hwRTCPPackageSendInterval
HUAWEI-VOIP-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.36.1.25.7
Object
scalar
r/w
Integer32
Indicates the RTCP packet sending interval of DSP channel. The valid value must be no less than 500, 0 indicates that the parameter is disabled. Unit: millisecond
Context
- MIB
- HUAWEI-VOIP-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.25.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwDspAttributeTable
- Siblings
- 37
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwFaxMaxTrainRate Indicates the maximum fax training rate.
Options:
1. v17(1) -V17
2. v29(2) -V29
3. v27(3) -V27
Default: v17(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.1 |
| hwDSPSilenceReduce Indicates the default silence compression switch of DSP channel.
It is unavailable in the SIP.
Options:
1. disable(1) -disable silence compression
2. enable(2) -enable silence co… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.10 |
| hwDSPNeedStatisOrNot Indicate whether DSP channel needs the channel statistics.
It is unavailable in the SIP.
Options:
1. disable(1) -close
2. enable(2) -open | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.11 |
| hwDSPClearmodePayload Indicates the default payload type of the DSP channel clearmode (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.12 |
| hwSevereDegradethreshold Indicates the default threshold of severely packet loss seconds. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.13 |
| hwBvqm Indicates the VQM switch.
Options:
1. disable(1) -disable
2. enable(2) -enable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.14 |
| hwDSPPlc Indicates the DSP packet loss compensation algorithm.
Options:
1. disable(1) -disable
2. enable(2) -enable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.15 |
| hwDSPMinAdaptJitterBuffer Minimum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.16 |
| hwDSPMaxAdaptJitterBuffer Maximum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.17 |
| hwDSPInitAdaptJitterBuffer Initial adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.18 |
| hwDSPMinFixedJitterBuffer Minimum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer <ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.19 |
| hwFaxTrainMode Indicates the fax training mode.
Options:
1. remoteTrain(1) -remote train
2. localTrain(2) -local train | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.2 |
| hwDSPMaxFixedJitterBuffer Maximum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.20 |
| hwDSPNormalFixedJitterBuffer Initial fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.21 |
| hw2198Payload Indicates the payload type value of 2198 (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.22 |
| hwRedundancyT30 Indicates the T30 redundancy parameter of T38 Fax. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.23 |
| hwRedundancyT4 Indicates the T4 redundancy parameter of T38 Fax. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.24 |
| hwDSPRTCPXR The switch of RTCP XR.
Options:
1. enable(1) -enable RTCP XR
2. disable(2) -disable RTCP XR | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.25 |
| hwG726R32kPayload Indicates the payload type value of G.726-32k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.26 |
| hwFaxV8Negotiate Indicates the switch of the V8 negotiation of FAX.
Options:
1. enable(1) -enable
2. disable(2) -disable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.27 |
| hwDSPModeJitterBuffer Set JitterBuffer mode of DSP channel.
Options:
1. adaptive(1) -adaptive
2. fixed(2) -fixed | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.28 |
| hwVbdPayload Indicates the payload type value of VBD (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.29 |
| hwDSPMaxJitterBuffer obsolete Indicates the max JitterBuffer value of DSP channel.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.3 |
| hwRfc2833Payload Indicates the payload type value of RFC2833 (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.30 |
| hwG726R16kPayload Indicates the payload type value of G.726-16k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.31 |
| hwG726R24kPayload Indicates the payload type value of G.726-24k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.32 |
| hwG726R40kPayload Indicates the payload type value of G.726-40k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.33 |
| hwDspAutoVBDSwitchMode VBD switch mode.
Options:
1. hostControl(1) -host control
2. autoSwitch(2) -auto switch | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.34 |
| hwDSPAlarmAdaptJitterBuffer Adapt jitterbuffer of DSP alarm threshold.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.35 |
| hwDspFixedJbUpImmediately Enable DSP fixed JB adjust upward immediately or not.
Options:
1. enable(1) -enable
2. disable(2) -disable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.36 |
| hwDspMediaBreakTimer Media Break Timer. 0-indicates that the detection is disabled.
Unit: second | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.37 |
| hwCngLevel Comfort noise generation level.
Unit: -dB | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.38 |
| hwDSPAttrInputGain obsolete Indicates the input gain of DSP chip (0-15 correspond to -10 dB to +5 dB). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.4 |
| hwDSPAttrOutputGain obsolete Indicates the output gain of DSP chip (0-20 correspond to -10 dB to +10 dB). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.5 |
| hwDSPCodeType Indicates the default coding type of DSP channel.
It is unavailable in the SIP
Options:
1. g711A(1) -G.711A
2. g711u(2) -G.711U
3. g723(3) -G.723
4. g729(4) -G.729
5. g726by16k(… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.6 |
| hwDSPRtpPacketInterval Indicates the default RTP packet time of DSP channel.
Options:
1. packettime5ms(5) - 5ms
2. packettime10ms(10) - 10ms
3. packettime20ms(20) - 20ms
4. packettime30ms(30) - 30ms | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.8 |
| hwDSPEchoCheck Indicates the default echo check switch of DSP channel.
It is unavailable in the SIP.
Options:
1. disable(1) -disable
2. enable(2) -enable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.9 |