hwIPSecTunnelStatusChange
HUAWEI-SECURITY-IPSEC-MIB ·
.1.3.6.1.4.1.2011.6.122.26.6.19
Object
notification
Send the message when the IPSec tunnel is established or deleted.
Context
- MIB
- HUAWEI-SECURITY-IPSEC-MIB
- OID
.1.3.6.1.4.1.2011.6.122.26.6.19- Type
- notification
- Status
- current
- Parent
- hwIPSecNotifications
- Siblings
- 18
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIPSecTunnelStart Send the message when the IPSec tunnel is established. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.1 |
| hwIPSecTunnelReachMaxAtOnce Send the message when IPSec Tunnel Number Reach Max At Once. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.10 |
| hwIKEPeerReachMax Send the message when IKE Peer Number will Be Reach Max. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.11 |
| hwIKEPeerReachMaxAtOnce Send the message when IKE Peer Number Reach Max At Once. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.12 |
| hwIKESaPhase1Establish Send the message when IKE SA phase1 establish . | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.13 |
| hwIPSecNegoFail Send the message when IPSec tunnel negotiation fails. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.14 |
| hwIPSecTunnelHaveReachMax Send the message when IPSec Tunnel Number Has Been Reached Max . | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.15 |
| hwIPSecOPRRouteMissed Send the message when opr route inject failed. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.16 |
| hwIPSecLowSecurityLevel The security level of pkcs1 is low. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.17 |
| hwIPSecWeakEncr The ipsec sa encryption-algorithm is not GCM mode. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.18 |
| hwIPSecTunnelStop Send the message when the IPSec tunnel is deleted. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.2 |
| hwIPSecPolicyAdd Send the message when an IPSec policy is added. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.3 |
| hwIPSecPolicyDel Send the message when an IPSec policy is deleted. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.4 |
| hwIPSecPolicyAttach Send the message when an IPSec policy is applied to an interface. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.5 |
| hwIPSecPolicyDetach Send the message when an IPSec policy is cancelled on an interface. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.6 |
| hwIPSecIKEReset Send the message when an IKE SA is reset. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.7 |
| hwIPSecIPSecReset Send the message when an IPSec SA is reset. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.8 |
| hwIPSecTunnelReachMax Send the message when IPSec Tunnel Number will Be Reach Max. | notification | - | .1.3.6.1.4.1.2011.6.122.26.6.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIPSecVsysName Virtual system name. The value Public indicates the public system. For products that do not support virtual systems, the value is fixed to Public. | scalar | OctetString | .1.3.6.1.4.1.2011.6.122.26.5.13 |
| hwIPSecTrapIfName The interface name corresponding to the IPSec tunnel. | scalar | OctetString | .1.3.6.1.4.1.2011.6.122.26.5.14 |
| hwIPSecTunnelPolicyName Security policy for the IPSec tunnel. | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.27 |
| hwIPSecTunnelPolicyNum The tunnel number of IPSec policy. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.2 |
| hwIPSecTunnelPolicyAlias Security policy alias for the IPSec tunnel. | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.31 |
| hwIPSecTunnelVpnName Ipsec tunnel vpn name. | scalar | OctetString | .1.3.6.1.4.1.2011.6.122.26.5.19 |
| hwIPSecTunnelFlowVpnName Ipsec flow vpn name. | scalar | OctetString | .1.3.6.1.4.1.2011.6.122.26.5.20 |
| hwIPSecTrapTunnelDstIP Destination IP address of the tunnel (peer end). | scalar | OctetString | .1.3.6.1.4.1.2011.6.122.26.5.7 |
| hwIPSecTunnelDstPort Indicates the destination port number if NAT traversal is adopted. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.18 |
| hwIPSecTrapTunnelSrcIP Source IP address of the tunnel. | scalar | OctetString | .1.3.6.1.4.1.2011.6.122.26.5.8 |
| hwIPSecTunnelSrcPort Indicates the source port number if NAT traversal is adopted. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.17 |
| hwIPSecTunnelFlowInfo Data flow of the IPSec tunnel | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.30 |
| hwIPSecTunnelStatusChangeReason IPSec tunnel status change reason. | scalar | OctetString | .1.3.6.1.4.1.2011.6.122.26.5.22 |
| hwIPSecTunnelStatus Status of the Tunnel. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.5.21 |