hwCmtsDownstreamSweepRfPower

HUAWEI-CMTS-MIB · .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.4
MIB view Table view

Object

column r/w 0.1dBmV SNMPv2-SMIInteger32 
Indicates the sweep signal Tx power.
The minimum value is determined by the product, the same as D3.0 channels.
Invalid value is -2147483647.

Context

MIB
HUAWEI-CMTS-MIB
OID
.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.4
Type
column
Access
readwrite
Status
current
Units
0.1dBmV
Parent
hwCmtsDownstreamSweepEntry
Table
hwCmtsDownstreamSweepTable
Siblings
9

Syntax

0.1dBmV SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwCmtsDownstreamSweepOperation
Indicates an operation to control sweeping. Options: 1.start(1) - indicates the dowmstream sweeping is started. 2.stop(2) - indicates the dowmstream sweeping is stoped.
columnEnumeration.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.1
hwCmtsDownstreamSweepRemainingTime
Indicates the remaining time of the downstream sweeping. Invalid value is -1.
columns SNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.10
hwCmtsDownstreamSweepFreqList
The frequency list for the downstream sweeping. It can contain as most as 32 frequencies. Every 10 octets represent a frequency. Use commas (,) to separate different frequencies.
columnHz OctetString.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.2
hwCmtsDownstreamSweepFreqWidth
Indicates the sweep signal spectrum width. The value must be an integer multiple of 10000. Invalid value is -1.
columnHz Integer32.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.3
hwCmtsDownstreamSingleSweepSignalSendTime
Indicates the duration of sending a single sweep signal for once. Invalid value is -1.
columnms Integer32.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.5
hwCmtsDownstreamSweepTimeOut
Indicates the sweeping timeout period. Invalid value is -1.
columns Integer32.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.6
hwCmtsDownstreamSweepStatus
Indicates the status of the downstream sweeping. Options: 1.idle(1) - idle status 2.sweeping(2) - sweeping status
columnEnumeration.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.7
hwCmtsDownstreamSweepSupportFlag
Indicates the flag of a cable board support the downstream sweeping. Options: 1.unknown(1) - unknown 2.support(2) - support 3.unsupport(3) - not support
columnEnumeration.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.8
hwCmtsDownstreamSweepMaxPermitRfPower
Indicates the Maximum sending power of sweep signal be allowed. Invalid value is -2147483647.
column0.1dBmV SNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.9