HUAWEI-SECURITY-IPSEC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
87
.1.3.6.1.4.1.2011.6.122.26.2 · 1 row entry · 34 columns
This table specifies the configuration attributes for Huawei IPSec tunnel.
hwIPSecTunnelConfigEntry entry .1.3.6.1.4.1.2011.6.122.26.2.1
Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring configuration parameters associated with an instance of IPSec tunnel.
Indexes
hwIPSecIfIndex hwIPSecTunnelPolicyNum hwIPSecTunnelIndex
Column Syntax OID
hwIPSecIfIndex
Index of the router interface corresponding to the IPSec tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.1
hwIPSecTunnelPolicyNum
The tunnel number of IPSec policy.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.2
hwIPSecTunnelIndex
Index of the IPSec tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.3
hwIPSecTunnelRuleId
ID of the ACL rule in the current IPSec policy.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.4
hwIPSecTunnelDstIP
Destination IP address of the tunnel (peer end).
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.2.1.5
hwIPSecTunnelInsideIP
Intranet IP address of the peer end during remote access.
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.2.1.6
hwIPSecTunnelRemotePort
Port number of the peer end of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.7
hwIPSecTunnelCpuID
CPU ID of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.8
hwIPSecTunnelEncapMode
Encapsulation mode of the tunnel (tunneling mode or transmission mode).
Enumeration
Enumerated Values:
0tunnel
1transport
.1.3.6.1.4.1.2011.6.122.26.2.1.9
hwIPSecTunnelNatTraver
Whether the tunnel needs NAT traversal (If yes, the value is 1.).
Enumeration
Enumerated Values:
0noNatTraversal
1natTraversal
.1.3.6.1.4.1.2011.6.122.26.2.1.10
hwIPSecTunnelFromIKEV2
Whether the tunnel adopts IKEv2 (If yes, the value is 1.).
Enumeration
Enumerated Values:
0noIkev2
1ikev2
.1.3.6.1.4.1.2011.6.122.26.2.1.11
hwIPSecTunnelEncryptMode
Encryption mode of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.12
hwIPSecTunnelESPDigestMode
ESP check mode of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.13
hwIPSecTunnelAHDigestMode
AH check mode of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.14
hwIPSecTunnelProto
Protocol of the tunnel (ESP or AH, or both).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.15
hwIPSecTunnelOutPortIndex
Index of the egress of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.16
hwIPSecTunnelSrcPort
Indicates the source port number if NAT traversal is adopted.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.17
hwIPSecTunnelDstPort
Indicates the destination port number if NAT traversal is adopted.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.18
hwIPSecTunnelVrfIndex
VPN ID protected by the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.19
hwIPSecTunnelIfVrfIndex
VPN ID of the sending interface of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.20
hwIPSecTunnelSrcIP
Source IP address of the tunnel (local end).
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.2.1.21
hwIPSecTunnelSpeedLimitIn
Rate limiting pre-configured in the incoming direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.22
hwIPSecTunnelSpeedLimitOut
Rate limiting pre-configured in the outgoing direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.23
hwIPSecTunnelInitiator
Initiator or responder of the IPSec tunnel.
Enumeration
Enumerated Values:
0responder
1ikev2Initiator
2ikev1Initiator
.1.3.6.1.4.1.2011.6.122.26.2.1.24
hwIPSecTunnelLifeSize
Life cycle of the IPSec tunnel (in kbytes).
Unsigned32
Constraints:
range: 0-200000000
.1.3.6.1.4.1.2011.6.122.26.2.1.25
hwIPSecTunnelLifeTime
Life cycle of the IPSec tunnel (in seconds).
Unsigned32
Constraints:
range: 1-604800
.1.3.6.1.4.1.2011.6.122.26.2.1.26
hwIPSecTunnelPolicyName
Security policy for the IPSec tunnel.
OctetString
Constraints:
range: 1-255
.1.3.6.1.4.1.2011.6.122.26.2.1.27
hwIPSecTunnelSaStatus
Status of the SA.
