hwCmtsDownstreamSingleSweepSignalSendTime
HUAWEI-CMTS-MIB ·
.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.5
Object
column
r/w
ms Integer32
Indicates the duration of sending a single sweep signal for once. Invalid value is -1.
Context
- MIB
- HUAWEI-CMTS-MIB
- OID
.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- ms
- Parent
- hwCmtsDownstreamSweepEntry
- Table
- hwCmtsDownstreamSweepTable
- Siblings
- 9
Syntax
ms Integer32
Values & Constraints
Object Constraints
range: -1--1
range: 200-5000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwCmtsDownstreamSweepOperation Indicates an operation to control sweeping.
Options:
1.start(1) - indicates the dowmstream sweeping is started.
2.stop(2) - indicates the dowmstream sweeping is stoped. | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.1 |
| hwCmtsDownstreamSweepRemainingTime Indicates the remaining time of the downstream sweeping.
Invalid value is -1. | column | s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.10 |
| hwCmtsDownstreamSweepFreqList The frequency list for the downstream sweeping.
It can contain as most as 32 frequencies.
Every 10 octets represent a frequency.
Use commas (,) to separate different frequencies. | column | Hz OctetString | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.2 |
| hwCmtsDownstreamSweepFreqWidth Indicates the sweep signal spectrum width.
The value must be an integer multiple of 10000.
Invalid value is -1. | column | Hz Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.3 |
| hwCmtsDownstreamSweepRfPower Indicates the sweep signal Tx power.
The minimum value is determined by the product, the same as D3.0 channels.
Invalid value is -2147483647. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.4 |
| hwCmtsDownstreamSweepTimeOut Indicates the sweeping timeout period.
Invalid value is -1. | column | s Integer32 | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.6 |
| hwCmtsDownstreamSweepStatus Indicates the status of the downstream sweeping.
Options:
1.idle(1) - idle status
2.sweeping(2) - sweeping status | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.7 |
| hwCmtsDownstreamSweepSupportFlag Indicates the flag of a cable board support the downstream sweeping.
Options:
1.unknown(1) - unknown
2.support(2) - support
3.unsupport(3) - not support | column | Enumeration | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.8 |
| hwCmtsDownstreamSweepMaxPermitRfPower Indicates the Maximum sending power of sweep signal be allowed.
Invalid value is -2147483647. | column | 0.1dBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.9 |