hwDspAttributeTable
HUAWEI-VOIP-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.36.1.25
Object
node
No description available.
Context
- MIB
- HUAWEI-VOIP-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.25- Type
- node
- Parent
- hwIASVoipObjects
- Siblings
- 42
- Children
- 38
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMgRingTypeMapTable This table is used to set the ring type mapping.
The indexes of this table are hwMgRingTypeMapMgId, hwMgRingTypeMapRingId. | table | - | .1.3.6.1.4.1.2011.6.36.1.11 |
| hwMgCallInfoTable This table is use to query the information in the call.
The index of this table is hwMgCallInfoIndex. | table | - | .1.3.6.1.4.1.2011.6.36.1.12 |
| hwDtmfParametersTable | node | - | .1.3.6.1.4.1.2011.6.36.1.152 |
| hwServiceNumCfgTable This table is used to config the binding between service number and DSP parameters template.
The index of this table is hwServiceNumMap. | table | - | .1.3.6.1.4.1.2011.6.36.1.154 |
| hwDspParaTemplateCfgTable This table is used to config the dsp parameters template.
The index of this table is hwDspTemplateName. | table | - | .1.3.6.1.4.1.2011.6.36.1.155 |
| hwPreDigitMapConfigTable This table is used to config local global digitmap for sip and h248 interface.
The indexes of this table are hwPreDigitMapName, hwPreDigitMapSliceNo. | table | - | .1.3.6.1.4.1.2011.6.36.1.156 |
| hwVoipDynIPNameTable This table is used to query the voip dynamic media and signal IP name.
The indexes of this table are hwVoipDynIPNameType, hwVoipDynIPNameIndex. | table | - | .1.3.6.1.4.1.2011.6.36.1.157 |
| hwDspOverloadResourceCfgTable | node | - | .1.3.6.1.4.1.2011.6.36.1.182 |
| hwRfc2198ParaTable | node | - | .1.3.6.1.4.1.2011.6.36.1.183 |
| hwRfc2198SmartParaTable | node | - | .1.3.6.1.4.1.2011.6.36.1.184 |
| hwTlsParaCfgTable This table is used to set the tls attribute.
The index of this table is hwTlsParaInterfaceId. | table | - | .1.3.6.1.4.1.2011.6.36.1.185 |
| hwTlsRunStateInfoTable This table is used to display the tls running information.
The index of this table is hwTlsRunStateInfoSessionID. | table | - | .1.3.6.1.4.1.2011.6.36.1.186 |
| hwTlsCertificateTable This table is used to config and query the certificates in system.
The indexes of this table are hwTlsCertificateType and hwTlsCertificateIndex. | table | - | .1.3.6.1.4.1.2011.6.36.1.187 |
| hwIpTrkGrpFaxParaTable This table is used to config the fax parameter of a IP truck group.
The index of this table is hwIpTrkGrpFaxParaGrpName. | table | - | .1.3.6.1.4.1.2011.6.36.1.188 |
| hwIpTrkGrpModemParaTable This table is used to config the modem parameter of a IP truck group.
The index of this table is hwIpTrkGrpModemParaGrpName. | table | - | .1.3.6.1.4.1.2011.6.36.1.189 |
| hwIpTrkGrpRfc2833Table This table is used to config the rfc2833 parameter of a IP truck group.
The index of this table is hwIpTrkGrpRfc2833GrpName. | table | - | .1.3.6.1.4.1.2011.6.36.1.190 |
| hwIpTrkGrpRfc2198Table This table is used to config the rfc2198 parameter of a IP truck group.
The index of this table is hwIpTrkGrpRfc2198GrpName. | table | - | .1.3.6.1.4.1.2011.6.36.1.191 |
| hwIpTrkGrpDtmfParaTable This table is used to config the dtmf parameter of a IP truck group.
The index of this table is hwIpTrkGrpDtmfGrpName. | table | - | .1.3.6.1.4.1.2011.6.36.1.192 |
| hwDspResourceTypeTable This table is used to config the DSP resource type.
The index of this table is hwDspResourceTypeIndex. | table | - | .1.3.6.1.4.1.2011.6.36.1.193 |
| hwDigitMapGroupConfigTable This table is used to config the digitmap group.
The index of this table is hwDigitMapGroupName. | table | - | .1.3.6.1.4.1.2011.6.36.1.194 |
| hwMgRingDefaultMgcParaTable This table is used to config the default type for the common ring.