Enumeration
Enumerated Values:
0free
1ocuppied
.1.3.6.1.4.1.2011.6.122.26.2.1.28
hwIPSecTunnelSlotID
SLOT ID of the tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.2.1.29
hwIPSecTunnelFlowInfo
Data flow of the IPSec tunnel
OctetString
Constraints:
range: 1-255
.1.3.6.1.4.1.2011.6.122.26.2.1.30
hwIPSecTunnelPolicyAlias
Security policy alias for the IPSec tunnel.
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.2.1.31
hwIPSecTunnelDstIPv6
Destination IPv6 address of the tunnel (peer end).
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.2.1.32
hwIPSecTunnelInsideIPv6
Intranet IPv6 address of the peer end during remote access.
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.2.1.33
hwIPSecTunnelSrcIPv6
Source IPv6 address of the tunnel (local end).
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.2.1.34
.1.3.6.1.4.1.2011.6.122.26.3 · 1 row entry · 31 columns
This table specifies the status attributes for Huawei IPSec tunnel.
hwIPSecTunnelStatsEntry entry .1.3.6.1.4.1.2011.6.122.26.3.1
Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring status parameters associated with an instance of IPSec tunnel.
Indexes
hwIPSecIfIndex hwIPSecTunnelPolicyNum hwIPSecTunnelIndex
Column Syntax OID
hwIPSecTunnelSaIDIn
Index of the incoming IPSec tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.1
hwIPSecTunnelSaIDOut
Index of the outgoing IPSec tunnel.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.2
hwIPSecTunnelFlowSoftExpireIn
Incoming soft timeout traffic (in bytes).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.3
hwIPSecTunnelFlowSoftExpireOut
Outgoing soft timeout traffic (in bytes).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.4
hwIPSecTunnelFlowHardExpireIn
Incoming hard timeout traffic (in bytes).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.5
hwIPSecTunnelFlowHardExpireOut
Outgoing hard timeout traffic (in bytes).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.6
hwIPSecTunnelRemainTime
Remaining time of the IPSec tunnel (in seconds).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.7
hwIPSecTunnelRemainSize
Remaining bytes of the IPSec tunnel (in kbytes).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.8
hwIPSecTunnelSpiIn
Incoming SPI.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.9
hwIPSecTunnelSpiOut
Outgoing SPI.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.10
hwIPSecTunnelInSideSpiIn
SPI of the internal ESP header when both AH and ESP are adopted in the incoming direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.11
hwIPSecTunnelInSideSpiOut
SPI of the internal ESP header when both AH and ESP are adopted in the outgoing direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.12
hwIPSecTunnelESPSequenceNumberIn
Serial number of the incoming ESP protocol.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.13
hwIPSecTunnelESPSequenceNumberOut
Serial number of the outgoing ESP protocol.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.14
hwIPSecTunnellAHSequenceNumberIn
Serial number of the incoming AH protocol.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.15
hwIPSecTunnellAHSequenceNumberOut
Serial number of the outgoing AH protocol.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.16
hwIPSecTunnelMemApplyFail
Number of discarded packets because packets to be encrypted are too long.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.3.1.17
hwIPSecTunnelBadAuth
Number of discarded packets caused by the authentication failure of received packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.3.1.18
hwIPSecTunnelReplay
Number of discarded packets caused by receiving replayed packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.3.1.19
hwIPSecTunnelAfterReCheckErr
Number of discarded packets caused by the decryption post-check failure.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.3.1.20
hwIPSecTunnelPktDropByteLimitIn
Number of discarded packets caused by the exceeding the byte limit in the incoming direction.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.3.1.21
hwIPSecTunnelPktDropByteLimitOut
Number of discarded packets caused by the exceeding of the byte limit in the outgoing direction.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.3.1.22
hwIPSecTunnelFIBSearchErr
Number of discarded packets caused by the route check failure.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.3.1.23
hwIPSecTunnelBytesPerSecondIn
Speed of inbound flow in bytes.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.24
hwIPSecTunnelBytesPerSecondOut
Speed of outbound flow in bytes.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.25
hwIPSecTunnelPacketsPerSecondIn
Speed of inbound flow in packets.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.26
hwIPSecTunnelPacketsPerSecondOut
Speed of outbound flow in packets.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.27
hwIPSecTunnelErrPacketsPerSecondIn
Speed of inbound error packets.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.28
hwIPSecTunnelErrPacketsPerSecondOut
Speed of outbound error packets.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.29
hwIPSecTunnelErrPacketsIn
Number of inbound error packets.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.30
hwIPSecTunnelErrPacketsOut
Number of outbound error packets.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.3.1.31
.1.3.6.1.4.1.2011.6.122.26.4 · 1 row entry · 11 columns
This table specifies the SA numbers of policies which have been bound with interfaces.
hwIPSecSaStatisticEntry entry .1.3.6.1.4.1.2011.6.122.26.4.1
.
