hwBoardNotSupportAssignTrunk
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.2.247
Object
notification
The card does not support extensions of Eth-Trunk specifications.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.2.247- Type
- notification
- Status
- current
- Parent
- hwPortNotifications
- Siblings
- 300
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPortACRMasterPWChange CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a
pw is deleted or the pw status change. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.1 |
| hwLosAlarmResume This object indicates that a clear alarm is generated when signal loss at the receive end stops. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.10 |
| hwCposE1UpE1AisAlarmResume This object indicates that an upstream alarm indication signal generated on an E1 link channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.100 |
| hwCposE1DownE1AisAlarm This object indicates that a downstream alarm indication signal is generated on an E1 link channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.101 |
| hwCposE1DownE1AisAlarmResume This object indicates that the downstream alarm indication signal generated on an E1 link channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.102 |
| hwE1DownE1AisAlarm This object indicates that a downstream alarm indication signal is generated on an E1 interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.103 |
| hwE1DownE1AisAlarmResume This object indicates that the downstream alarm indication signal generated on an E1 interface is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.104 |
| hwLofAlarm This object indicates that an out of frame (OOF) alarm is generated at the receive end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.11 |
| hwCposE1LmfaAlarm This object indicates that an out of multiframe (OOM) alarm is generated on the framed E1 channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.111 |
| hwCposE1LmfaAlarmResume This object indicates that the OOM alarm generated on the framed E1 channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.112 |
| hwLaserShutAlarm This object indicates that an alarm is generated when the optical laser on a board is shut down. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.113 |
| hwLaserShutAlarmResume This object indicates that a clear alarm is generated when the optical laser on a board is opened. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.114 |
| hwLaserAutoShutAlarm This object indicates that an alarm is generated when the optical laser is shut down automatically. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.115 |
| hwLaserAutoShutAlarmResume This object indicates that the alarm for the automatic shutdown of the optical laser is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.116 |
| hwLoopbackAlarm This object indicates that an alarm is generated due to an interface loopback. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.117 |
| hwLoopbackAlarmResume This object indicates that the alarm for the interface loopback is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.118 |
| hwOcdAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.119 |
| hwLofAlarmResume This object indicates that a clear alarm is generated when frame loss at the receive end stops. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.12 |
| hwOcdAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.120 |
| hwLcdAlarm This object indicates an alarm for the loss of synchronization codes (SCs). | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.121 |
| hwLcdAlarmResume This object indicates that the alarm for the loss of synchronization codes (SCs) is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.122 |
| hwUhcsAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.123 |
| hwUhcsAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.124 |
| hwChcsAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.125 |
| hwChcsAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.126 |
| hwChannelLoopbackAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.127 |
| hwChannelLoopbackAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.128 |
| hwCesLopsAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.129 |
| hwOofAlarm This object indicates that an out of frame (OOF) alarm is generated at the receive end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.13 |
| hwCesLopsAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.130 |
| hwAtmPwLosPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.131 |
| hwAtmPwLosPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.132 |
| hwAtmPwMisorderPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.133 |
| hwAtmPwMisorderPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.134 |
| hwAtmPwUnknownCellExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.135 |
| hwAtmPwUnknownCellExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.136 |
| hwOofAlarmResume This object indicates that the OOF alarm generated at the receive end is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.14 |
| hwB1TcaAlarm This object indicates that the number of error bits for the B1 RS exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.15 |
| hwInputErrorAlarm This object indicates that an alarm is generated when the number of input errors on an interface exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.153 |
| hwInputErrorAlarmResume This object indicates that a clear alarm is generated when the number of input errors on an interface falls below the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.154 |
| hwOutputErrorAlarm This object indicates that an alarm is generated when the number of output errors on an interface exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.155 |
| hwOutputErrorAlarmResume This object indicates that a clear alarm is generated when the number of output errors on an interface falls below the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.156 |
| hwPortAlarmTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.157 |
| hwB1TcaAlarmResume This object indicates that the number of error bits for the B1 RS falls below the specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.16 |
| hwLoopBackAutoClearNotice set port undo loopback while set loopback autoclear enable when time out. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.160 |