The index of this table is hwMgRingDefaultMgcParaMgId. | table | - | .1.3.6.1.4.1.2011.6.36.1.196 |
| hwIpTrkGrpTlsParaCfgTable This table is used to set the tls attribute.
The index of this table is hwIpTrkGrpTlsParaGrpName. | table | - | .1.3.6.1.4.1.2011.6.36.1.197 |
| hwMgRingDefaultRingParaTable This table is used to set the default short ring type and AOCE ring type.
The index of this table is hwMgRingDefaultRingparaMgId. | table | - | .1.3.6.1.4.1.2011.6.36.1.198 |
| hwVGWNumberChangeTable This table is used to set the scheme od number change.
The index of this table is hwVGWNumberChangeName. | table | - | .1.3.6.1.4.1.2011.6.36.1.199 |
| hwSRTPParameterTable | node | - | .1.3.6.1.4.1.2011.6.36.1.200 |
| hwTranslationRuleConfigTable This table is used to set the translation rule.
The index of this table is hwTranslationRuleName. | table | - | .1.3.6.1.4.1.2011.6.36.1.201 |
| hwTranslationRuleSetTable This table is used to config the translation rule set.
The index of this table is hwTranslationRuleSetName. | table | - | .1.3.6.1.4.1.2011.6.36.1.202 |
| hwMgStreamQosConfigTable This table is used to set the IP stream QOS of different VAG.
The indexes of this table are hwMgStreamQosCfgProtoType and hwMgStreamQosCfgInterfaceId. | table | - | .1.3.6.1.4.1.2011.6.36.1.203 |
| hwFaxParametersTable | node | - | .1.3.6.1.4.1.2011.6.36.1.26 |
| hwModemParametersTable | node | - | .1.3.6.1.4.1.2011.6.36.1.27 |
| hwMgDspWorkModeTable | node | - | .1.3.6.1.4.1.2011.6.36.1.33 |
| hwBandwidthParaTable | node | - | .1.3.6.1.4.1.2011.6.36.1.35 |
| hwUserStatisticTable This table is used to query the statistics of online subscribers.
The index of this table is hwUserStatisticMgId. | table | - | .1.3.6.1.4.1.2011.6.36.1.36 |
| hwProtocolSupportTable | node | - | .1.3.6.1.4.1.2011.6.36.1.43 |
| hwE2ETraceTaskTable This table is used to config the E2E tracing task.
The index of this table is hwE2ETraceTaskID. | table | - | .1.3.6.1.4.1.2011.6.36.1.45 |
| hwE2ETraceTaskAttrTable | node | - | .1.3.6.1.4.1.2011.6.36.1.46 |
| hwQosThresholdTable | node | - | .1.3.6.1.4.1.2011.6.36.1.59 |
| hwClipParametersCfgTable | node | - | .1.3.6.1.4.1.2011.6.36.1.62 |
| hwTidTemplateConfigTable This table is used to config terminal ID template.
The index of this table is hwTidTemplateId. | table | - | .1.3.6.1.4.1.2011.6.36.1.65 |
| hwVoipCommonObjects | node | - | .1.3.6.1.4.1.2011.6.36.1.69 |
| hwMgDspOperateTable This table is used to config the operation of DSP channel.
The index of this table is hwMgDspOperIndex. | table | - | .1.3.6.1.4.1.2011.6.36.1.8 |
| hwMgDspStatisticsTable This table is used to query the DSP channel statistics.
The index of this table is hwMgDspStatisticsIndex. | table | - | .1.3.6.1.4.1.2011.6.36.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwFaxMaxTrainRate Indicates the maximum fax training rate.
Options:
1. v17(1) -V17
2. v29(2) -V29
3. v27(3) -V27
Default: v17(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.1 |
| hwDSPSilenceReduce Indicates the default silence compression switch of DSP channel.
It is unavailable in the SIP.
Options:
1. disable(1) -disable silence compression
2. enable(2) -enable silence co… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.10 |
| hwDSPNeedStatisOrNot Indicate whether DSP channel needs the channel statistics.
It is unavailable in the SIP.
Options:
1. disable(1) -close
2. enable(2) -open | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.11 |
| hwDSPClearmodePayload Indicates the default payload type of the DSP channel clearmode (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.12 |
| hwSevereDegradethreshold Indicates the default threshold of severely packet loss seconds. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.13 |
| hwBvqm Indicates the VQM switch.
