hwOpticalAmplifierGainHigh
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.2.324
Object
notification
The gain of the optical module is too high.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.2.324- Type
- notification
- Status
- current
- Parent
- hwPortNotifications
- Siblings
- 300
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPortACRMasterPWChange CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a
pw is deleted or the pw status change. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.1 |
| hwLosAlarmResume This object indicates that a clear alarm is generated when signal loss at the receive end stops. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.10 |
| hwCposE1UpE1AisAlarmResume This object indicates that an upstream alarm indication signal generated on an E1 link channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.100 |
| hwCposE1DownE1AisAlarm This object indicates that a downstream alarm indication signal is generated on an E1 link channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.101 |
| hwCposE1DownE1AisAlarmResume This object indicates that the downstream alarm indication signal generated on an E1 link channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.102 |
| hwE1DownE1AisAlarm This object indicates that a downstream alarm indication signal is generated on an E1 interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.103 |
| hwE1DownE1AisAlarmResume This object indicates that the downstream alarm indication signal generated on an E1 interface is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.104 |
| hwLofAlarm This object indicates that an out of frame (OOF) alarm is generated at the receive end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.11 |
| hwCposE1LmfaAlarm This object indicates that an out of multiframe (OOM) alarm is generated on the framed E1 channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.111 |
| hwCposE1LmfaAlarmResume This object indicates that the OOM alarm generated on the framed E1 channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.112 |
| hwLaserShutAlarm This object indicates that an alarm is generated when the optical laser on a board is shut down. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.113 |
| hwLaserShutAlarmResume This object indicates that a clear alarm is generated when the optical laser on a board is opened. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.114 |
| hwLaserAutoShutAlarm This object indicates that an alarm is generated when the optical laser is shut down automatically. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.115 |
| hwLaserAutoShutAlarmResume This object indicates that the alarm for the automatic shutdown of the optical laser is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.116 |
| hwLoopbackAlarm This object indicates that an alarm is generated due to an interface loopback. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.117 |
| hwLoopbackAlarmResume This object indicates that the alarm for the interface loopback is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.118 |
| hwOcdAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.119 |
| hwLofAlarmResume This object indicates that a clear alarm is generated when frame loss at the receive end stops. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.12 |
| hwOcdAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.120 |
| hwLcdAlarm This object indicates an alarm for the loss of synchronization codes (SCs). | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.121 |
| hwLcdAlarmResume This object indicates that the alarm for the loss of synchronization codes (SCs) is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.122 |
| hwUhcsAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.123 |
| hwUhcsAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.124 |
| hwChcsAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.125 |
| hwChcsAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.126 |
| hwChannelLoopbackAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.127 |
| hwChannelLoopbackAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.128 |
| hwCesLopsAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.129 |
| hwOofAlarm This object indicates that an out of frame (OOF) alarm is generated at the receive end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.13 |
| hwCesLopsAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.130 |
| hwAtmPwLosPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.131 |
| hwAtmPwLosPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.132 |
| hwAtmPwMisorderPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.133 |
| hwAtmPwMisorderPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.134 |
| hwAtmPwUnknownCellExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.135 |
| hwAtmPwUnknownCellExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.136 |
| hwOofAlarmResume This object indicates that the OOF alarm generated at the receive end is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.14 |
| hwB1TcaAlarm This object indicates that the number of error bits for the B1 RS exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.15 |
| hwInputErrorAlarm This object indicates that an alarm is generated when the number of input errors on an interface exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.153 |
| hwInputErrorAlarmResume This object indicates that a clear alarm is generated when the number of input errors on an interface falls below the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.154 |
| hwOutputErrorAlarm This object indicates that an alarm is generated when the number of output errors on an interface exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.155 |
| hwOutputErrorAlarmResume This object indicates that a clear alarm is generated when the number of output errors on an interface falls below the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.156 |
| hwPortAlarmTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.157 |
| hwB1TcaAlarmResume This object indicates that the number of error bits for the B1 RS falls below the specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.16 |
| hwLoopBackAutoClearNotice set port undo loopback while set loopback autoclear enable when time out. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.160 |
