hwVOPINPDelayConfProfInitPolicy
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.16.1.11
Object
column
r/w
Xdsl2ChInitPolicy
If retransmission is not used in a given transmit direction, this parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY are 0,1 and 2. Those policies are defined in the respective Recommendations.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.16.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVOPINPDelayConfProfEntry
- Table
- hwVOPINPDelayConfProfTable
- Siblings
- 39
Syntax
Xdsl2ChInitPolicy
- Source
- Xdsl2ChInitPolicy
- Base type
Enumeration
Values & Constraints
Type Values
1 | policy0 |
2 | policy1 |
3 | policy2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPINPDelayConfProfIndex The hwVOPINPDelayConfProfIndex identifies a row in the hwVOPINPDelayConfProfTable. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.1 |
| hwVOPINPDelayConfProfMaxDelayVar This optional VDSL2 specific parameter specifies the maximum value
for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254 units of 0.1 milliseconds (i.e.,… | column | 0.1 milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.10 |
| hwVOPINPDelayConfProfMaxDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.12 |
| hwVOPINPDelayConfProfMaxDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.13 |
| hwVOPINPDelayConfProfMinDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.14 |
| hwVOPINPDelayConfProfMinDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.15 |
| hwVOPINPDelayConfProfMinInpShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.16 |
| hwVOPINPDelayConfProfMinInpShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.17 |
| hwVOPINPDelayConfProfMinInp8ShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.18 |
| hwVOPINPDelayConfProfMinInp8ShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.19 |
| hwVOPINPDelayConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be de… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.144.1.1.16.1.2 |
| hwVOPINPDelayConfProfShineRatioRtxDs If retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.20 |
| hwVOPINPDelayConfProfShineRatioRtxUs If retransmission is used in upstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.0… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.21 |
| hwVOPINPDelayConfProfMinInpReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.22 |
| hwVOPINPDelayConfProfMinInpReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.23 |
| hwVOPINPDelayConfProfMinInp8ReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.24 |
| hwVOPINPDelayConfProfMinInp8ReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.25 |
| hwVOPINPDelayConfProfIatReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an… | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.26 |
| hwVOPINPDelayConfProfIatReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an … | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.27 |
| hwVOPINPDelayConfProfMaxDelayOctetSplit The line configuration parameter MAXDELAYOCTET-split (MDOSPLIT) defines the percentage of the MAXDELAYOCTET_ext
if operating in ITU-T G.998.4 or MAXDELAYOCTET in other cases allo… | column | percents Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.28 |
| hwVOPGfastINPDelayConfProfMaxDelayRtxDs This parameter specifies the G.fast downstream maximum allowed delay for retransmission.
The delay values range from 1 to 63 ms in steps of 0.25 ms.
Unit: 0.25 milliseconds. | column | 0.25 milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.29 |
| hwVOPINPDelayConfProfDescription The hwVOPINPDelayConfProfDescription contains an optional human readable description for the profile. | column | OctetString | .1.3.6.1.4.1.2011.6.144.1.1.16.1.3 |
| hwVOPGfastINPDelayConfProfMaxDelayRtxUs This parameter specifies the G.fast upstream maximum allowed delay for retransmission.
The delay values range from 1 to 63 ms in steps of 0.25 ms.
Unit: 0.25 milliseconds. | column | 0.25 milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.30 |
| hwVOPGfastINPDelayConfProfMinInpShineRtxDs This parameter specifies the G.fast downstream minimum impulse noise protection against SHINE for the bearer channel
if it is transported over DMT symbols with a subcarrier spaci… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.31 |
| hwVOPGfastINPDelayConfProfMinInpShineRtxUs This parameter specifies the G.fast upstream minimum impulse noise protection against SHINE for the bearer channel
if it is transported over DMT symbols with a subcarrier spacing… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.32 |
| hwVOPGfastINPDelayConfProfShineRatioRtxDs This parameter specifies the G.fast downstream SHINE ratio.
The values range from 0 to 0.1 in increments of 0.001. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.33 |
| hwVOPGfastINPDelayConfProfShineRatioRtxUs This parameter specifies the G.fast upstream SHINE ratio.
The values range from 0 to 0.1 in increments of 0.001. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.34 |
| hwVOPGfastINPDelayConfProfMinInpReinRtxDs This parameter specifies the G.fast downstream minimum impulse noise protection against REIN for the bearer channel
if it is transported over DMT symbols with a subcarrier spacin… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.35 |
| hwVOPGfastINPDelayConfProfMinInpReinRtxUs This parameter specifies the G.fast upstream minimum impulse noise protection against REIN for the bearer channel
if it is transported over DMT symbols with a subcarrier spacing … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.36 |
| hwVOPGfastINPDelayConfProfIatReinRtxDs This parameter specifies the G.fast downstream inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a… | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.37 |
| hwVOPGfastINPDelayConfProfIatReinRtxUs This parameter specifies the G.fast upstream inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a R… | column | Enumeration | .1.3.6.1.4.1.2011.6.144.1.1.16.1.38 |
| hwVOPGfastINPDelayConfProfMinRNRatioRtxDs This parameter specifies the G.fast downstream minimum Reed-Solomon RFEC/NFEC ratio.
The ratio is computed as the number of redundancy bytes (RFEC) divided by the total
number o… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.39 |
| hwVOPINPDelayConfProfMinProtectionDs If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
protection for the downstream bearer channel if it is transported over D… | column | symbols Xdsl2SymbolProtection | .1.3.6.1.4.1.2011.6.144.1.1.16.1.4 |
| hwVOPGfastINPDelayConfProfMinRNRatioRtxUs This parameter specifies the G.fast upstream minimum Reed-Solomon RFEC/NFEC ratio.
The ratio is computed as the number of redundancy bytes (RFEC) divided by the total
number of b… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.40 |
| hwVOPINPDelayConfProfMinProtection8Ds If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
protection for the downstream bearer channel if it is transported over D… | column | symbols Xdsl2SymbolProtection8 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.5 |
| hwVOPINPDelayConfProfMaxDelayDs If retransmission is not used in downstream direction, this parameter is the maximum one-way
interleaving delay introduced by the PMS-TC on downstream direction.
The xTUs shall c… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.6 |
| hwVOPINPDelayConfProfMinProtectionUs If retransmission is not used in upstream direction, this parameter specifies the minimum
impulse noise protection for the upstream bearer channel if it is transported over DMT s… | column | symbols Xdsl2SymbolProtection | .1.3.6.1.4.1.2011.6.144.1.1.16.1.7 |
| hwVOPINPDelayConfProfMinProtection8Us If retransmission is not used in upstream direction, this parameter specifies the minimum
impulse noise protection for the upstream bearer channel if it is transported over DMT s… | column | symbols Xdsl2SymbolProtection8 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.8 |
| hwVOPINPDelayConfProfMaxDelayUs If retransmission is not used in upstream direction, this parameter is the maximum one-way
interleaving delay introduced by the PMS-TC on upstream direction.
The xTUs shall choos… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.144.1.1.16.1.9 |