hwEntFxsPortNlpMode

HUAWEI-ENT-VOICE-PORT-MIB · .1.3.6.1.4.1.2011.5.25.252.1.1.9
MIB view Table view

Object

column r/w Enumeration 
Indicates the Nlp mode of the port.
normal(1)         -Normal mode
ecGainAdjust(2)   -Ec gain adjust mode
enhance(3)        -Enhance mode
reduce(4)         -Reduce mode
disable(5):       -Close mode
Default: normal(1)

Context

MIB
HUAWEI-ENT-VOICE-PORT-MIB
OID
.1.3.6.1.4.1.2011.5.25.252.1.1.9
Type
column
Access
readwrite
Status
current
Parent
hwEntFxsPortConfigEntry
Table
hwEntFxsPortConfigTable
Siblings
17

Syntax

Enumeration

Values & Constraints

Enumerated Values
1normal
2ecGainAdjust
3enhance
4reduce
5disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwEntFxsPortIndex
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.1
hwEntFxsPortClipReversePole
Indicates whether to support the polarity-reversing pulse when Clip. enable(1) disable(2) Default: disable(2)
columnEnumeration.1.3.6.1.4.1.2011.5.25.252.1.1.10
hwEntFxsPortImpedance
Indicates the port impedance of the board. Each value corresponds to the required impedance in a specified scenario. 0: Bureau machine in China (200+680|| 100nf) 1: User machine…
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.11
hwEntFxsPortCurrent
Port current supported by the board. The value ranges from 0 to 1, which indicates the port current value. 0: 16mA steady current 1: 20mA steady current Default: 1
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.12
hwEntFxsPortHighLevel
Indicates the high power level width. Default: 100 Unit: ms
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.13
hwEntFxsPortLowLevel
Indicates the low power level width. Default: 300 Unit: ms
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.14
hwEntFxsPortKcType
Indicates the KC type. Options: 1. type16kc(1) 2. type12kc(2) Default: type16kc(1)
columnEnumeration.1.3.6.1.4.1.2011.5.25.252.1.1.15
hwEntFxsPortVoltage
Indicates the valid voltage value of KC. 0: 0.45 Vrms 1: 0.775 Vrms 2: 1.0 Vrms 3: 1.5 Vrms 4: 2.0 Vrms 5: 2.5 Vrms 6: 3.0 Vrms 7: 3.5 Vrms …
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.16
hwEntFxsPortActualSendGain
Indicates the actual send gain of the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB …
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.17
hwEntFxsPortActualRecvGain
Indicates the actual receive gain of the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB …
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.18
hwEntFxsPortSendGain
Indicates the send gain the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB 10: 0 dB 11: -0.5 …
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.2
hwEntFxsPortRecvGain
Indicates the receive gain the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9…
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.3
hwEntFxsPortDialMode
Indicates the dialing mode. Options: dtmfPulseBoth(1) -DTMF pulse both dtmfOnly(2) -DTMF only pulseOnly(3) -Pulse only Default: dtmfPulseBoth(1)
columnEnumeration.1.3.6.1.4.1.2011.5.25.252.1.1.4
hwEntFxsPortReversePoleEnable
Indicates whether to support the polarity-reversing pulse. Options: enable(1) disable(2) Default: enable(1)
columnEnumeration.1.3.6.1.4.1.2011.5.25.252.1.1.5
hwEntFxsPortReversePoleLevel
Indicates the level width of the polarity-reversing pulse. Default: 100 Unit: ms Step: 10 ms.
columnInteger32.1.3.6.1.4.1.2011.5.25.252.1.1.6
hwEntFxsPortPolarityReverseMode
Indicates the polarity reversal mode. Options: hard(1) -Hard polarity reversal soft(2) -Soft polarity reversal Default: hard(1)
columnEnumeration.1.3.6.1.4.1.2011.5.25.252.1.1.7
hwEntFxsPortLineLock
Indicates whether to support lock port. enable(1) disable(2) Default: enable(1)
columnEnumeration.1.3.6.1.4.1.2011.5.25.252.1.1.8