hwEntFxsPortSendGain

HUAWEI-ENT-VOICE-PORT-MIB · .1.3.6.1.4.1.2011.5.25.252.1.1.2

MIB view Table view

Object

column r/w Integer32

Indicates the send gain the fxs port.
 0:    5 dB
 1:  4.5 dB
 2:    4 dB
 3:  3.5 dB
 4:    3 dB
 5:  2.5 dB
 6:    2 dB
 7:  1.5 dB
 8:    1 dB
 9:  0.5 dB
10:    0 dB
11: -0.5 dB
12:   -1 dB
13: -1.5 dB
14:   -2 dB
15: -2.5 dB
16:   -3 dB
17: -3.5 dB
18:   -4 dB
19: -4.5 dB
20:   -5 dB
21: -5.5 dB
22:   -6 dB
Default: 10

Context

MIB: HUAWEI-ENT-VOICE-PORT-MIB
OID: .1.3.6.1.4.1.2011.5.25.252.1.1.2
Type: column
Access: readwrite
Status: current
Parent: hwEntFxsPortConfigEntry
Table: hwEntFxsPortConfigTable
Siblings: 17

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-22

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwEntFxsPortIndex Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.252.1.1.1`
hwEntFxsPortClipReversePole Indicates whether to support the polarity-reversing pulse when Clip. enable(1) disable(2) Default: disable(2)	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.252.1.1.10`
hwEntFxsPortImpedance Indicates the port impedance of the board. Each value corresponds to the required impedance in a specified scenario. 0: Bureau machine in China (200+680\|\| 100nf) 1: User machine…	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.11`
hwEntFxsPortCurrent Port current supported by the board. The value ranges from 0 to 1, which indicates the port current value. 0: 16mA steady current 1: 20mA steady current Default: 1	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.12`
hwEntFxsPortHighLevel Indicates the high power level width. Default: 100 Unit: ms	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.13`
hwEntFxsPortLowLevel Indicates the low power level width. Default: 300 Unit: ms	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.14`
hwEntFxsPortKcType Indicates the KC type. Options: 1. type16kc(1) 2. type12kc(2) Default: type16kc(1)	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.252.1.1.15`
hwEntFxsPortVoltage Indicates the valid voltage value of KC. 0: 0.45 Vrms 1: 0.775 Vrms 2: 1.0 Vrms 3: 1.5 Vrms 4: 2.0 Vrms 5: 2.5 Vrms 6: 3.0 Vrms 7: 3.5 Vrms …	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.16`
hwEntFxsPortActualSendGain Indicates the actual send gain of the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB …	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.17`
hwEntFxsPortActualRecvGain Indicates the actual receive gain of the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB …	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.18`
hwEntFxsPortRecvGain Indicates the receive gain the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9…	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.3`
hwEntFxsPortDialMode Indicates the dialing mode. Options: dtmfPulseBoth(1) -DTMF pulse both dtmfOnly(2) -DTMF only pulseOnly(3) -Pulse only Default: dtmfPulseBoth(1)	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.252.1.1.4`
hwEntFxsPortReversePoleEnable Indicates whether to support the polarity-reversing pulse. Options: enable(1) disable(2) Default: enable(1)	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.252.1.1.5`
hwEntFxsPortReversePoleLevel Indicates the level width of the polarity-reversing pulse. Default: 100 Unit: ms Step: 10 ms.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.252.1.1.6`
hwEntFxsPortPolarityReverseMode Indicates the polarity reversal mode. Options: hard(1) -Hard polarity reversal soft(2) -Soft polarity reversal Default: hard(1)	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.252.1.1.7`
hwEntFxsPortLineLock Indicates whether to support lock port. enable(1) disable(2) Default: enable(1)	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.252.1.1.8`
hwEntFxsPortNlpMode Indicates the Nlp mode of the port. normal(1) -Normal mode ecGainAdjust(2) -Ec gain adjust mode enhance(3) -Enhance mode reduce(4) -Reduce mode disable(5)…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.252.1.1.9`