hwIPSecTunnelPolicyNum
HUAWEI-SECURITY-IPSEC-MIB ·
.1.3.6.1.4.1.2011.6.122.26.2.1.2
Object
column
SNMPv2-SMIGauge32
The tunnel number of IPSec policy.
Context
- MIB
- HUAWEI-SECURITY-IPSEC-MIB
- OID
.1.3.6.1.4.1.2011.6.122.26.2.1.2- Type
- column
- Access
- notifyonly
- Status
- current
- Parent
- hwIPSecTunnelConfigEntry
- Table
- hwIPSecTunnelConfigTable
- Siblings
- 33
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIPSecIfIndex Index of the router interface corresponding to the IPSec tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.1 |
| hwIPSecTunnelNatTraver Whether the tunnel needs NAT traversal (If yes, the value is 1.). | column | Enumeration | .1.3.6.1.4.1.2011.6.122.26.2.1.10 |
| hwIPSecTunnelFromIKEV2 Whether the tunnel adopts IKEv2 (If yes, the value is 1.). | column | Enumeration | .1.3.6.1.4.1.2011.6.122.26.2.1.11 |
| hwIPSecTunnelEncryptMode Encryption mode of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.12 |
| hwIPSecTunnelESPDigestMode ESP check mode of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.13 |
| hwIPSecTunnelAHDigestMode AH check mode of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.14 |
| hwIPSecTunnelProto Protocol of the tunnel (ESP or AH, or both). | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.15 |
| hwIPSecTunnelOutPortIndex Index of the egress of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.16 |
| hwIPSecTunnelSrcPort Indicates the source port number if NAT traversal is adopted. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.17 |
| hwIPSecTunnelDstPort Indicates the destination port number if NAT traversal is adopted. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.18 |
| hwIPSecTunnelVrfIndex VPN ID protected by the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.19 |
| hwIPSecTunnelIfVrfIndex VPN ID of the sending interface of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.20 |
| hwIPSecTunnelSrcIP Source IP address of the tunnel (local end). | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.21 |
| hwIPSecTunnelSpeedLimitIn Rate limiting pre-configured in the incoming direction. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.22 |
| hwIPSecTunnelSpeedLimitOut Rate limiting pre-configured in the outgoing direction. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.23 |
| hwIPSecTunnelInitiator Initiator or responder of the IPSec tunnel. | column | Enumeration | .1.3.6.1.4.1.2011.6.122.26.2.1.24 |
| hwIPSecTunnelLifeSize Life cycle of the IPSec tunnel (in kbytes). | column | Unsigned32 | .1.3.6.1.4.1.2011.6.122.26.2.1.25 |
| hwIPSecTunnelLifeTime Life cycle of the IPSec tunnel (in seconds). | column | Unsigned32 | .1.3.6.1.4.1.2011.6.122.26.2.1.26 |
| hwIPSecTunnelPolicyName Security policy for the IPSec tunnel. | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.27 |
| hwIPSecTunnelSaStatus Status of the SA. | column | Enumeration | .1.3.6.1.4.1.2011.6.122.26.2.1.28 |
| hwIPSecTunnelSlotID SLOT ID of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.29 |
| hwIPSecTunnelIndex Index of the IPSec tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.3 |
| hwIPSecTunnelFlowInfo Data flow of the IPSec tunnel | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.30 |
| hwIPSecTunnelPolicyAlias Security policy alias for the IPSec tunnel. | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.31 |
| hwIPSecTunnelDstIPv6 Destination IPv6 address of the tunnel (peer end). | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.32 |
| hwIPSecTunnelInsideIPv6 Intranet IPv6 address of the peer end during remote access. | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.33 |
| hwIPSecTunnelSrcIPv6 Source IPv6 address of the tunnel (local end). | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.34 |
| hwIPSecTunnelRuleId ID of the ACL rule in the current IPSec policy. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.4 |
| hwIPSecTunnelDstIP Destination IP address of the tunnel (peer end). | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.5 |
| hwIPSecTunnelInsideIP Intranet IP address of the peer end during remote access. | column | OctetString | .1.3.6.1.4.1.2011.6.122.26.2.1.6 |
| hwIPSecTunnelRemotePort Port number of the peer end of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.7 |
| hwIPSecTunnelCpuID CPU ID of the tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.122.26.2.1.8 |
| hwIPSecTunnelEncapMode Encapsulation mode of the tunnel (tunneling mode or transmission mode). | column | Enumeration | .1.3.6.1.4.1.2011.6.122.26.2.1.9 |