| hwChannelLoopBackAutoClearNotice set channel undo loopback while set loopback autoclear enable when time out. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.161 |
| hwHpJ1TiuAlarm This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.162 |
| hwHpJ1TiuAlarmResume This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.163 |
| hwPortAlarmInverseAutoRecover Port alarm inverse auto recover. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.164 |
| hwB1ExcAlarm This object indicates that an alarm is generated when the number of B1 errors exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.165 |
| hwB1ExcAlarmResume This object indicates that a clear alarm is generated when the number of B1 errors falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.166 |
| hwB3ExcAlarm This object indicates that an alarm is generated when the number of B3 errors exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.167 |
| hwB3ExcAlarmResume This object indicates that a clear alarm is generated when the number of B3 errors falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.168 |
| hwBip2ExcAlarm This object indicates that an alarm is generated when the number of BIP2 errors exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.169 |
| hwB2TcaAlarm This object indicates that the number of error bits for the B2 RS exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.17 |
| hwBip2ExcAlarmResume This object indicates that a clear alarm is generated when the number of BIP2 errors falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.170 |
| hwLicenseLimitAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.171 |
| hwLicenseLimitAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.172 |
| hwOpticalModuleIsNotAuthorized This object indicates that an alarm is generated when the inserted optical module is one not authenticated by Huawei. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.173 |
| hwOpticalModuleIsNotAuthorizedResume This object indicates that a clear alarm is generated when the non-Huawei-authenticated optical module is removed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.174 |
| hwLocalFaultAlarm This object indicates that an alarm is generated when the receive link from the remote device to the local device fails. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.175 |
| hwLocalFaultAlarmResume This object indicates that a clear alarm is generated when the receive link from the remote device to the local device recovers. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.176 |
| hwRemoteFaultAlarm This object indicates that an alarm is generated when the transmit link from the remote device to the local device fails. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.177 |
| hwRemoteFaultAlarmResume This object indicates that a clear alarm is generated when the transmit link from the remote device to the local device recovers. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.178 |
| hwCopperPolarityError This object indicates that an alarm is generated when a polarity error occurs on an electrical interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.179 |
| hwB2TcaAlarmResume This object indicates that the number of error bits for the B2 RS falls below the specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.18 |
| hwCopperPolarityErrorResume This object indicates that a clear alarm is generated when the polarity error on an electrical interface is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.180 |
| hwLotuaisAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.181 |
| hwLotuaisAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.182 |
| hwLotulomAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.183 |
| hwLotulomAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.184 |
| hwLotusdberAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.185 |
| hwLotusdberAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.186 |
| hwLotusfberAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.187 |
| hwLotusfberAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.188 |
| hwLoduaisAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.189 |
| hwJ0TimAlarm This object indicates that an alarm for trace identifier mismatch is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.19 |
| hwLoduaisAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.190 |
| hwLodulckAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.191 |
| hwLodulckAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.192 |
| hwLoduociAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.193 |
| hwLoduociAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.194 |
| hwLpmbdiAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.195 |
| hwLpmbdiAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.196 |
| hwLpmtimAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.197 |
| hwLpmtimAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.198 |
| hwLsmbdiAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.199 |
| hwDslImaGroupTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.2 |
| hwJ0TimAlarmResume This object indicates that the alarm for trace identifier mismatch is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.20 |
| hwLsmbdiAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.200 |
| hwLsmiaeAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.201 |
| hwLsmiaeAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.202 |
| hwLsmtimAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.203 |
| hwLsmtimAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.204 |
| hwNegotiationFailedAlarm Auto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies;
the local ability is not compatible with the pe… | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.205 |
| hwNegotiationFailedAlarmResume Auto-negotiation failure alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.206 |
| hwEthHalfDuplex The port works in the half-duplex mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.207 |
| hwEthFullDuplex The half-duplex mode alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.208 |
| hwPhysicalPortAutoDetectFail Interface auto adapter fail alarm notification. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.209 |
| hwLrdiAlarm This object indicates that a line remote defect indicator (LRDI) alarm is generated in the multiplex section (MS) at the remote end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.21 |
