hwVectoringLongLoopInsertionLoss
HUAWEI-VECTOR-MIB ·
.1.3.6.1.4.1.2011.6.171.1.23
Object
scalar
r/w
Unsigned32
The value of this object identifies the long loop insertion loss. This parameter must be used together with hwVectoringLongLoopDectionConfig. This parameter is configurable only when hwVectoringLongLoopDectionConfig is enabled. Value 4294967295 means invalid value. Default values: 25 dB
Context
- MIB
- HUAWEI-VECTOR-MIB
- OID
.1.3.6.1.4.1.2011.6.171.1.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwVectoringGlobalConfig
- Siblings
- 28
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 20-40
range: 4294967295-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVectoringSwitch Enable/Disable the global vectoring configuration.
Warning: this operation will reactivate all the VDSL ports supporting vectoring and may take several minutes.
Default values:dis… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.1 |
| hwVectoringLimitProfChanProf The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table,
(Vdsl2ChanConfProfileTable) that applies to vectoring link when the line is activated… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.10 |
| hwVectoringSingleWireInterruptionDetectionConfig Enable/Disable the vectoring single-wire interruption detection.
Default values:disable.
Options:
1. enable(1) - Enables the vectoring detection configuration
2. disable(2) - Dis… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.11 |
| hwVectoringCableType Cable type.
Default values: atis
Options:
1. atis(1) - ATIS
2. quad(2) - Quad
3. paperInsulated(3) - Paper Insulated
4. tp100(4) - TP100
5. other(5) … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.12 |
| hwVectoringLegacyCpeRatio Legacy CPE ratio.
Default values: 0
Options:
0: 1%~15%
1: 15%~25%
2: 25%~50%
3: >50% | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.13 |
| hwVectoringSingleWireInterruptionDectionMeltConfig Enable/Disable the vectoring melt detection.
This parameter must be used together with hwVectoringSingleWireInterruptionDetectionConfig.
This parameter is configurable only when h… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.14 |
| hwVectoringErbDetectLevel The level of detecting ERB(Errorcode Report Bloack) decide that how to judge the valid ERB.
Default values: 0
Options:
0: ERB validity detection.
1: ERB validity and ERB noise det… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.16 |
| hwVectoringReinEsDropThresholdDuringJoin In the joining, when the rate of dropped ES(Errorcode Sample) is larger than the threshold,
this line's percode coef don't be calculated and updated.
Default values: 75 | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.17 |
| hwVectoringReinEsDropThresholdDuringTrack In the tracking, when the rate of dropped ES is larger than the threshold,
this line's percode coef don't be calculated and updated.
Default values: 7 | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.18 |
| hwVectoringLimitProfLineSpectrumProf The value of this object identifies the row in the XDSL Line Spectrum Configuration Profile Table,
(hwVOPLineSpectrumConfProfTable) that applies to vectoring link when the line is… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.19 |
| hwVectoringLegacyCpeActivatePolicy Vectoring legacy cpe activate policy.
Default values:limit.
Options:
1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode
2. block(2… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.2 |
| hwVectoringLimitProfUpboProf The value of this object identifies the row in the XDSL Upbo Configuration Profile Table,
(hwVOPUPBOConfProfTable) that applies to vectoring link when the line is activated in non… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.20 |
| hwVectoringVpMode The value of this object identifies the vector vp-mode.
Default values:mode384.
Options:
1. mode192(1) - The 192 mode of vectoring board
2. mode384(2) - The 384 mode of vectorin… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.21 |
| hwVectoringLongLoopDectionConfig Enable/Disable the long loop detection.
This parameter must be used together with hwVectoringLongLoopPolicy when it is enabled.
Default values:disable.
Options:
1. disable(0) - D… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.22 |
| hwVectoringLongLoopPolicy The value of this object identifies the long loop policy.
This parameter must be used together with hwVectoringLongLoopDectionConfig.
This parameter is configurable only when hwVe… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.24 |
| hwVectoringSingleWireInterruptionAutoShaping Enable/Disable the global vectoring Single Wire Interruption Auto Shaping.
This parameter must be used together with hwVectoringSingleWireInterruptionDetectionConfig.
This paramet… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.25 |
| hwVectoringGfastStartTone It is the global start tone for G.fast lines. In a G.fast and
VDSL hybrid scenario, you can configure this parameter to set
the start tone of the frequency band used by G.fast l… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.171.1.26 |
| hwVectoringFextCoefConfig The value of this object identifies whether the premium vectoring processing is enabled.
Default values : normal.
Options:
1. normal(1) - The premium vectoring processing i… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.27 |
| hwVectoringCpeWhiteListConfig Enable/Disable the global vectoring cpe white list configuration.
Default values: disable.
Options:
1. enable(1) - Enable the global vectoring cpe white list configuration.
2. … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.28 |
| hwVectoringCpeWhiteList This object defines the global vectoring cpe white list.
This is a string of 4 bytes of values indicates the type of vectoring cpe.
Default values: BDCMTRID.
the default value ca… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.29 |
| hwVectoringBandplanType Vectoring global frequency plan types.
Default values:bandplan998ade.
Options:
1. bandplanAnnexa(1) - The frequency plan types for the vectoring feature is Annex A
2. ba… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.3 |
| hwVectoringVpBoardMode The value of this object identifies the vector vp-board-mode.
Default values:fast.
Options:
1. fast(1) - The G.fast mode of vectoring board
2. vdsl(2) - The vdsl mode of vec… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.30 |
| hwVectoringUs0Type Vectoring us0 type.
Default values:us0TypeA.
Options:
1. us0TypeA(1) - US0 type is US0-type A
2. us0TypeB(2) - US0 type is US0-type B
3. us0TypeM(3) - US0 type is U… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.4 |
| hwVectoringAnnexALimitMask AnnexA limit mask.
Options:
1. d32(1) - AnnexA limit mask is D-32
2. d48(2) - AnnexA limit mask is D-48
3. d64(3) - AnnexA limit mask is D-64
4. d128(4)… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.171.1.5 |
| hwVectoringLegacyCpeReservedBand This object is used to set the reserved band of a legacy CPE.
The PSD on the frequency band is not shaped and the frequency band can carry traffic.
This object takes effect when h… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.6 |
| hwVectoringLegacyCpeToneBlackoutBand This object is used to set the blackout band of a legacy CPE.
The blackout frequency band is disabled and cannot carry traffic.
This object takes effect when hwVectoringLegacyCpeA… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.7 |
| hwVectoringLimitProfDsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activat… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.8 |
| hwVectoringLimitProfUsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table,
(hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activat… | scalar | OctetString | .1.3.6.1.4.1.2011.6.171.1.9 |