| hwChannelLoopBackAutoClearNotice set channel undo loopback while set loopback autoclear enable when time out. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.161 |
| hwHpJ1TiuAlarm This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.162 |
| hwHpJ1TiuAlarmResume This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.163 |
| hwPortAlarmInverseAutoRecover Port alarm inverse auto recover. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.164 |
| hwB1ExcAlarm This object indicates that an alarm is generated when the number of B1 errors exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.165 |
| hwB1ExcAlarmResume This object indicates that a clear alarm is generated when the number of B1 errors falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.166 |
| hwB3ExcAlarm This object indicates that an alarm is generated when the number of B3 errors exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.167 |
| hwB3ExcAlarmResume This object indicates that a clear alarm is generated when the number of B3 errors falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.168 |
| hwBip2ExcAlarm This object indicates that an alarm is generated when the number of BIP2 errors exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.169 |
| hwB2TcaAlarm This object indicates that the number of error bits for the B2 RS exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.17 |
| hwBip2ExcAlarmResume This object indicates that a clear alarm is generated when the number of BIP2 errors falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.170 |
| hwLicenseLimitAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.171 |
| hwLicenseLimitAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.172 |
| hwOpticalModuleIsNotAuthorized This object indicates that an alarm is generated when the inserted optical module is one not authenticated by Huawei. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.173 |
| hwOpticalModuleIsNotAuthorizedResume This object indicates that a clear alarm is generated when the non-Huawei-authenticated optical module is removed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.174 |
| hwLocalFaultAlarm This object indicates that an alarm is generated when the receive link from the remote device to the local device fails. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.175 |
| hwLocalFaultAlarmResume This object indicates that a clear alarm is generated when the receive link from the remote device to the local device recovers. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.176 |
| hwRemoteFaultAlarm This object indicates that an alarm is generated when the transmit link from the remote device to the local device fails. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.177 |
| hwRemoteFaultAlarmResume This object indicates that a clear alarm is generated when the transmit link from the remote device to the local device recovers. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.178 |
| hwCopperPolarityError This object indicates that an alarm is generated when a polarity error occurs on an electrical interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.179 |
| hwB2TcaAlarmResume This object indicates that the number of error bits for the B2 RS falls below the specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.18 |
| hwCopperPolarityErrorResume This object indicates that a clear alarm is generated when the polarity error on an electrical interface is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.180 |
| hwLotuaisAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.181 |
| hwLotuaisAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.182 |
| hwLotulomAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.183 |
| hwLotulomAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.184 |
| hwLotusdberAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.185 |
| hwLotusdberAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.186 |
| hwLotusfberAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.187 |
| hwLotusfberAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.188 |
| hwLoduaisAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.189 |
| hwJ0TimAlarm This object indicates that an alarm for trace identifier mismatch is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.19 |
| hwLoduaisAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.190 |
| hwLodulckAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.191 |
| hwLodulckAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.192 |
| hwLoduociAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.193 |
| hwLoduociAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.194 |
| hwLpmbdiAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.195 |
| hwLpmbdiAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.196 |
| hwLpmtimAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.197 |
| hwLpmtimAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.198 |
| hwLsmbdiAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.199 |
| hwDslImaGroupTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.2 |
| hwJ0TimAlarmResume This object indicates that the alarm for trace identifier mismatch is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.20 |
| hwLsmbdiAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.200 |
| hwLsmiaeAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.201 |
| hwLsmiaeAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.202 |
| hwLsmtimAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.203 |
| hwLsmtimAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.204 |
| hwNegotiationFailedAlarm Auto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies;
the local ability is not compatible with the pe… | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.205 |
| hwNegotiationFailedAlarmResume Auto-negotiation failure alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.206 |
| hwEthHalfDuplex The port works in the half-duplex mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.207 |
| hwEthFullDuplex The half-duplex mode alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.208 |
| hwPhysicalPortAutoDetectFail Interface auto adapter fail alarm notification. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.209 |
| hwLrdiAlarm This object indicates that a line remote defect indicator (LRDI) alarm is generated in the multiplex section (MS) at the remote end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.21 |