| hwPhysicalPortAutoDetectSuccess Interface auto adapter fail alarm resume notification. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.210 |
| hwNotSameBoardInTrunk Not same boards in Eth-trunk. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.211 |
| hwOtnAlarm | node | - | .1.3.6.1.4.1.2011.5.25.157.2.212 |
| hwE3UpE3AisAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.213 |
| hwE3UpE3AisAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.214 |
| hwE3AlmE3RaiAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.215 |
| hwE3AlmE3RaiAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.216 |
| hwMultiServiceOnOneCardAlarm Multiple services be configured on the same subcard. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.217 |
| hwMultiServiceOnOneCardAlarmResume There is no multiple services on the same subcard. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.218 |
| hwInputRateChangeOverThresholdNotice The input rate change ratio exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.219 |
| hwLrdiAlarmResume This object indicates that the LRDI alarm generated in the MS at the remote end is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.22 |
| hwOutputRateChangeOverThresholdNotice The output rate change ratio exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.220 |
| hwNarrowBandTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.221 |
| hwLinkHeartbeatDropAlarm Link-heartbeat drop alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.222 |
| hwLinkHeartbeatDropAlarmResume Link-heartbeat drop alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.223 |
| hwLinkHeartbeatChangeAlarm Link-heartbeat change alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.224 |
| hwLinkHeartbeatChangeAlarmResume Link-heartbeat change alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.225 |
| hwPortPhysicalRateDegradeAlarm This object indicates that an alarm is generated when the negotiation rate on an electrical interface falls sharply. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.226 |
| hwPortPhysicalRateDegradeAlarmResume This object indicates that a clear alarm is generated when the negotiation rate on an electrical interface stops falling sharply. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.227 |
| hwLicenseInactiveAlarm The interface license was not activated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.228 |
| hwLicenseInactiveAlarmResume The interface license inactivation alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.229 |
| hwSfbereAlarm This object indicates that the number of error bits for the B2 RS exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.23 |
| hwLicenseResourceLackAlarm Interfaces of this type in use exceeded the maximum number. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.230 |
| hwLicenseResourceLackAlarmResume The maximum number-crossing alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.231 |
| hwPortModeChangeTrap This object indicates that the port rate type is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.232 |
| hwRdiAlarm The peer end was faulty. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.233 |
| hwRdiAlarmResume The peer end recovered from faults. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.234 |
| hwAisAlarm Upstream signals were abnormal. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.235 |
| hwAisAlarmResume Upstream signals recovered. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.236 |
| hwCollisionAlarm The link encountered a collision. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.237 |
| hwCollisionAlarmResume The link recovered from a collision. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.238 |
| hwSubIfNumExceededSpecAlarm The nunber of sub interface exceeded spec alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.239 |
| hwSfbereAlarmResume This object indicates that the number of error bits for the B2 RS falls below the specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.24 |
| hwSubIfNumExceededSpecAlarmResume The number of sub interface exceeded spec alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.240 |
| hwPortSpeedChangeTrap The speed of port is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.241 |
| hwPortGroupTransModeDiff This group of interfaces do not work in the same transmission mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.242 |
| hwPortGroupTransModeDiffResume This group of interfaces work in the same transmission mode now. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.243 |
| hwImpedanceMismatch The configured interface impedance value did not match that of the cable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.244 |
| hwPicLcdAlarm Loss of code group synchronization alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.245 |
| hwPicLcdAlarmResume Loss of code group synchronization alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.246 |
| hwBoardNotSupportAssignTrunk The card does not support extensions of Eth-Trunk specifications. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.247 |
| hwPortProtectGroupUnavailable The port protection group is unavailable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.248 |
| hwPortProtectGroupAvailable The port protection group is available. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.249 |
| hwAuLopAlarm This object indicates the loss of the AU pointer. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.25 |
| hwPortProtectGroupDelete The port protection group was deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.250 |
| hwDelayOverConfig Real-time E2E Delay Exceeded the Configured Delay. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.251 |
| hwDelayOverConfigResume Alarm Indicating the Real-time E2E Delay Exceeded the Configured Delay Was Cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.252 |
| hwAcBlockAlarm AC interface blocking alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.253 |
| hwAcBlockAlarmResume AC interface blocking alarm clearing. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.254 |
| hwPortLicenseActFail This object indicates that the license for a physical interface fails to be activated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.255 |