Options:
1. disable(1) -disable
2. enable(2) -enable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.14 |
| hwDSPPlc Indicates the DSP packet loss compensation algorithm.
Options:
1. disable(1) -disable
2. enable(2) -enable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.15 |
| hwDSPMinAdaptJitterBuffer Minimum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.16 |
| hwDSPMaxAdaptJitterBuffer Maximum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.17 |
| hwDSPInitAdaptJitterBuffer Initial adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.18 |
| hwDSPMinFixedJitterBuffer Minimum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer <ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.19 |
| hwFaxTrainMode Indicates the fax training mode.
Options:
1. remoteTrain(1) -remote train
2. localTrain(2) -local train | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.2 |
| hwDSPMaxFixedJitterBuffer Maximum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.20 |
| hwDSPNormalFixedJitterBuffer Initial fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.21 |
| hw2198Payload Indicates the payload type value of 2198 (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.22 |
| hwRedundancyT30 Indicates the T30 redundancy parameter of T38 Fax. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.23 |
| hwRedundancyT4 Indicates the T4 redundancy parameter of T38 Fax. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.24 |
| hwDSPRTCPXR The switch of RTCP XR.
Options:
1. enable(1) -enable RTCP XR
2. disable(2) -disable RTCP XR | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.25 |
| hwG726R32kPayload Indicates the payload type value of G.726-32k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.26 |
| hwFaxV8Negotiate Indicates the switch of the V8 negotiation of FAX.
Options:
1. enable(1) -enable
2. disable(2) -disable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.27 |
| hwDSPModeJitterBuffer Set JitterBuffer mode of DSP channel.
Options:
1. adaptive(1) -adaptive
2. fixed(2) -fixed | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.28 |
| hwVbdPayload Indicates the payload type value of VBD (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.29 |
| hwDSPMaxJitterBuffer obsolete Indicates the max JitterBuffer value of DSP channel.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.3 |
| hwRfc2833Payload Indicates the payload type value of RFC2833 (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.30 |
| hwG726R16kPayload Indicates the payload type value of G.726-16k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.31 |
| hwG726R24kPayload Indicates the payload type value of G.726-24k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.32 |
| hwG726R40kPayload Indicates the payload type value of G.726-40k (it must not conflict with the payload used). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.33 |
| hwDspAutoVBDSwitchMode VBD switch mode.
Options:
1. hostControl(1) -host control
2. autoSwitch(2) -auto switch | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.34 |
| hwDSPAlarmAdaptJitterBuffer Adapt jitterbuffer of DSP alarm threshold.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.35 |
| hwDspFixedJbUpImmediately Enable DSP fixed JB adjust upward immediately or not.
Options:
1. enable(1) -enable
2. disable(2) -disable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.36 |
| hwDspMediaBreakTimer Media Break Timer. 0-indicates that the detection is disabled.
Unit: second | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.37 |
| hwCngLevel Comfort noise generation level.
Unit: -dB | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.38 |
| hwDSPAttrInputGain obsolete Indicates the input gain of DSP chip (0-15 correspond to -10 dB to +5 dB). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.4 |
| hwDSPAttrOutputGain obsolete Indicates the output gain of DSP chip (0-20 correspond to -10 dB to +10 dB). | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.5 |
| hwDSPCodeType Indicates the default coding type of DSP channel.
It is unavailable in the SIP
Options:
1. g711A(1) -G.711A
2. g711u(2) -G.711U
3. g723(3) -G.723
4. g729(4) -G.729
5. g726by16k(… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.6 |
| hwRTCPPackageSendInterval Indicates the RTCP packet sending interval of DSP channel.
The valid value must be no less than 500, 0 indicates that the parameter is disabled.
Unit: millisecond | scalar | Integer32 | .1.3.6.1.4.1.2011.6.36.1.25.7 |
| hwDSPRtpPacketInterval Indicates the default RTP packet time of DSP channel.
Options:
1. packettime5ms(5) - 5ms
2. packettime10ms(10) - 10ms
3. packettime20ms(20) - 20ms
4. packettime30ms(30) - 30ms | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.8 |
| hwDSPEchoCheck Indicates the default echo check switch of DSP channel.
It is unavailable in the SIP.
Options:
1. disable(1) -disable
2. enable(2) -enable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.36.1.25.9 |