| hwPhysicalPortAutoDetectSuccess Interface auto adapter fail alarm resume notification. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.210 |
| hwNotSameBoardInTrunk Not same boards in Eth-trunk. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.211 |
| hwOtnAlarm | node | - | .1.3.6.1.4.1.2011.5.25.157.2.212 |
| hwE3UpE3AisAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.213 |
| hwE3UpE3AisAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.214 |
| hwE3AlmE3RaiAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.215 |
| hwE3AlmE3RaiAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.216 |
| hwMultiServiceOnOneCardAlarm Multiple services be configured on the same subcard. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.217 |
| hwMultiServiceOnOneCardAlarmResume There is no multiple services on the same subcard. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.218 |
| hwInputRateChangeOverThresholdNotice The input rate change ratio exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.219 |
| hwLrdiAlarmResume This object indicates that the LRDI alarm generated in the MS at the remote end is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.22 |
| hwOutputRateChangeOverThresholdNotice The output rate change ratio exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.220 |
| hwNarrowBandTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.221 |
| hwLinkHeartbeatDropAlarm Link-heartbeat drop alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.222 |
| hwLinkHeartbeatDropAlarmResume Link-heartbeat drop alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.223 |
| hwLinkHeartbeatChangeAlarm Link-heartbeat change alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.224 |
| hwLinkHeartbeatChangeAlarmResume Link-heartbeat change alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.225 |
| hwPortPhysicalRateDegradeAlarm This object indicates that an alarm is generated when the negotiation rate on an electrical interface falls sharply. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.226 |
| hwPortPhysicalRateDegradeAlarmResume This object indicates that a clear alarm is generated when the negotiation rate on an electrical interface stops falling sharply. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.227 |
| hwLicenseInactiveAlarm The interface license was not activated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.228 |
| hwLicenseInactiveAlarmResume The interface license inactivation alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.229 |
| hwSfbereAlarm This object indicates that the number of error bits for the B2 RS exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.23 |
| hwLicenseResourceLackAlarm Interfaces of this type in use exceeded the maximum number. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.230 |
| hwLicenseResourceLackAlarmResume The maximum number-crossing alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.231 |
| hwPortModeChangeTrap This object indicates that the port rate type is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.232 |
| hwRdiAlarm The peer end was faulty. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.233 |
| hwRdiAlarmResume The peer end recovered from faults. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.234 |
| hwAisAlarm Upstream signals were abnormal. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.235 |
| hwAisAlarmResume Upstream signals recovered. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.236 |
| hwCollisionAlarm The link encountered a collision. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.237 |
| hwCollisionAlarmResume The link recovered from a collision. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.238 |
| hwSubIfNumExceededSpecAlarm The nunber of sub interface exceeded spec alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.239 |
| hwSfbereAlarmResume This object indicates that the number of error bits for the B2 RS falls below the specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.24 |
| hwSubIfNumExceededSpecAlarmResume The number of sub interface exceeded spec alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.240 |
| hwPortSpeedChangeTrap The speed of port is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.241 |
| hwPortGroupTransModeDiff This group of interfaces do not work in the same transmission mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.242 |
| hwPortGroupTransModeDiffResume This group of interfaces work in the same transmission mode now. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.243 |
| hwImpedanceMismatch The configured interface impedance value did not match that of the cable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.244 |
| hwPicLcdAlarm Loss of code group synchronization alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.245 |
| hwPicLcdAlarmResume Loss of code group synchronization alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.246 |
| hwPortProtectGroupUnavailable The port protection group is unavailable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.248 |
| hwPortProtectGroupAvailable The port protection group is available. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.249 |
| hwAuLopAlarm This object indicates the loss of the AU pointer. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.25 |
| hwPortProtectGroupDelete The port protection group was deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.250 |
| hwDelayOverConfig Real-time E2E Delay Exceeded the Configured Delay. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.251 |
| hwDelayOverConfigResume Alarm Indicating the Real-time E2E Delay Exceeded the Configured Delay Was Cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.252 |
| hwAcBlockAlarm AC interface blocking alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.253 |
| hwAcBlockAlarmResume AC interface blocking alarm clearing. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.254 |
| hwPortLicenseActFail This object indicates that the license for a physical interface fails to be activated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.255 |
| hwPortLicenseActSuccess This object indicates that the license for a physical interface is successfully activated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.256 |
| hwCableSnrAbnormal The network cable is of poor quality. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.257 |