| hwPortLicenseActSuccess This object indicates that the license for a physical interface is successfully activated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.256 |
| hwCableSnrAbnormal The network cable is of poor quality. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.257 |
| hwCableSnrNormal The network cable is of good quality. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.258 |
| hwCableSnrDetectNotSupport The network cable quality cannot be detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.259 |
| hwAuLopAlarmResume This object indicates that the alarm for the loss of the AU pointer is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.26 |
| hwFlexEPhyNumberMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.260 |
| hwFlexEPhyNumberMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.261 |
| hwFlexEPhyGroupMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.262 |
| hwFlexEPhyGroupMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.263 |
| hwFlexEClientIDMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.264 |
| hwFlexEClientIDMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.265 |
| hwFlexEBwReduceAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.266 |
| hwFlexEBwReduceAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.267 |
| hwFlexEPhyFcsSdAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.268 |
| hwFlexEPhyFcsSdAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.269 |
| hwLaisAlarm This object indicates the indication signal alarm in the MS. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.27 |
| hwFlexEPhyLocalFaultAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.270 |
| hwFlexEPhyLocalFaultAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.271 |
| hwFlexEPhyRemoteFaultAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.272 |
| hwFlexEPhyRemoteFaultAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.273 |
| hwFlexEBwMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.274 |
| hwFlexEBwMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.275 |
| hwFlexEPhyDelayOverAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.276 |
| hwFlexEPhyDelayOverAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.277 |
| hwFlexESubTimeSlotMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.278 |
| hwFlexESubTimeSlotMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.279 |
| hwLaisAlarmResume This object indicates that the indication signal alarm in the MS is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.28 |
| hwVxlanTrunkHashNotSupport The Eth-Trunk can not function normally as an outbound interface for vxlan packets when IP address-based load balancing is configured. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.280 |
| hwPvcNumAlarm PVC number exceeded the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.281 |
| hwPvcNumAlarmResume PVC number alarm resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.282 |
| hwEthoamClosePortAlarm The service interface is disabled by Ethernet OAM. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.283 |
| hwPortTypeChangeTrap The mode of combo port is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.284 |
| hwComboSwitchFail Combo switch fail alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.285 |
| hwComboSwitchFailResume Combo switch fail alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.286 |
| hwEthoamClosePortAlarmResume The service interface is undo disable by Ethernet OAM. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.287 |
| hwVSPortConfigFail Configurations failed to be delivered to VS interconnection interfaces. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.288 |
| hwVSPortConfigFailResume Configurations failed to be delivered to VS interconnection interfaces resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.289 |
| hwSdbereAlarm This object indicates the signal degrade in the B2 MS. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.29 |
| hwPortResourceDeadLine Port authorization grace period alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.290 |
| hwPortResourceDeadLineResume Port authorization grace period alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.291 |
| hwPortLRMStateAbnormal Optical module of this interface does not match with LRM mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.292 |
| hwTrunkUUHashRisk Unknown unicast hash risk if an inter-board Eth-Trunk exists. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.293 |
| hwEthRxFlowFallAlarm Traffic fall alarm in the receive direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.294 |
| hwEthRxFlowFallAlarmResume Traffic fall clear alarm in the receive direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.295 |
| hwEthTxFlowFallAlarm Traffic fall alarm in the transmit direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.296 |
| hwEthTxFlowFallAlarmResume Traffic fall clear alarm in the transmit direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.297 |
| hwDot3brAbnormalAlarm The 802.3br negotiation status is abnormal. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.298 |
| hwDot3brAbnormalAlarmResume The 802.3br negotiation status is restored to normal. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.299 |
| hwDslImaLinkTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.3 |
| hwSdbereAlarmResume This object indicates that the alarm for the signal degrade in the B2 MS is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.30 |
| hwInputDiscardNotice Indicates that the interface input discard exceed the trap threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.300 |
| hwOutputDiscardNotice Indicates that the interface output discard exceed the trap threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.301 |
| hwFlowControlDeadLockAlarm The flowcontrol deadlock alarm has occurred. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.303 |
| hwFlowControlDeadLockAlarmResume The flowcontrol deadlock alarm has resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.304 |
| hwTunnelIfNumExceededSpecAlarm The number of Tunnel interfaces exceeds the limit. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.305 |
| hwFlexEGrpFecModeMismatch The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.306 |
| hwFlexEGrpFecModeMismatchResume The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.307 |
