is 70. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.15 |
| hwApProfOpLTempThreshold This object indicates the low temperature threshold of an optical module. The default value is -5. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.16 |
| hwApProfMemoryUsageThreshold This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.17 |
| hwApProfCpuUsageThreshold This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.18 |
| hwApProfTelnetSwitch This object indicates whether to enable Telnet. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.19 |
| hwApProfSTelnetSwitch This object indicates whether to enable SSH. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.20 |
| hwApProfConsoleSwitch This object indicates whether to enable the console. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.21 |
| hwApProfLogRecordLevel This object indicates the log backup level. The default value is 7. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.22 |
| hwApProfLogServerIp This object indicates the IP address of the log server. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.23 |
| hwApProfLogServerIpv6 This object indicates the IPv6 address of the log server. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.24 |
| hwApProfAlarmRestrictionSwitch This object indicates the status of the alarm suppression switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.25 |
| hwApProfAlarmRestrictionPeriod This object indicates the alarm suppression period. The default value is 60 seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.26 |
| hwApProfKeepServiceSwitch This object indicates whether to enable the offline service retaining function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.27 |
| hwApProfProtectPriority This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.28 |
| hwApProfProtectACIp This object indicates the IP address of the standby AC. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.29 |
| hwApProfStatInterval Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.3 |
| hwApProfProtectACIpv6 This object indicates the IPv6 address of the standby AC. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.30 |
| hwApProfEapStartMode This object indicates the EAP Start packet conversion mode. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.31 |
| hwApProfEapStartTransform This object indicates the EAP Start packet conversion mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.32 |
| hwApProfEapStartUnicastMac This object indicates that EAP Start packets are converted to those with specific MAC addresses. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.33 |
| hwApProfEapResponseMode This object indicates the EAP Response packet conversion mode. The default value is 4. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.34 |
| hwApProfEapResponseTransform This object indicates the EAP Response packet conversion mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.35 |
| hwApProfEapResponseUnicastMac This object indicates that EAP Response packets are converted to those with specific MAC addresses. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.36 |
| hwApProfLldpRestartDelay This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.37 |
| hwApProfLldpAdminStatus This object indicates the operation mode of LLDP. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.38 |
| hwApProfLldpRetransDelay This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.39 |
| hwApProfSampleTime This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.4 |
| hwApProfLldpRetransHoldMultiplier This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.40 |
| hwApProfLldpInterval This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.41 |
| hwApProfLldpReportInterval This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.42 |
| hwApProfStaAccessMode This object indicates the access mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.43 |
| hwApProfStaAccessModeProfile This object indicates blacklist and whitelist profiles. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.44 |
| hwApProfRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? R… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.12.1.45 |
| hwApProfSFTPSwitch This object indicates whether to enable the SFTP. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.46 |
| hwApProfDynamicBlackListAgingTime This object indicates the aging time of the dynamic blacklist entries. The default value is 300. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.47 |
| hwApProfAntennaOutputMode Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.48 |
| hwApProfMppActiveReselectionSwitch This object indicates of mpp active reselection. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.49 |
| hwApProfLedSwitch This object indicates whether to enable the AP's LED indicator. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.5 |
| hwApProfSpectrumServerIPAddress This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.50 |
| hwApProfSpectrumServerIPv6Address This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.51 |
| hwApProfSpectrumServerPort This object indicates the port of the spectrum analysis server. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.52 |
| hwApProfSpectrumViaACSwitch This object indicates the status of the spectrum analysis function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.53 |
| hwApProfSpectrumViaACPort This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.54 |
| hwApProfSpectrumNonWifiDeviceAgingTime This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.55 |
| hwApProfPoeMaxPower This object indicates the maximum output power of the AP.The default value is 750000. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.56 |
| hwApProfPoePowerReserved This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 255. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.57 |
| hwApProfPoePowerThreshold This object indicates the alarm threshold of PoE power consumption percentage.The default value is 255. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.58 |
| hwApProfPoeAfInrushSwitch This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.59 |
| hwApProfMaxStaNum This object indicates the maximum number of access users on an AP. The default value is 128. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.6 |