| hwCableSnrNormal The network cable is of good quality. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.258 |
| hwCableSnrDetectNotSupport The network cable quality cannot be detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.259 |
| hwAuLopAlarmResume This object indicates that the alarm for the loss of the AU pointer is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.26 |
| hwFlexEPhyNumberMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.260 |
| hwFlexEPhyNumberMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.261 |
| hwFlexEPhyGroupMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.262 |
| hwFlexEPhyGroupMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.263 |
| hwFlexEClientIDMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.264 |
| hwFlexEClientIDMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.265 |
| hwFlexEBwReduceAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.266 |
| hwFlexEBwReduceAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.267 |
| hwFlexEPhyFcsSdAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.268 |
| hwFlexEPhyFcsSdAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.269 |
| hwLaisAlarm This object indicates the indication signal alarm in the MS. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.27 |
| hwFlexEPhyLocalFaultAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.270 |
| hwFlexEPhyLocalFaultAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.271 |
| hwFlexEPhyRemoteFaultAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.272 |
| hwFlexEPhyRemoteFaultAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.273 |
| hwFlexEBwMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.274 |
| hwFlexEBwMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.275 |
| hwFlexEPhyDelayOverAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.276 |
| hwFlexEPhyDelayOverAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.277 |
| hwFlexESubTimeSlotMismatch Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.278 |
| hwFlexESubTimeSlotMismatchResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.279 |
| hwLaisAlarmResume This object indicates that the indication signal alarm in the MS is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.28 |
| hwVxlanTrunkHashNotSupport The Eth-Trunk can not function normally as an outbound interface for vxlan packets when IP address-based load balancing is configured. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.280 |
| hwPvcNumAlarm PVC number exceeded the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.281 |
| hwPvcNumAlarmResume PVC number alarm resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.282 |
| hwEthoamClosePortAlarm The service interface is disabled by Ethernet OAM. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.283 |
| hwPortTypeChangeTrap The mode of combo port is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.284 |
| hwComboSwitchFail Combo switch fail alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.285 |
| hwComboSwitchFailResume Combo switch fail alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.286 |
| hwEthoamClosePortAlarmResume The service interface is undo disable by Ethernet OAM. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.287 |
| hwVSPortConfigFail Configurations failed to be delivered to VS interconnection interfaces. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.288 |
| hwVSPortConfigFailResume Configurations failed to be delivered to VS interconnection interfaces resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.289 |
| hwSdbereAlarm This object indicates the signal degrade in the B2 MS. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.29 |
| hwPortResourceDeadLine Port authorization grace period alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.290 |
| hwPortResourceDeadLineResume Port authorization grace period alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.291 |
| hwPortLRMStateAbnormal Optical module of this interface does not match with LRM mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.292 |
| hwTrunkUUHashRisk Unknown unicast hash risk if an inter-board Eth-Trunk exists. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.293 |
| hwEthRxFlowFallAlarm Traffic fall alarm in the receive direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.294 |
| hwEthRxFlowFallAlarmResume Traffic fall clear alarm in the receive direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.295 |
| hwEthTxFlowFallAlarm Traffic fall alarm in the transmit direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.296 |
| hwEthTxFlowFallAlarmResume Traffic fall clear alarm in the transmit direction of an Ethernet interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.297 |
| hwDot3brAbnormalAlarm The 802.3br negotiation status is abnormal. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.298 |
| hwDot3brAbnormalAlarmResume The 802.3br negotiation status is restored to normal. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.299 |
| hwDslImaLinkTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.3 |
| hwSdbereAlarmResume This object indicates that the alarm for the signal degrade in the B2 MS is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.30 |
| hwInputDiscardNotice Indicates that the interface input discard exceed the trap threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.300 |
| hwOutputDiscardNotice Indicates that the interface output discard exceed the trap threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.301 |
| hwFlowControlDeadLockAlarm The flowcontrol deadlock alarm has occurred. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.303 |
| hwFlowControlDeadLockAlarmResume The flowcontrol deadlock alarm has resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.304 |
| hwTunnelIfNumExceededSpecAlarm The number of Tunnel interfaces exceeds the limit. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.305 |
| hwFlexEGrpFecModeMismatch The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.306 |
| hwFlexEGrpFecModeMismatchResume The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.307 |
| hwIfmPortBurstAlarm This object indicates that a alarm is generated at the port burst. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.308 |
| hwPhysicalModeInconsistentAlarm Port physical work mode inconsistent alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.309 |
| hwPtimAlarm This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.31 |