| hwIfmPortBurstAlarm This object indicates that a alarm is generated at the port burst. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.308 |
| hwPhysicalModeInconsistentAlarm Port physical work mode inconsistent alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.309 |
| hwPtimAlarm This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.31 |
| hwPhysicalModeInconsistentAlarmResume Port physical work mode inconsistent alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.310 |
| hwFlexECalendarMismatch Alarm of mismatch between the actually received and expected client calendars on the FlexE Group. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.311 |
| hwFlexECalendarMismatchResume The alarm of mismatch between the actually received and expected client calendars on the FlexE Group is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.312 |
| hwFlexETimeSlotMismatch Timeslot of the butted FlexE interface is mismatch. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.313 |
| hwFlexETimeSlotMismatchResume Timeslot of the butted FlexE interface is mismatch resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.314 |
| hwFlexEGrpNegotiationFail FlexE group negotiation fail alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.315 |
| hwFlexEGrpNegotiationFailResume FlexE group negotiation fail alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.316 |
| hwFlexEGrpSpeedModeMismatch The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.317 |
| hwFlexEGrpSpeedModeMismatchResume The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.318 |
| hwPortSfpNotSupportSingleFiber Optical modules do not support single-fiber optical modules. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.319 |
| hwPtimAlarmResume This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.32 |
| hwE1CasAlarm This object indicates that the number of errored seconds exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.320 |
| hwE1CasAlarmResume This object indicates that the number of errored seconds falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.321 |
| hwFlexEGrpPaddingMismatch The padding status of different PHYs in the FlexE group is inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.322 |
| hwFlexEGrpPaddingMismatchResume The padding status of different PHYs in the FlexE group is inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.323 |
| hwOpticalAmplifierGainHighResume The gain of the optical module too high has resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.325 |
| hwOpticalAmplifierGainLow The gain of the optical module is too low. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.326 |
| hwOpticalAmplifierGainLowResume The gain of the optical module too low has resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.327 |
| hwPortSfpWorkOnlyNonNego When an SFP module is installed, the port can work only at 1000 Mbit/s in non-auto-negotiation mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.328 |
| hwPortGroupModeInvalid The rate and PLL of the ports in the group do not match. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.329 |
| hwPuneqAlarm This object indicates that an alarm is generated when the higher order path (HP) is unequipped. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.33 |
| hwPortGroupModeInvalidResume The rate and PLL of the ports in the group match now. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.330 |
| hwPortErrPktSpeedDownGrade The number of error packets exceeds the threshold, triggering automatic rate reduction on the interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.331 |
| hwPortErrPktSpeedDownGradeResume The number of error packets is lower than the threshold and the interface rate is automatically recovered. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.332 |
| hwPuneqAlarmResume This object indicates that a clear alarm is generated when the higher order path (HP) is equipped. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.34 |
| hwPrdiAlarm This object indicates the higher order path (HP) Remote Default Indication (HPRDI) alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.35 |
| hwPrdiAlarmResume This object indicates that the HPRDI alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.36 |
| hwB3TcaAlarm This object indicates that the number of bit errors on the B3 higher order path (HP) exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.37 |
| hwB3TcaAlarmResume This object indicates that the number of bit errors on the B3 higher order path (HP) falls below the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.38 |
| hwPplmAlarm This object indicates the higher order path (HP) signal identifier mismatch. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.39 |
| hwDslLinkTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.4 |
| hwPplmAlarmResume This object indicates that the higher order path (HP) signal identifier mismatch is rectified. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.40 |
| hwPaisAlarm This object indicates that a path alarm indication signal is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.41 |
| hwPaisAlarmResume This object indicates that the path alarm indication signal is removed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.42 |
| hwAuAisAlarm This object indicates that a higher order path (HP) indication signal alarm is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.43 |
| hwAuAisAlarmResume This object indicates that the higher order path (HP) indication signal alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.44 |
| hwVlopAlarm This object indicates that an alarm is generated when the administrative unit (AU) pointer is lost. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.45 |
| hwVlopAlarmResume This object indicates that the alarm generated due to the loss of the AU pointer is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.46 |
| hwLomAlarm This object indicates the loss of multiframe (LOM) on the higher order path (HP). | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.47 |
| hwLomAlarmResume This object indicates that the LOM on the higher order path (HP) is resolved. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.48 |
| hwLpTimVc12Alarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.49 |
| hwCesPwRemoteLosPktAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.5 |
| hwLpTimVc12AlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.50 |
