hwVOPINPDelayConfProfShineRatioRtxUs
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.16.1.21
Object
column
r/w
Unsigned32
If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.16.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVOPINPDelayConfProfEntry
- Table
- hwVOPINPDelayConfProfTable
- Siblings
- 39
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPINPDelayConfProfIndex The hwVOPINPDelayConfProfIndex identifies a row in the hwVOPINPDelayConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.1 |
| hwVOPINPDelayConfProfMaxDelayVar This optional VDSL2 specific parameter specifies the maximum value
for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254 units of 0.1 milliseconds (i.e.,… | column | 0.1 milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.10 |
| hwVOPINPDelayConfProfInitPolicy If retransmission is not used in a given transmit direction, this parameter indicates
which policy shall be applied to determine the transceiver configuration parameters at
initi… | column | Xdsl2ChInitPolicy | .1.3.6.1.4.1.2011.6.144.1.1.16.1.11 |
| hwVOPINPDelayConfProfMaxDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.12 |
| hwVOPINPDelayConfProfMaxDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.13 |
| hwVOPINPDelayConfProfMinDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.14 |
| hwVOPINPDelayConfProfMinDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.15 |
| hwVOPINPDelayConfProfMinInpShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.16 |
| hwVOPINPDelayConfProfMinInpShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.17 |
| hwVOPINPDelayConfProfMinInp8ShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.18 |
| hwVOPINPDelayConfProfMinInp8ShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.19 |
| hwVOPINPDelayConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be de… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.16.1.2 |
| hwVOPINPDelayConfProfShineRatioRtxDs If retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.20 |
| hwVOPINPDelayConfProfMinInpReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.22 |
| hwVOPINPDelayConfProfMinInpReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.23 |
| hwVOPINPDelayConfProfMinInp8ReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.24 |
| hwVOPINPDelayConfProfMinInp8ReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.25 |
| hwVOPINPDelayConfProfIatReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an… | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.26 |
| hwVOPINPDelayConfProfIatReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an … | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.27 |
| hwVOPINPDelayConfProfMaxDelayOctetSplit The line configuration parameter MAXDELAYOCTET-split (MDOSPLIT) defines the percentage of the MAXDELAYOCTET_ext
if operating in ITU-T G.998.4 or MAXDELAYOCTET in other cases allo… | column | percents Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.28 |
| hwVOPGfastINPDelayConfProfMaxDelayRtxDs This parameter specifies the G.fast downstream maximum allowed delay for retransmission.
The delay values range from 1 to 63 ms in steps of 0.25 ms.
Unit: 0.25 milliseconds. | column | 0.25 milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.29 |
| hwVOPINPDelayConfProfDescription The hwVOPINPDelayConfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.16.1.3 |
| hwVOPGfastINPDelayConfProfMaxDelayRtxUs This parameter specifies the G.fast upstream maximum allowed delay for retransmission.
The delay values range from 1 to 63 ms in steps of 0.25 ms.
Unit: 0.25 milliseconds. | column | 0.25 milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.30 |
| hwVOPGfastINPDelayConfProfMinInpShineRtxDs This parameter specifies the G.fast downstream minimum impulse noise protection against SHINE for the bearer channel
if it is transported over DMT symbols with a subcarrier spaci… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.31 |
| hwVOPGfastINPDelayConfProfMinInpShineRtxUs This parameter specifies the G.fast upstream minimum impulse noise protection against SHINE for the bearer channel
if it is transported over DMT symbols with a subcarrier spacing… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.32 |
| hwVOPGfastINPDelayConfProfShineRatioRtxDs This parameter specifies the G.fast downstream SHINE ratio.
The values range from 0 to 0.1 in increments of 0.001. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.33 |
| hwVOPGfastINPDelayConfProfShineRatioRtxUs This parameter specifies the G.fast upstream SHINE ratio.
The values range from 0 to 0.1 in increments of 0.001. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.34 |
| hwVOPGfastINPDelayConfProfMinInpReinRtxDs This parameter specifies the G.fast downstream minimum impulse noise protection against REIN for the bearer channel
if it is transported over DMT symbols with a subcarrier spacin… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.35 |
| hwVOPGfastINPDelayConfProfMinInpReinRtxUs This parameter specifies the G.fast upstream minimum impulse noise protection against REIN for the bearer channel
if it is transported over DMT symbols with a subcarrier spacing … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.36 |
| hwVOPGfastINPDelayConfProfIatReinRtxDs This parameter specifies the G.fast downstream inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a… | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.37 |
| hwVOPGfastINPDelayConfProfIatReinRtxUs This parameter specifies the G.fast upstream inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a R… | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.38 |
| hwVOPGfastINPDelayConfProfMinRNRatioRtxDs This parameter specifies the G.fast downstream minimum Reed-Solomon RFEC/NFEC ratio.
The ratio is computed as the number of redundancy bytes (RFEC) divided by the total
number o… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.39 |
| hwVOPINPDelayConfProfMinProtectionDs If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
protection for the downstream bearer channel if it is transported over D… | column | symbols Xdsl2SymbolProtection | .1.3.6.1.4.1.2011.6.144.1.1.16.1.4 |
| hwVOPGfastINPDelayConfProfMinRNRatioRtxUs This parameter specifies the G.fast upstream minimum Reed-Solomon RFEC/NFEC ratio.
The ratio is computed as the number of redundancy bytes (RFEC) divided by the total
number of b… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.40 |
| hwVOPINPDelayConfProfMinProtection8Ds If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
protection for the downstream bearer channel if it is transported over D… | column | symbols Xdsl2SymbolProtection8 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.5 |
| hwVOPINPDelayConfProfMaxDelayDs If retransmission is not used in downstream direction, this parameter is the maximum one-way
interleaving delay introduced by the PMS-TC on downstream direction.
The xTUs shall c… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.6 |
| hwVOPINPDelayConfProfMinProtectionUs If retransmission is not used in upstream direction, this parameter specifies the minimum
impulse noise protection for the upstream bearer channel if it is transported over DMT s… | column | symbols Xdsl2SymbolProtection | .1.3.6.1.4.1.2011.6.144.1.1.16.1.7 |
| hwVOPINPDelayConfProfMinProtection8Us If retransmission is not used in upstream direction, this parameter specifies the minimum
impulse noise protection for the upstream bearer channel if it is transported over DMT s… | column | symbols Xdsl2SymbolProtection8 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.8 |
| hwVOPINPDelayConfProfMaxDelayUs If retransmission is not used in upstream direction, this parameter is the maximum one-way
interleaving delay introduced by the PMS-TC on upstream direction.
The xTUs shall choos… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.9 |