| hwPhysicalModeInconsistentAlarmResume Port physical work mode inconsistent alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.310 |
| hwFlexECalendarMismatch Alarm of mismatch between the actually received and expected client calendars on the FlexE Group. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.311 |
| hwFlexECalendarMismatchResume The alarm of mismatch between the actually received and expected client calendars on the FlexE Group is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.312 |
| hwFlexETimeSlotMismatch Timeslot of the butted FlexE interface is mismatch. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.313 |
| hwFlexETimeSlotMismatchResume Timeslot of the butted FlexE interface is mismatch resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.314 |
| hwFlexEGrpNegotiationFail FlexE group negotiation fail alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.315 |
| hwFlexEGrpNegotiationFailResume FlexE group negotiation fail alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.316 |
| hwFlexEGrpSpeedModeMismatch The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.317 |
| hwFlexEGrpSpeedModeMismatchResume The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.318 |
| hwPortSfpNotSupportSingleFiber Optical modules do not support single-fiber optical modules. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.319 |
| hwPtimAlarmResume This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.32 |
| hwE1CasAlarm This object indicates that the number of errored seconds exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.320 |
| hwE1CasAlarmResume This object indicates that the number of errored seconds falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.321 |
| hwFlexEGrpPaddingMismatch The padding status of different PHYs in the FlexE group is inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.322 |
| hwFlexEGrpPaddingMismatchResume The padding status of different PHYs in the FlexE group is inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.323 |
| hwOpticalAmplifierGainHigh The gain of the optical module is too high. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.324 |
| hwOpticalAmplifierGainHighResume The gain of the optical module too high has resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.325 |
| hwOpticalAmplifierGainLow The gain of the optical module is too low. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.326 |
| hwOpticalAmplifierGainLowResume The gain of the optical module too low has resumed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.327 |
| hwPortSfpWorkOnlyNonNego When an SFP module is installed, the port can work only at 1000 Mbit/s in non-auto-negotiation mode. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.328 |
| hwPortGroupModeInvalid The rate and PLL of the ports in the group do not match. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.329 |
| hwPuneqAlarm This object indicates that an alarm is generated when the higher order path (HP) is unequipped. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.33 |
| hwPortGroupModeInvalidResume The rate and PLL of the ports in the group match now. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.330 |
| hwPortErrPktSpeedDownGrade The number of error packets exceeds the threshold, triggering automatic rate reduction on the interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.331 |
| hwPortErrPktSpeedDownGradeResume The number of error packets is lower than the threshold and the interface rate is automatically recovered. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.332 |
| hwPuneqAlarmResume This object indicates that a clear alarm is generated when the higher order path (HP) is equipped. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.34 |
| hwPrdiAlarm This object indicates the higher order path (HP) Remote Default Indication (HPRDI) alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.35 |
| hwPrdiAlarmResume This object indicates that the HPRDI alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.36 |
| hwB3TcaAlarm This object indicates that the number of bit errors on the B3 higher order path (HP) exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.37 |
| hwB3TcaAlarmResume This object indicates that the number of bit errors on the B3 higher order path (HP) falls below the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.38 |
| hwPplmAlarm This object indicates the higher order path (HP) signal identifier mismatch. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.39 |
| hwDslLinkTraps | node | - | .1.3.6.1.4.1.2011.5.25.157.2.4 |
| hwPplmAlarmResume This object indicates that the higher order path (HP) signal identifier mismatch is rectified. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.40 |
| hwPaisAlarm This object indicates that a path alarm indication signal is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.41 |
| hwPaisAlarmResume This object indicates that the path alarm indication signal is removed. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.42 |
| hwAuAisAlarm This object indicates that a higher order path (HP) indication signal alarm is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.43 |
| hwAuAisAlarmResume This object indicates that the higher order path (HP) indication signal alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.44 |
| hwVlopAlarm This object indicates that an alarm is generated when the administrative unit (AU) pointer is lost. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.45 |
| hwVlopAlarmResume This object indicates that the alarm generated due to the loss of the AU pointer is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.46 |
| hwLomAlarm This object indicates the loss of multiframe (LOM) on the higher order path (HP). | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.47 |
| hwLomAlarmResume This object indicates that the LOM on the higher order path (HP) is resolved. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.48 |
| hwLpTimVc12Alarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.49 |
| hwCesPwRemoteLosPktAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.5 |
| hwLpTimVc12AlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.50 |
| hwLpUneqVc12Alarm This object indicates that a lower order path (LP) unequipped indication signal (PUNEQ) alarm is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.51 |