| hwApProfPoeHighInrushSwitch This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.60 |
| hwApProfPrimaryLinkIPv4 This object indicates the IP address of the primary AC. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.61 |
| hwApProfPrimaryLinkIPv6 This object indicates the IPv6 address of the primary AC. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.62 |
| hwApProfBackupLinkIPv4 This object indicates the IP address of the backup AC. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.139.11.1.12.1.63 |
| hwApProfBackupLinkIPv6 This object indicates the IPv6 address of the backup AC. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.64 |
| hwApProfLedOffTimeRange This object indicates whether to make a configured Led off time range effective. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.65 |
| hwApProfUsbSwitch This object indicates whether to enable the USB. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.66 |
| hwApProfBroadcastSuppressionArpEnable This object indicates whether to enable the arp broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.67 |
| hwApProfBroadcastSuppressionArpThreshold This object indicates the threshold of arp broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.68 |
| hwApProfBroadcastSuppressionIgmpEnable This object indicates whether to enable the igmp broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.69 |
| hwApProfMtu This object indicates the MTU of an AP interface. The default value is 1500. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.7 |
| hwApProfBroadcastSuppressionIgmpThreshold This object indicates the threshold of igmp broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.70 |
| hwApProfBroadcastSuppressionNdEnable This object indicates whether to enable the nd broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.71 |
| hwApProfBroadcastSuppressionNdThreshold This object indicates the threshold of nd broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.72 |
| hwApProfBroadcastSuppressionOtherEnable This object indicates whether to enable the other broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.73 |
| hwApProfBroadcastSuppressionOtherThreshold This object indicates the threshold of other broadcast suppression. The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.74 |
| hwApProfBroadcastSuppressionAllEnable This object indicates whether to enable all the broadcast suppression.The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.75 |
| hwApProfCapwapDtlsDataSwitch This object indicates the status of the DTLS function of data-link. The default value is 3. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.76 |
| hwApProfTemporaryManagementPsk This object indicates the psk of the AP-based offline VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.77 |
| hwApProfProtectLinkSwitchMode This object indicates the mode of the ac protect link-switch. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.78 |
| hwApProfProtectLinkSwitchEchoProbeTime This object indicates the time of echo probe. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.79 |
| hwApProfMeshRole This object indicates a Mesh role. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.8 |
| hwApProfProtectLinkSwitchStartThreshold This object indicates the start threshold of packet-loss rate. The default value is 20. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.80 |
| hwApProfProtectLinkSwitchGapThreshold This object indicates the gap threshold of packet-loss rate. The default value is 15. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.81 |
| hwApProfCardConnectType Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.82 |
| hwApProfLldpReportEnable This object indicates whether to enable the lldp report .The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.83 |
| hwApProfDhcpv4Option12 This object indicates the type of dhcpve option12 .The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.84 |
| hwApProfBcSuppresionAutoDetectThreshold This object indicates the value of broadcast value .The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.85 |
| hwApProfMcSuppresionAutoDetectThreshold This object indicates the value of multicast value .The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.86 |
| hwApProfUcSuppresionAutoDetectThreshold This object indicates the value of unicast value .The default value is 256. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.87 |
| hwApProfConsoleBLEMode This object indicates the type of ble console .The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.88 |
| hwApProfDiskUsageThreshold This object indicates the AP disk usage rate alarm threshold. The default value is 95. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.89 |
| hwApProfTemporaryManagement This object indicates the status of the AP-based offline VAP switch. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.9 |
| hwApProfLogServerPort This object indicates syslog server port. The default value is 514. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.90 |
| hwApProfStationConnectivityDetectSwitch This object indicates whether to disable the Station Connectivity Detect. The default value is enable. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.91 |
| hwApProfStaArpNDProxyBeforeAssoc This object indicates the mode of the station arp-nd-proxy before association .The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.92 |
| hwApProfUcSuppressionAutoDetectSwitch This object indicates the switch of the unicast-suppression auto detect .The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.93 |
| hwApProfPkiCertFileType This object indicates the AP PKI certificate file type. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.12.1.94 |
| hwApProfPkiCertFileName This object indicates the AP PKI certificate filename. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.95 |
| hwApProfPkiCertFilePassword This object indicates the AP PKI certificate file password. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.12.1.96 |
| hwApProfHighTempApEnvironmentThreshold Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.97 |
| hwApProfHighTempCpuThreshold Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.98 |
| hwApProfHighTempNpThreshold Description. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.12.1.99 |