hwFailCause

HUAWEI-SPC-MIB · .1.3.6.1.4.1.2011.6.15.1.1.1.18
MIB view Table view

Object

column Enumeration 
Fault reason of SPC.
Options:
1. startBusy(1) -the start port is busy
2. endBusy(2) - the end port is busy
3. startFault(3) - the start	port is	fault
4. endFault(4) - the end port is fault
5. startLoop(5) - the start port is looped
6. endLoop(6) - the end port is looped
7. startLock(7) - the start	port is	locked
8. endLock(8) - the end port is locked
9. resNotEnough(9) -the system resource is not enough
10. waitingTimeout(10) -the waiting timer times out
11. startTest(11) -the start port is testing
12. endTest(12) -the end port is testing
13. noAlarm(13) -no alarm
14. noTS(14) -no TS
15. noLicense(15) -no license
16. linksetFault(16) -link set fault
17. portUnactive(17) -port unactive

Context

MIB
HUAWEI-SPC-MIB
OID
.1.3.6.1.4.1.2011.6.15.1.1.1.18
Type
column
Access
readonly
Status
current
Parent
hwSpcMngtEntry
Table
hwSpcMngtTable
Siblings
66

Syntax

Enumeration

Values & Constraints

Enumerated Values
1startBusy
2endBusy
3startFault
4endFault
5startLoop
6endLoop
7startLock
8endLock
9resNotEnough
10waitingTimeout
11startTest
12endTest
13noAlarm
14noTS
15noLicense
16linksetFault
17portUnactive