| hwLpUneqVc12AlarmResume This object indicates that the PUNEQ alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.52 |
| hwVrdiAlarm This object indicates that a lower order path (LP) remote defect indication (PRDI) alarm is generated. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.53 |
| hwVrdiAlarmResume This object indicates that the PRDI alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.54 |
| hwBip2TcaAlarm This object indicates that an alarm is generated for the BIP signal degrade. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.57 |
| hwBip2TcaAlarmResume This object indicates that the alarm for the BIP signal degrade is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.58 |
| hwLpSlmVc12Alarm This object indicates a lower order path (LP) signal label mismatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.59 |
| hwCesPwRemoteLosPktAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.6 |
| hwLpSlmVc12AlarmResume This object indicates that the lower order path (LP) signal label mismatch alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.60 |
| hwTuAisVc12Alarm This object indicates TU alarm indication. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.61 |
| hwTuAisVc12AlarmResume This object indicates that the TU alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.62 |
| hwE1EstcaAlarm This object indicates that the number of errored seconds exceeds a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.63 |
| hwE1EstcaAlarmResume This object indicates that the number of errored seconds falls below a specified threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.64 |
| hwE1LmfaAlarm This object indicates an LOM alarm on the framed E1. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.67 |
| hwE1LmfaAlarmResume This object indicates that the LOM alarm on the framed E1 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.68 |
| hwE1UpE1AisAlarm This object indicates that an upstream alarm indication signal is generated on an E1 interface. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.69 |
| hwCesPwOppositeRai Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.7 |
| hwE1UpE1AisAlarmResume This object indicates that the upstream alarm indication signal generated on an E1 interface is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.70 |
| hwE1AlmE1RaiAlarm This object indicates that a remote alarm indication (RAI) signal is generated on an E1 link. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.71 |
| hwE1AlmE1RaiAlarmResume This object indicates that the RAI signal generated on an E1 link is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.72 |
| hwCesPwOppositeAcFault This object indicates that an alarm is generated when the attachment circuit on the peer device goes faulty. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.73 |
| hwCesPwOppositeAcFaultResume This object indicates that a clear alarm is generated when the attachment circuit fault on the peer device is rectified. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.74 |
| hwCesLosPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.75 |
| hwCesLosPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.76 |
| hwCesMisorderPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.77 |
| hwCesMisorderPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.78 |
| hwCesStrayPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.79 |
| hwCesPwOppositeRaiResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.8 |
| hwCesStrayPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.80 |
| hwCesMalPktExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.81 |
| hwCesMalPktExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.82 |
| hwCesJtrUdrExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.83 |
| hwCesJtrUdrExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.84 |
| hwCesJtrOvrExcAlarm Indicates the alarm is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.85 |
| hwCesJtrOvrExcAlarmResume Indicates the alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.86 |
| hwRroolAlarm This object indicates that an alarm is generated when there is no clock on the receive line. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.87 |
| hwRroolAlarmResume This object indicates that a clear alarm is generated when there is a clock on the receive line. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.88 |
| hwVrfiAlarm This object indicates that an alarm is generated when a lower order path (LP) remote failure indication (RFI) signal is detected. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.89 |
| hwLosAlarm This object indicates that an alarm is generated due to signal loss at the receive end. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.9 |
| hwVrfiAlarmResume This object indicates that a clear alarm is generated when the lower order path (LP) remote failure indication (RFI) signal is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.90 |
| hwV5VcaisAlarm This object indicates that an alarm indication signal is generated in the virtual container. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.91 |
| hwV5VcaisAlarmResume This object indicates that the alarm indication signal generated in the virtual container is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.92 |
| hwCposE1AlmE1RaiAlarm This object indicates that an RAI signal is generated on an E1 link channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.95 |
| hwCposE1AlmE1RaiAlarmResume This object indicates that the RAI signal generated on an E1 link channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.96 |
| hwCposE1LfaAlarm This object indicates that an out of frame (OOF) alarm is generated on the framed E1 channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.97 |
| hwCposE1LfaAlarmResume This object indicates that the OOF alarm generated on the framed E1 channelized from VC12 is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.98 |
| hwCposE1UpE1AisAlarm This object indicates that an upstream alarm indication signal is generated on an E1 link channelized from VC12. | notification | - | .1.3.6.1.4.1.2011.5.25.157.2.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ENTITY-MIBentPhysicalName The textual name of the physical entity. The value of this
object should be the name of the component as assigned by
the local device and should be suitable for use in commands
e… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.47.1.1.1.1.7 |