| hwLpUneqVc12Alarm This object indicates that a lower order path (LP) unequipped indication signal (PUNEQ) alarm is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.51 |
| hwLpUneqVc12AlarmResume This object indicates that the PUNEQ alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.52 |
| hwVrdiAlarm This object indicates that a lower order path (LP) remote defect indication (PRDI) alarm is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.53 |
| hwVrdiAlarmResume This object indicates that the PRDI alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.54 |
| hwBip2TcaAlarm This object indicates that an alarm is generated for the BIP signal degrade. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.57 |
| hwBip2TcaAlarmResume This object indicates that the alarm for the BIP signal degrade is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.58 |
| hwLpSlmVc12Alarm This object indicates a lower order path (LP) signal label mismatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.59 |
| hwCesPwRemoteLosPktAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.6 |
| hwLpSlmVc12AlarmResume This object indicates that the lower order path (LP) signal label mismatch alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.60 |
| hwTuAisVc12Alarm This object indicates TU alarm indication. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.61 |
| hwTuAisVc12AlarmResume This object indicates that the TU alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.62 |
| hwE1EstcaAlarm This object indicates that the number of errored seconds exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.63 |
| hwE1EstcaAlarmResume This object indicates that the number of errored seconds falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.64 |
| hwE1LmfaAlarm This object indicates an LOM alarm on the framed E1. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.67 |
| hwE1LmfaAlarmResume This object indicates that the LOM alarm on the framed E1 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.68 |
| hwE1UpE1AisAlarm This object indicates that an upstream alarm indication signal is generated on an E1 interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.69 |
| hwCesPwOppositeRai Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.7 |
| hwE1UpE1AisAlarmResume This object indicates that the upstream alarm indication signal generated on an E1 interface is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.70 |
| hwE1AlmE1RaiAlarm This object indicates that a remote alarm indication (RAI) signal is generated on an E1 link. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.71 |
| hwE1AlmE1RaiAlarmResume This object indicates that the RAI signal generated on an E1 link is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.72 |
| hwCesPwOppositeAcFault This object indicates that an alarm is generated when the attachment circuit on the peer device goes faulty. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.73 |
| hwCesPwOppositeAcFaultResume This object indicates that a clear alarm is generated when the attachment circuit fault on the peer device is rectified. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.74 |
| hwCesLosPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.75 |
| hwCesLosPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.76 |
| hwCesMisorderPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.77 |
| hwCesMisorderPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.78 |
| hwCesStrayPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.79 |
| hwCesPwOppositeRaiResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.8 |
| hwCesStrayPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.80 |
| hwCesMalPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.81 |
| hwCesMalPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.82 |
| hwCesJtrUdrExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.83 |
| hwCesJtrUdrExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.84 |
| hwCesJtrOvrExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.85 |
| hwCesJtrOvrExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.86 |
| hwRroolAlarm This object indicates that an alarm is generated when there is no clock on the receive line. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.87 |
| hwRroolAlarmResume This object indicates that a clear alarm is generated when there is a clock on the receive line. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.88 |
| hwVrfiAlarm This object indicates that an alarm is generated when a lower order path (LP) remote failure indication (RFI) signal is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.89 |
| hwLosAlarm This object indicates that an alarm is generated due to signal loss at the receive end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.9 |
| hwVrfiAlarmResume This object indicates that a clear alarm is generated when the lower order path (LP) remote failure indication (RFI) signal is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.90 |
| hwV5VcaisAlarm This object indicates that an alarm indication signal is generated in the virtual container. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.91 |
| hwV5VcaisAlarmResume This object indicates that the alarm indication signal generated in the virtual container is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.92 |
| hwCposE1AlmE1RaiAlarm This object indicates that an RAI signal is generated on an E1 link channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.95 |
| hwCposE1AlmE1RaiAlarmResume This object indicates that the RAI signal generated on an E1 link channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.96 |
| hwCposE1LfaAlarm This object indicates that an out of frame (OOF) alarm is generated on the framed E1 channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.97 |
| hwCposE1LfaAlarmResume This object indicates that the OOF alarm generated on the framed E1 channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.98 |
| hwCposE1UpE1AisAlarm This object indicates that an upstream alarm indication signal is generated on an E1 link channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPhysicalPortIfIndex This object indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 |
| hwPhysicalPortName Indicates the physical port name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 |