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwSpcNo
Index of the SPC Range: 0-2047 for MD products and 0-511 for MA products
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.1
hwChannelNum
Total channels occupied by the SPC.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.10
hwApptype
Applied type of SPC. Options: 1. normal(1) -normal application 2. hotline(2) -hotline application 3. mChannelTransparent(3) -M channel transparent 4. pBX-extention(4) -Z interface…
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.11
hwSpctype
Configuration type of SPC. Options: 1. anSpc(1) -Internal SPC 2. v5Spc(2) -V5 SPC 3. v5Preconnect(3) -V5 pre-connection SPC 4. private(4) -leased line SPC 5. ipspc(5) -IP SPC 6. c…
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.12
hwStartPortSubType
Sub type of SPC's start port. If the SPC is used for PHS, the type must be set to mnt or mlt. Options: 1. noSubType(255) -no sub type 2. mnt(1) -mnt 3. mlt(2) -mlt
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.13
hwEndPortSubType
Sub type of SPC's end port. This node is not used on the OLT. Options: 1. noSubType(255) -no sub type 2. mnt(1) -mnt 3. mlt(2) -mlt
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.14
hwPathProtect
Enable path protection. This leaf is not used on the OLT. Options: 1. yes(1) -YES 2. no(2) -NO
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.15
hwSPCName
Name of SPC. It contains 31 characters. - means it is not configured.
columnOctetString.1.3.6.1.4.1.2011.6.15.1.1.1.16
hwSpcState
SPC state. Options: 1. idle(1) -idle 2. normal(2) -normal 3. error(3) -error 4. errorChecking(4) -error checking 5. occupying(5) -occupying 6. checking(6) -checking 7. released(7)…
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.17
hwOprType
Operate type of SPC. It can be set to disconnect or connect. Options: 1. noOperation(1) -no operation 2. connect(2) -connect 3. disconnect(3) -disconnect
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.19
hwStartFrameID
Frame ID of SPC's start point. It must have been described in HUAWEI-DIVICE-MIB.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.2
hwRowStatus
Row status. It supports only CreateAndGo(4) and Destroy(6).
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.15.1.1.1.20
hwStartCESFrame
Start CES shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.21
hwStartCESSlot
CES slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.22
hwStartCESPort
Start CES port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.23
hwStartUpPv8Frame
Start upstream PV8 shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.24
hwStartUpPv8Slot
Start upstream PV8 slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.25
hwStartUpPv8Port
Start upstream PV8 port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.26
hwStartDownPv8Frame
Start downstream PV8 shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.27
hwStartDownPv8Slot
Start downstream PV8 slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.28
hwStartDownPv8Port
Start downstream PV8 port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.29
hwStartSlotID
Slot ID of SPC's start point. It must have been described in HUAWEI-DIVICE-MIB.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.3
hwStartRspFrame
Start downstream RSP shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.30
hwStartRspSlot
Start downstream RSP slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.31
hwStartRspPort
Start downstream RSP port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.32
hwEndtCESFrame
End downstream CES shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.33
hwEndCESSlot
End downstream CES slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.34
hwEndCESPort
End CES port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.35
hwEndUpPv8Frame
End upstream PV8 shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.36
hwEndUpPv8Slot
End upstream PV8 slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.37
hwEndUpPv8Port
End upstream PV8 port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.38
hwEndDownPv8Frame
End downstream PV8 shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.39
hwStartPort
Port ID of SPC's start point. It must have been described in HUAWEI-DIVICE-MIB.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.4
hwEndDownPv8Slot
End downstream PV8 slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.40
hwEndDownPv8Port
End downstream PV8 port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.41
hwEndRspFrame
End RSP shelf. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.42
hwEndRspSlot
End RSP slot. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.43
hwEndRspPort
End RSP port. If the value is 255, it indicates that the SPC does not use this path. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.44
hwIpSpcAttributeLocalIPAddr
Local IP address of the SPC. If the SPC's type is IPSPC, the local IP address must be configured.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.15.1.1.1.45
hwIpSpcAttributeLocalPort
Local UDP port of the SPC. If the SPC's type is IPSPC, the local UDP port must be configured.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.46
hwIpSpcAttributeRemoteIPAddr
Remote IP address of the SPC. If the SPC's type is IPSPC, the remote IP address mustd be configured.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.15.1.1.1.47
hwIpSpcAttributeRemotePort
Remote UDP port of the SPC. If the SPC's type is IPSPC, the remote UDP port must be configured.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.48
hwIpSpcAttributeVoiceCode
Voice codec type of the SPC. Options: 1. acG711Malaw(1) -G.711A 2. acG711Mulaw(2) -G.711U 3. acG723Low(3) -G.723low 4. acG723High(4) -G.723high 5. acG729(5) -G.729 6. …
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.49
hwStartBsn
Channel index of SPC's start point
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.5
hwIpSpcAttributeEce
The switch of EC. Options: 1. disable(1) -disable EC 2. enable(2) -enable EC 3. invalid(-1) -invalid value
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.50
hwIpSpcAttributeSce
The switch of SC. Options: 1. disable(1) -disable SC 2. enable(2) -enable SC 3. invalid(-1) -invalid value
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.51
hwIpSpcAttributeRtpInterval
RTP sampling time. Options: 1. five(1) -5 ms 2. ten(2) -10 ms 3. twenty(3) -20 ms 4. thirty(4) -30 ms 5. invalid(255) -invalid value Unit: millisecond
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.52
hwIpSpcAttributePlc
The switch of PLC. Options: 1. enable(1) -enable PLC 2. disable(2) -disable PLC 3. invalid(255) -invalid value
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.53
hwIpSpcAttributeRfc2198
The switch of 2198. Options: 1. enable(1) -enable RFC2198 redundancy 2. disable(2) -disable RFC2198 redundancy 3. invalid(255) -invalid value
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.54
hwIpSpcAttributeJbMode
Jitterbuffer mode. Options: 1. adapt(1) -adapt 2. fixed(2) -fixed 3. invalid(255) -invalid value
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.55
hwIpSpcAttributeWorkMode
DSP work mode. Options: 1. voice(1) -voice 2. fax(2) -fax 3. modem(3) -modem 4. invalid(255) -invalid value
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.56
hwIpSpcAttributeStreamMode
Connect mode. Options: 1. sendReceive(1) -send and receive 2. sendOnly(2) -send only 3. receiveOnly(3) -receive only 4. invalid(255) -invalid value
columnEnumeration.1.3.6.1.4.1.2011.6.15.1.1.1.57
hwRemotePortStepNum
The remote-port step. If the value is 65535, the ANSPC does not use the remote port step number attribute.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.58
hwLinksetNo
IUA link set number. In the case of the U interface transparent, this parameter must be configured. If the value is -1, it indicates that the SPC does not use the IUA link set num…
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.59
hwEndFrameID
Shelf ID of ANSPC's end point. It must have been described in HUAWEI-DIVICE-MIB. The value 255 indicates that this parameter is not used.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.6
hwInterfaceID
IUA interface ID. In the case of the U interface transparent, this parameter must be configured. If the value is -1, it indicates that the SPC does not use the IUA interface ID.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.60
hwConfGroup
Conference Group ID. This leaf is not used on the OLT.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.61
hwB1DspInfo
Information of B1 DSP in conference service or BRA IP service. It contains 32 characters and it is in the format of FrameID/SlotID/CardID/ChipID/CHNID. This leaf is not used on th…
columnOctetString.1.3.6.1.4.1.2011.6.15.1.1.1.62
hwB2DspInfo
Information of B2 DSP in BRA ip service. It contains 32 characters and it is in the format of FrameID/SlotID/CardID/ChipID/CHNID This leaf is not used on OLT.
columnOctetString.1.3.6.1.4.1.2011.6.15.1.1.1.63
hwSignalType
Signal type of IP SPC. Options: 1. 1 - normal 2. 2 - 2833 This leaf is only used on the UA5000.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.64
hwSpcInitialRingType
IP SPC initial ring type. Enumeration type: 1-Null, 2-Normal ring (FSK) 1:4, 3-Special ring (FSK) 1:2, 4-Special ring (FSK) 0.4:0.2:0.4:4, 5-Special ring (FSK) 1.2:2, 6-HK ring (…
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.65
hwSpcCadenceRingType
IP SPC cadence ring type. Enumerated types: 1-Null, 2-Normal ring 1:4, 3-Special ring 1:2, 4-Special ring 0.4:0.2:0.4:4, 5-Long ring, 6-Special ring 1.2:2, 7-HK ring 1:3, 8-HK CN…
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.66
hwSpc2833Payload
IP SPC 2833 payload type. This leaf is only used on the UA5000.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.67
hwEndSlotID
Slot ID of ANSPC's end point. It must have been described in HUAWEI-DIVICE-MIB. The value 255 indicates that this parameter is not used.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.7
hwEndPort
Port ID of ANSPC's end point. It must have been described in HUAWEI-DIVICE-MIB. The value 255 indicates that this parameter is not used.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.8
hwEndBsn
Channel index of SPC's end point. The value 255 indicates that this parameter is not used.
columnInteger32.1.3.6.1.4.1.2011.6.15.1.1.1.9