hwLoopLineTestTrap

HUAWEI-COMMTEST-MIB · .1.3.6.1.4.1.2011.6.21.1.2.3.0.1

Object

notification

This trap will be sent when a loop-line test finished successfully. The trap shows 
the result of the loop-line test.
1. hwLoopLineTestRequestID, 
2. hwLoopLineTestStatus, 
3. hwLoopLineTestConclusion, 
4. hwLoopLineTestACAG, 
5. hwLoopLineTestACBG, 
6. hwLoopLineTestACAB, 
7. hwLoopLineTestDCAG, 
8. hwLoopLineTestDCBG, 
9. hwLoopLineTestDCAB, 
10. hwLoopLineTestRAG, 
11. hwLoopLineTestRBG, 
12. hwLoopLineTestRAB, 
13. hwLoopLineTestCapAG, 
14. hwLoopLineTestCapBG, 
15. hwLoopLineTestCapAB, 
16. hwLoopLineTestLR, 
17. hwLoopLineTestRABResPole,
18. hwLoopLineTestMSocket,  
19. hwLoopLineTestPPAResult,
19. hwLoopLineTestIfIndex,
20. hwLoopLineTestMoreDataFlag

Context

MIB: HUAWEI-COMMTEST-MIB
OID: .1.3.6.1.4.1.2011.6.21.1.2.3.0.1
Type: notification
Status: current
Parent: hwTestCommonGeneralTrapsOIDs
Siblings: 7

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwMeterTestTrap Meter test result trap: 1: hwMeterTestStatus. This trap will send when meter test result return.	notification	-	`.1.3.6.1.4.1.2011.6.21.1.2.3.0.2`
hwTestBoardDiagnoseTestTrap Test board self-test result trap: 1: hwTestBoardDiagnoseTestResult; 2: hwTestBoardDiagnoseTestRAM; 3: hwTestBoardDiagnoseTestVoltage; 4: hwTestBoardDiagnoseTestResistance; 5: hw…	notification	-	`.1.3.6.1.4.1.2011.6.21.1.2.3.0.3`
hwTestBoardStatusQueryTrap Test board status query result trap: 1: hwTestBoardStatusQueryResult; 2: hwTestBoardStatusQueryVersion; 3: hwTestBoardStatusQueryTestItem; 4: hwTestBoardStatusTestedBoardIfIndex.…	notification	-	`.1.3.6.1.4.1.2011.6.21.1.2.3.0.4`
hwTestOntPotsTestResultTrap This trap indicates that a POTS port line test finished successfully, and shows the result of the line test. This trap will send when a POTS port line test finished successfully.	notification	-	`.1.3.6.1.4.1.2011.6.21.1.2.3.0.5`
hwTestCommonMeltTestResultTrap This trap indicates that MELT test finished successfully, and show the result of the melt test This trap will send when the MELT test finished successfully.	notification	-	`.1.3.6.1.4.1.2011.6.21.1.2.3.0.6`
hwTestCommonMeltTestFaileTrap This trap indicates that MELT test fails. This trap will send when the MELT test failed.	notification	-	`.1.3.6.1.4.1.2011.6.21.1.2.3.0.7`
hwTestMeltChipStateCheckResultTrap This trap indicates the MELT chip status check result. This trap will send when the MELT chip status check finished.	notification	-	`.1.3.6.1.4.1.2011.6.21.1.2.3.0.8`

Notification Objects

Object	Type	Syntax	OID
hwLoopLineTestRequestID Request ID. The value is the fourth parameter in the trap message.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.91`
hwLoopLineTestStatus Indicates the result of MELT test. Options: 1. normal(1) -the MELT test is successful 2. testFail(2) -the MELT test fails 3. portBusy(3) -the MELT te…	column	Enumeration	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.8`
hwLoopLineTestConclusion MELT test conclusion, this object is for pots and combo board's port. Options: 1. normal(1) -the test conclusion is normal 2. meetLine(2) -the t…	column	Enumeration	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.9`
hwLoopLineTestACAG Indicates the A->ground AC voltage. Unit: mV	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.10`
hwLoopLineTestACBG Indicates the B->ground AC voltage. Unit: mV	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.11`
hwLoopLineTestACAB Indicates the A->B AC voltage. Unit: mV	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.12`
hwLoopLineTestDCAG Indicates the A->ground DC voltage. Unit: mV	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.13`
hwLoopLineTestDCBG Indicates the B->ground DC voltage. Unit: mV	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.14`
hwLoopLineTestDCAB Indicates the A->B DC voltage. Unit: mV	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.15`
hwLoopLineTestRAG Indicates the A->ground insulation resistance. Unit: ohm	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.16`
hwLoopLineTestRBG Indicates the B->ground insulation resistance. Unit: ohm	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.17`
hwLoopLineTestRAB Indicates the A->B insulation resistance. Unit: ohm	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.18`
hwLoopLineTestCapAG Indicates the A->ground capacitance. Unit: nF	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.19`
hwLoopLineTestCapBG Indicates the B->ground capacitance. Unit: nF	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.20`
hwLoopLineTestCapAB Indicates the A->B capacitance. Unit: nF	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.21`
hwLoopLineTestLR Indicates the loop resistance. Unit: ohm	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.22`
hwLoopLineTestRABResPole Indicates the A->B polarity reversal resistance. Unit: ohm	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.23`
hwLoopLineTestMSocket Indicates the M-socket connection. Options: 1. notconnected(1) -the M-socket is not connected 2. connected(2) -the M-socket is connected 3. aBReversed(3) -the wire A and wi…	column	Enumeration	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.24`
hwLoopLineTestPPAResult Indicates whether the PPA exists. Options: 1. noexist(1) -PPA does not exist 2. exist(2) -PPA exists 3. inverseexist(3) -PPA inverse exists 4. invalid(-1) -i…	column	Enumeration	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.43`
hwLoopLineTestIfIndex Port IfIndex.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.90`
hwLoopLineTestMoreDataFlag Indicates is there more data Options: 1. more(1) -Indicates there is more data needs report,but needs a SNMP-GET oper. to get other data. 2. invalid(-1) …	column	Enumeration	`.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.206`