hwApProfProtectLinkSwitchMode

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.12.1.78
MIB view Table view

Object

column r/w Enumeration 
This object indicates the mode of the ac protect link-switch. The default value is 1.

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.12.1.78
Type
column
Access
readwrite
Status
current
Parent
hwApSystemProfileEntry
Table
hwApSystemProfileTable
Siblings
118

Syntax

Enumeration

Values & Constraints

Enumerated Values
1priority
2networkstabilization

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwApSystemProfName
This object indicates the name of an AP system profile. It is the index of the table.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.1
hwApProfManagementVlan
This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.10
hwApProfLowTempApEnvironmentThreshold
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.100
hwApProfLowTempCpuThreshold
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.101
hwApProfLowTempNpThreshold
Description.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.102
hwApSystemProfileNPFastForwardingSwitch
This object indicates whether to enable the NP fast forwarding function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.103
hwApSystemProfileNPCapwapReassemblySwitch
This object indicates whether to enable the NP capwap reassembly function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.104
hwApProfRadioMode
This object indicates the radio mode for AP. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.105
hwApProfPowerForceWorkmode
This object indicates the force workmode of power. The default value is 255.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.106
hwApServiceExpAnalysisInterval
This object indicates the SEA monitor interval.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.107
hwApCPETunnelLocalIPv4Address
This object indicates the IPv4 address of the AP on a CPE tunnel.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.108
hwApTerminalIdentifySwitch
This object indicates the terminal-identify switch. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.109
hwApProfHighTempThreshold
This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with differe…
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.11
hwApSIpFpmUserFlowLimit
This object indicates the user sipfpm flow limit.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.110
hwApProfMeshRouteAgingTime
This object indicates the mesh route aging time. The default value is 5.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.111
hwApMeshLeafNode
This object indicates whether to enable mesh leaf node function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.112
hwApLocalManagementSwitch
This object indicates the switch of the AP local management. The default value is disable(1).
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.113
hwApLocalManagementIPAddress
This object indicates the AP's local management IPv4 address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.114
hwApLocalManagementIPMask
This object indicates the AP's local management IPv4 mask.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.115
hwApCapwapDtlsCertCnType
This object indicates whether the global cert CN function for CAPWAP DTLS is enabled. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.116
hwApCapwapDtlsCertCnString
This object indicates whether the global cert CN string.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.117
hwApCPEManagementListenPort
This object indicates the CPE management listen port. The default value is 15440.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.118
hwApCPEManagementCpePort
This object indicates the CPE management CPE port. The default value is 15442.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.119
hwApProfLowTempThreshold
This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.12
hwApDistributeModeSwitch
This object indicates the distribute mode switch. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.120
hwApProfOpHRxPowerThreshold
This object indicates the high power threshold of an optical module. The default value is 1000.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.13
hwApProfOpLRxPowerThreshold
This object indicates the low power threshold of an optical module. The default value is 50.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.14
hwApProfOpHTempThreshold
This object indicates the high temperature threshold of an optical module. The default value is 70.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.15
hwApProfOpLTempThreshold
This object indicates the low temperature threshold of an optical module. The default value is -5.
columnInteger32.1.3.6.1.4.1.2011.6.139.11.1.12.1.16
hwApProfMemoryUsageThreshold
This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.17
hwApProfCpuUsageThreshold
This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.18
hwApProfTelnetSwitch
This object indicates whether to enable Telnet. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.19
hwApProfSTelnetSwitch
This object indicates whether to enable SSH. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.20
hwApProfConsoleSwitch
This object indicates whether to enable the console. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.21
hwApProfLogRecordLevel
This object indicates the log backup level. The default value is 7.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.22
hwApProfLogServerIp
This object indicates the IP address of the log server.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.23
hwApProfLogServerIpv6
This object indicates the IPv6 address of the log server.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.24
hwApProfAlarmRestrictionSwitch
This object indicates the status of the alarm suppression switch. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.25
hwApProfAlarmRestrictionPeriod
This object indicates the alarm suppression period. The default value is 60 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.26
hwApProfKeepServiceSwitch
This object indicates whether to enable the offline service retaining function. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.27
hwApProfProtectPriority
This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.28
hwApProfProtectACIp
This object indicates the IP address of the standby AC.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.29
hwApProfStatInterval
Description.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.3
hwApProfProtectACIpv6
This object indicates the IPv6 address of the standby AC.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.30
hwApProfEapStartMode
This object indicates the EAP Start packet conversion mode. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.31
hwApProfEapStartTransform
This object indicates the EAP Start packet conversion mode. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.32
hwApProfEapStartUnicastMac
This object indicates that EAP Start packets are converted to those with specific MAC addresses.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.33
hwApProfEapResponseMode
This object indicates the EAP Response packet conversion mode. The default value is 4.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.34
hwApProfEapResponseTransform
This object indicates the EAP Response packet conversion mode. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.35
hwApProfEapResponseUnicastMac
This object indicates that EAP Response packets are converted to those with specific MAC addresses.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.36
hwApProfLldpRestartDelay
This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.37
hwApProfLldpAdminStatus
This object indicates the operation mode of LLDP. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.38
hwApProfLldpRetransDelay
This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.39
hwApProfSampleTime
This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.4
hwApProfLldpRetransHoldMultiplier
This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.40
hwApProfLldpInterval
This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.41
hwApProfLldpReportInterval
This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.42
hwApProfStaAccessMode
This object indicates the access mode. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.43
hwApProfStaAccessModeProfile
This object indicates blacklist and whitelist profiles.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.44
hwApProfRowStatus