Indexes
hwIPSecIfIndex hwIPSecTunnelPolicyNum
Column Syntax OID
hwIPSecSaStatisticTunnelPolicyName
Security policy for the IPSec tunnel.
OctetString
Constraints:
range: 1-255
.1.3.6.1.4.1.2011.6.122.26.4.1.1
hwIPSecSaStatisticSaInCnt
Incoming SA number.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.4.1.2
hwIPSecSaStatisticSaOutCnt
Outgoing SA number.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.4.1.3
hwIPSecTunnelByteInput
Num of bytes received by the IPSec Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.4.1.4
hwIPSecTunnelByteOutput
Num of bytes sent by the IPSec Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.4.1.5
hwIPSecTunnelPacketInput
Num of packets received by the IPSec Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.4.1.6
hwIPSecTunnelPacketOutput
Num of packets sent by the IPSec Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.4.1.7
hwIPSecTunnelDroppedPacketInput
Number of packets discarded by the IPSec tunnel in the inbound direction
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.4.1.8
hwIPSecTunnelDroppedPacketOutput
Number of packets discarded by the IPSec tunnel in the outbound direction
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.4.1.9
hwIPSecTunnelDialUserCount
IPSec tunnel remote access users
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.4.1.10
hwIPSecSaStatisticTunnelPolicyAlias
Security policy alias for the IPSec tunnel.
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.2011.6.122.26.4.1.11
.1.3.6.1.4.1.2011.6.122.26.8 · 1 row entry · 10 columns
This table specifies the status attributes for Huawei IPSec Gdoi.
hwIPSecGdoiStatsEntry entry .1.3.6.1.4.1.2011.6.122.26.8.1
Each entry in the hwIPSecGdoiStatsTable holds a set of monitoring status parameters associated with an instance of IPSec gdoi.
Indexes
hwIPSecGdoiGroupID hwIPSecGdoiRemoteAddress
Column Syntax OID
hwIPSecGdoiGroupID
ID of the GM group corresponding to the GM and KMC.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.122.26.8.1.1
hwIPSecGdoiRemoteAddress
IP Address where a GM points to.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.6.122.26.8.1.2
hwIPSecTunnelSendPacket
Statistic the number of the sent packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.3
hwIPSecTunnelSendSize
Statistic the total bytes of the sent packet.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.4
hwIPSecTunnelSendErrorPacket
Statistic the error number of the sent packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.5
hwIPSecTunnelSendErrorSize
Statistic the total Error bytes of the sent packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.6
hwIPSecTunnelRecvPacket
Statistic the number of the recieved packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.7
hwIPSecTunnelRecvSize
Statistic the total bytes of the recieved packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.8
hwIPSecTunnelRecvErrorPacket
Statistic the error number of the recieved packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.9
hwIPSecTunnelRecvErrorSize
Statistic the total error bytes of the recieved packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.122.26.8.1.10
.1.3.6.1.4.1.2011.6.122.26.9 · 1 row entry · 1 columns
This table specifies the status attributes for Huawei IPSec Gdoi TEK SA.
hwIPSecTEKSAStatusEntry entry .1.3.6.1.4.1.2011.6.122.26.9.1
Each entry in the hwIPSecTEKSAStatusEntry holds a set of monitoring status parameters associated with an instance of IPSec gdoi.
Indexes
hwIPSecGdoiGroupID hwIPSecGdoiRemoteAddress
Column Syntax OID
hwIPSecTEKSAStatus
Request for status of TEK-SA with the specified group-id and remote-address(If yes, the value is 0.).
Enumeration
Enumerated Values:
0teksa
1noteksa
.1.3.6.1.4.1.2011.6.122.26.9.1.1