hwEntFxsPortImpedance
HUAWEI-ENT-VOICE-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.252.1.1.11
Object
column
r/w
Integer32
Indicates the port impedance of the board. Each value corresponds to the required impedance in a specified scenario. 0: Bureau machine in China (200+680|| 100nf) 1: User machine in China (200+560|| 100nf) 2: 600-ohm interface 3: Interface of Russia (150+510|| 47nf) 4: (220+820|| 115nf ) 5: (220+820|| 120nf ) 6: 900-ohm interface 7: Interface of Brazil (800|| 50nf) 8: BT0(Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF) 9: HK_BT3(Zin=370+620|| 310nf,Zload=600) 10: HK_BT5(Zin=270+264|| 357nf+1434|| 265nf,Zload=600) 11: BT1(BT0 without AGC) 12: BT2(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(270 +264 //357nF+1434 //265nF)) 13: BT3(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF)) 14: Commonly used in Europe (Zin= 270+750|| 150nf) 15: New zealand (Zin=370+620|| 310nf) Default: 2
Context
- MIB
- HUAWEI-ENT-VOICE-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.252.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwEntFxsPortConfigEntry
- Table
- hwEntFxsPortConfigTable
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntFxsPortIndex Indicates the slot/subcard/port index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.252.1.1.1 |
| hwEntFxsPortClipReversePole Indicates whether to support the polarity-reversing pulse when Clip.
enable(1)
disable(2)
Default: disable(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.1.1.10 |
| hwEntFxsPortCurrent Port current supported by the board. The value ranges from 0 to 1, which indicates the port current value.
0: 16mA steady current
1: 20mA steady current
Default: 1 | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.12 |
| hwEntFxsPortHighLevel Indicates the high power level width.
Default: 100
Unit: ms | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.13 |
| hwEntFxsPortLowLevel Indicates the low power level width.
Default: 300
Unit: ms | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.14 |
| hwEntFxsPortKcType Indicates the KC type.
Options:
1. type16kc(1)
2. type12kc(2)
Default: type16kc(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.1.1.15 |
| hwEntFxsPortVoltage Indicates the valid voltage value of KC.
0: 0.45 Vrms
1: 0.775 Vrms
2: 1.0 Vrms
3: 1.5 Vrms
4: 2.0 Vrms
5: 2.5 Vrms
6: 3.0 Vrms
7: 3.5 Vrms … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.16 |
| hwEntFxsPortActualSendGain Indicates the actual send gain of the fxs port.
0: 5 dB
1: 4.5 dB
2: 4 dB
3: 3.5 dB
4: 3 dB
5: 2.5 dB
6: 2 dB
7: 1.5 dB
8: 1 dB
9: 0.5 dB
… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.17 |
| hwEntFxsPortActualRecvGain Indicates the actual receive gain of the fxs port.
0: 0 dB
1: -0.5 dB
2: -1 dB
3: -1.5 dB
4: -2 dB
5: -2.5 dB
6: -3 dB
7: -3.5 dB … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.18 |
| hwEntFxsPortSendGain Indicates the send gain the fxs port.
0: 5 dB
1: 4.5 dB
2: 4 dB
3: 3.5 dB
4: 3 dB
5: 2.5 dB
6: 2 dB
7: 1.5 dB
8: 1 dB
9: 0.5 dB
10: 0 dB
11: -0.5 … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.2 |
| hwEntFxsPortRecvGain Indicates the receive gain the fxs port.
0: 0 dB
1: -0.5 dB
2: -1 dB
3: -1.5 dB
4: -2 dB
5: -2.5 dB
6: -3 dB
7: -3.5 dB
8: -4 dB
9… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.3 |
| hwEntFxsPortDialMode Indicates the dialing mode.
Options:
dtmfPulseBoth(1) -DTMF pulse both
dtmfOnly(2) -DTMF only
pulseOnly(3) -Pulse only
Default: dtmfPulseBoth(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.1.1.4 |
| hwEntFxsPortReversePoleEnable Indicates whether to support the polarity-reversing pulse.
Options:
enable(1)
disable(2)
Default: enable(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.1.1.5 |
| hwEntFxsPortReversePoleLevel Indicates the level width of the polarity-reversing pulse.
Default: 100
Unit: ms
Step: 10 ms. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.252.1.1.6 |
| hwEntFxsPortPolarityReverseMode Indicates the polarity reversal mode.
Options:
hard(1) -Hard polarity reversal
soft(2) -Soft polarity reversal
Default: hard(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.1.1.7 |
| hwEntFxsPortLineLock Indicates whether to support lock port.
enable(1)
disable(2)
Default: enable(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.1.1.8 |
| hwEntFxsPortNlpMode Indicates the Nlp mode of the port.
normal(1) -Normal mode
ecGainAdjust(2) -Ec gain adjust mode
enhance(3) -Enhance mode
reduce(4) -Reduce mode
disable(5)… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.252.1.1.9 |