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? R…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.139.11.1.12.1.45
hwApProfSFTPSwitch
This object indicates whether to enable the SFTP. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.46
hwApProfDynamicBlackListAgingTime
This object indicates the aging time of the dynamic blacklist entries. The default value is 300.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.47
hwApProfAntennaOutputMode
Description.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.48
hwApProfMppActiveReselectionSwitch
This object indicates of mpp active reselection.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.49
hwApProfLedSwitch
This object indicates whether to enable the AP's LED indicator. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.5
hwApProfSpectrumServerIPAddress
This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.50
hwApProfSpectrumServerIPv6Address
This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.51
hwApProfSpectrumServerPort
This object indicates the port of the spectrum analysis server. The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.52
hwApProfSpectrumViaACSwitch
This object indicates the status of the spectrum analysis function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.53
hwApProfSpectrumViaACPort
This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.54
hwApProfSpectrumNonWifiDeviceAgingTime
This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.55
hwApProfPoeMaxPower
This object indicates the maximum output power of the AP.The default value is 750000.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.56
hwApProfPoePowerReserved
This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 255.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.57
hwApProfPoePowerThreshold
This object indicates the alarm threshold of PoE power consumption percentage.The default value is 255.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.58
hwApProfPoeAfInrushSwitch
This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.59
hwApProfMaxStaNum
This object indicates the maximum number of access users on an AP. The default value is 128.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.6
hwApProfPoeHighInrushSwitch
This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.60
hwApProfPrimaryLinkIPv4
This object indicates the IP address of the primary AC.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.61
hwApProfPrimaryLinkIPv6
This object indicates the IPv6 address of the primary AC.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.62
hwApProfBackupLinkIPv4
This object indicates the IP address of the backup AC.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.12.1.63
hwApProfBackupLinkIPv6
This object indicates the IPv6 address of the backup AC.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.64
hwApProfLedOffTimeRange
This object indicates whether to make a configured Led off time range effective.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.65
hwApProfUsbSwitch
This object indicates whether to enable the USB. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.66
hwApProfBroadcastSuppressionArpEnable
This object indicates whether to enable the arp broadcast suppression.The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.67
hwApProfBroadcastSuppressionArpThreshold
This object indicates the threshold of arp broadcast suppression. The default value is 256.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.68
hwApProfBroadcastSuppressionIgmpEnable
This object indicates whether to enable the igmp broadcast suppression.The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.69
hwApProfMtu
This object indicates the MTU of an AP interface. The default value is 1500.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.7
hwApProfBroadcastSuppressionIgmpThreshold
This object indicates the threshold of igmp broadcast suppression. The default value is 256.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.70
hwApProfBroadcastSuppressionNdEnable
This object indicates whether to enable the nd broadcast suppression.The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.71
hwApProfBroadcastSuppressionNdThreshold
This object indicates the threshold of nd broadcast suppression. The default value is 256.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.72
hwApProfBroadcastSuppressionOtherEnable
This object indicates whether to enable the other broadcast suppression.The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.73
hwApProfBroadcastSuppressionOtherThreshold
This object indicates the threshold of other broadcast suppression. The default value is 256.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.74
hwApProfBroadcastSuppressionAllEnable
This object indicates whether to enable all the broadcast suppression.The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.75
hwApProfCapwapDtlsDataSwitch
This object indicates the status of the DTLS function of data-link. The default value is 3.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.76
hwApProfTemporaryManagementPsk
This object indicates the psk of the AP-based offline VAP.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.77
hwApProfProtectLinkSwitchEchoProbeTime
This object indicates the time of echo probe. The default value is 20.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.79
hwApProfMeshRole
This object indicates a Mesh role. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.8
hwApProfProtectLinkSwitchStartThreshold
This object indicates the start threshold of packet-loss rate. The default value is 20.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.80
hwApProfProtectLinkSwitchGapThreshold
This object indicates the gap threshold of packet-loss rate. The default value is 15.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.81
hwApProfCardConnectType
Description.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.82
hwApProfLldpReportEnable
This object indicates whether to enable the lldp report .The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.83
hwApProfDhcpv4Option12
This object indicates the type of dhcpve option12 .The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.84
hwApProfBcSuppresionAutoDetectThreshold
This object indicates the value of broadcast value .The default value is 256.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.85
hwApProfMcSuppresionAutoDetectThreshold
This object indicates the value of multicast value .The default value is 256.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.86
hwApProfUcSuppresionAutoDetectThreshold
This object indicates the value of unicast value .The default value is 256.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.87
hwApProfConsoleBLEMode
This object indicates the type of ble console .The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.88
hwApProfDiskUsageThreshold
This object indicates the AP disk usage rate alarm threshold. The default value is 95.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.89
hwApProfTemporaryManagement
This object indicates the status of the AP-based offline VAP switch. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.9
hwApProfLogServerPort
This object indicates syslog server port. The default value is 514.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.90
hwApProfStationConnectivityDetectSwitch
This object indicates whether to disable the Station Connectivity Detect. The default value is enable.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.91
hwApProfStaArpNDProxyBeforeAssoc
This object indicates the mode of the station arp-nd-proxy before association .The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.92
hwApProfUcSuppressionAutoDetectSwitch
This object indicates the switch of the unicast-suppression auto detect .The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.93
hwApProfPkiCertFileType
This object indicates the AP PKI certificate file type.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.12.1.94
hwApProfPkiCertFileName
This object indicates the AP PKI certificate filename.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.95
hwApProfPkiCertFilePassword
This object indicates the AP PKI certificate file password.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.12.1.96
hwApProfHighTempApEnvironmentThreshold
Description.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.97
hwApProfHighTempCpuThreshold
Description.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.98
hwApProfHighTempNpThreshold
Description.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.12.1.99