hwVectoringSingleWireInterruptionDetectionConfig
HUAWEI-VECTOR-MIB ·
.1.3.6.1.4.1.2011.6.171.1.11
Object
scalar
r/w
Enumeration
Enable/Disable the vectoring single-wire interruption detection. Default values:disable. Options: 1. enable(1) - Enables the vectoring detection configuration 2. disable(2) - Disables the vectoring detection configuration
Context
- MIB
- HUAWEI-VECTOR-MIB
- OID
.1.3.6.1.4.1.2011.6.171.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwVectoringGlobalConfig
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVectoringSwitch Enable/Disable the global vectoring configuration.
Warning: this operation will reactivate all the VDSL ports supporting vectoring and may take several minutes.
Default values:dis… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.1 |
| hwVectoringLimitProfChanProf The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table,
(Vdsl2ChanConfProfileTable) that applies to vectoring link when the line is activated… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.10 |
| hwVectoringCableType Cable type.
Default values: atis
Options:
1. atis(1) - ATIS
2. quad(2) - Quad
3. paperInsulated(3) - Paper Insulated
4. tp100(4) - TP100
5. other(5) … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.12 |
| hwVectoringLegacyCpeRatio Legacy CPE ratio.
Default values: 0
Options:
0: 1%~15%
1: 15%~25%
2: 25%~50%
3: >50% | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.13 |
| hwVectoringSingleWireInterruptionDectionMeltConfig Enable/Disable the vectoring melt detection.
This parameter must be used together with hwVectoringSingleWireInterruptionDetectionConfig.
This parameter is configurable only when h… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.14 |
| hwVectoringErbDetectLevel The level of detecting ERB(Errorcode Report Bloack) decide that how to judge the valid ERB.
Default values: 0
Options:
0: ERB validity detection.
1: ERB validity and ERB noise det… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.16 |
| hwVectoringReinEsDropThresholdDuringJoin In the joining, when the rate of dropped ES(Errorcode Sample) is larger than the threshold,
this line's percode coef don't be calculated and updated.
Default values: 75 | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.17 |
| hwVectoringReinEsDropThresholdDuringTrack In the tracking, when the rate of dropped ES is larger than the threshold,
this line's percode coef don't be calculated and updated.
Default values: 7 | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.18 |
| hwVectoringLimitProfLineSpectrumProf The value of this object identifies the row in the XDSL Line Spectrum Configuration Profile Table,
(hwVOPLineSpectrumConfProfTable) that applies to vectoring link when the line is… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.19 |
| hwVectoringLegacyCpeActivatePolicy Vectoring legacy cpe activate policy.
Default values:limit.
Options:
1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode
2. block(2… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.2 |
| hwVectoringLimitProfUpboProf The value of this object identifies the row in the XDSL Upbo Configuration Profile Table,
(hwVOPUPBOConfProfTable) that applies to vectoring link when the line is activated in non… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.20 |
| hwVectoringVpMode The value of this object identifies the vector vp-mode.
Default values:mode384.
Options:
1. mode192(1) - The 192 mode of vectoring board
2. mode384(2) - The 384 mode of vectorin… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.21 |
| hwVectoringLongLoopDectionConfig Enable/Disable the long loop detection.
This parameter must be used together with hwVectoringLongLoopPolicy when it is enabled.
Default values:disable.
Options:
1. disable(0) - D… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.22 |
| hwVectoringLongLoopInsertionLoss The value of this object identifies the long loop insertion loss.
This parameter must be used together with hwVectoringLongLoopDectionConfig.
This parameter is configurable only w… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.23 |
| hwVectoringLongLoopPolicy The value of this object identifies the long loop policy.
This parameter must be used together with hwVectoringLongLoopDectionConfig.
This parameter is configurable only when hwVe… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.24 |
| hwVectoringSingleWireInterruptionAutoShaping Enable/Disable the global vectoring Single Wire Interruption Auto Shaping.
This parameter must be used together with hwVectoringSingleWireInterruptionDetectionConfig.
This paramet… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.25 |
| hwVectoringGfastStartTone It is the global start tone for G.fast lines. In a G.fast and
VDSL hybrid scenario, you can configure this parameter to set
the start tone of the frequency band used by G.fast l… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.26 |
| hwVectoringFextCoefConfig The value of this object identifies whether the premium vectoring processing is enabled.
Default values : normal.
Options:
1. normal(1) - The premium vectoring processing i… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.27 |
| hwVectoringCpeWhiteListConfig Enable/Disable the global vectoring cpe white list configuration.
Default values: disable.
Options:
1. enable(1) - Enable the global vectoring cpe white list configuration.
2. … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.28 |
| hwVectoringCpeWhiteList This object defines the global vectoring cpe white list.
This is a string of 4 bytes of values indicates the type of vectoring cpe.
Default values: BDCMTRID.
the default value ca… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.29 |
| hwVectoringBandplanType Vectoring global frequency plan types.
Default values:bandplan998ade.
Options:
1. bandplanAnnexa(1) - The frequency plan types for the vectoring feature is Annex A
2. ba… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.3 |
| hwVectoringVpBoardMode The value of this object identifies the vector vp-board-mode.
Default values:fast.
Options:
1. fast(1) - The G.fast mode of vectoring board
2. vdsl(2) - The vdsl mode of vec… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.30 |
| hwVectoringUs0Type Vectoring us0 type.
Default values:us0TypeA.
Options:
1. us0TypeA(1) - US0 type is US0-type A
2. us0TypeB(2) - US0 type is US0-type B
3. us0TypeM(3) - US0 type is U… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.4 |
| hwVectoringAnnexALimitMask AnnexA limit mask.
Options:
1. d32(1) - AnnexA limit mask is D-32
2. d48(2) - AnnexA limit mask is D-48
3. d64(3) - AnnexA limit mask is D-64
4. d128(4)… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.5 |
| hwVectoringLegacyCpeReservedBand This object is used to set the reserved band of a legacy CPE.
The PSD on the frequency band is not shaped and the frequency band can carry traffic.
This object takes effect when h… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.6 |
| hwVectoringLegacyCpeToneBlackoutBand This object is used to set the blackout band of a legacy CPE.
The blackout frequency band is disabled and cannot carry traffic.
This object takes effect when hwVectoringLegacyCpeA… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.7 |
| hwVectoringLimitProfDsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activat… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.8 |
| hwVectoringLimitProfUsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activat… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.9 |