hwGBondGroupProfEntry

HUAWEI-GBOND-MIB · .1.3.6.1.4.1.2011.6.137.6.1

MIB view Table view

Object

row

The table hwGBondGroupProfTable contains the bonding group profile
configuration. 
A default profile with an index of 'DEFVAL' will always exist and 
its parameters will be set to vendor-specific values, unless otherwise 
specified in this document.
The index of this entry is hwGBondGroupProfName.

Context

MIB: HUAWEI-GBOND-MIB
OID: .1.3.6.1.4.1.2011.6.137.6.1
Type: row
Status: current
Parent: hwGBondGroupProfTable
Table: hwGBondGroupProfTable
Children: 16

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
hwGBondGroupProfName This object identifies a row in this table.	column	OctetString	`.1.3.6.1.4.1.2011.6.137.6.1.1`
hwGBondGroupProfTargetDataRateUs A desired G.Bond port data rate in the upstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by their respective config…	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.10`
hwGBondGroupProfTargetDataRateDs A desired G.Bond port data rate in the downstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by their respective conf…	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.11`
hwGBondGroupProfThreshLowDataRateUs This object configures the G.Bond port low upstream rate crossing alarm threshold. The value of 0 means that the low upstream data rate is not fixed.	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.12`
hwGBondGroupProfThreshLowDataRateDs This object configures the G.Bond port low downstream rate crossing alarm threshold. The value of 0 means that the low downstream data rate is not fixed.	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.13`
hwGBondGroupProfLowRateCrossingEnable Indicates whether hwGBondLowUpRateCrossingAlarmTrap and hwGBondLowDownRateCrossingAlarmTrap notifications should be generated for this interface. Options: 1. enable(1) - I…	column	Enumeration	`.1.3.6.1.4.1.2011.6.137.6.1.14`
hwGBondGroupProfRowStatus This object is used to create a new row or delete an existing row in this table. Before a profile can be deleted, it must be not referenced from all associated bonding group.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.6.137.6.1.15`
hwGBondGroupProfBondCpeIncorrectAlarmSwitch This object enable/disable the bonding CPE incorrect alarm switch. Options: 1. enable(1) - The bonding CPE incorrect alarm switch is enabled 2. disable(2) - The bonding CPE inco…	column	Enumeration	`.1.3.6.1.4.1.2011.6.137.6.1.16`
hwGBondGroupProfMaxDelayUs This parameter is the maximum one-way interleaving delay introduced by the PMS-TC on upstream direction.	column	milliseconds Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.2`
hwGBondGroupProfMaxDelayDs This parameter is the maximum one-way interleaving delay introduced by the PMS-TC on downstream direction.	column	milliseconds Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.3`
hwGBondGroupProfMinProtectionUs This parameter is minimum impulse noise protection for the bearer channel in the upstream direction, expressed in symbols. The parameter can take the following values: noProtecti…	column	symbols GBondSymbolProtection	`.1.3.6.1.4.1.2011.6.137.6.1.4`
hwGBondGroupProfMinProtectionDs This parameter is minimum impulse noise protection for the bearer channel in the downstream direction, expressed in symbols. The parameter can take the following values: noProtec…	column	symbols GBondSymbolProtection	`.1.3.6.1.4.1.2011.6.137.6.1.5`
hwGBondGroupProfMinDataRateUs This parameter specifics minimum data rate for the bearer channel in the upstream direction. The value of 0 means that the minimum upstream data rate is not fixed.	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.6`
hwGBondGroupProfMinDataRateDs This parameter specifics minimum data rate for the bearer channel in the downstream direction. The value of 0 means that the minimum downstream data rate is not fixed.	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.7`
hwGBondGroupProfMaxDataRateUs This parameter specifics maximum data rate for the bearer channel in the upstream direction. The value of 0 means that the maximum upstream data rate is not fixed.	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.8`
hwGBondGroupProfMaxDataRateDs This parameter specifics maximum data rate for the bearer channel in the downstream direction. The value of 0 means that the maximum downstream data rate is not fixed.	column	Kbps Unsigned32	`.1.3.6.1.4.1.2011.6.137.6.1.9`

Indexes