hwCmtsDownstreamSweepFreqWidth

HUAWEI-CMTS-MIB · .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.3

MIB view Table view

Object

column r/w Hz Integer32

Indicates the sweep signal spectrum width.
The value must be an integer multiple of 10000.
Invalid value is -1.

Context

MIB: HUAWEI-CMTS-MIB
OID: .1.3.6.1.4.1.2011.6.180.1.1.20.90.1.3
Type: column
Access: readwrite
Status: current
Units: Hz
Parent: hwCmtsDownstreamSweepEntry
Table: hwCmtsDownstreamSweepTable
Siblings: 9

Syntax

Hz Integer32

Values & Constraints

Object Constraints

range: -1--1 range: 50000-1000000

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwCmtsDownstreamSweepOperation Indicates an operation to control sweeping. Options: 1.start(1) - indicates the dowmstream sweeping is started. 2.stop(2) - indicates the dowmstream sweeping is stoped.	column	Enumeration	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.1`
hwCmtsDownstreamSweepRemainingTime Indicates the remaining time of the downstream sweeping. Invalid value is -1.	column	s SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.10`
hwCmtsDownstreamSweepFreqList The frequency list for the downstream sweeping. It can contain as most as 32 frequencies. Every 10 octets represent a frequency. Use commas (,) to separate different frequencies.	column	Hz OctetString	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.2`
hwCmtsDownstreamSweepRfPower Indicates the sweep signal Tx power. The minimum value is determined by the product, the same as D3.0 channels. Invalid value is -2147483647.	column	0.1dBmV SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.4`
hwCmtsDownstreamSingleSweepSignalSendTime Indicates the duration of sending a single sweep signal for once. Invalid value is -1.	column	ms Integer32	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.5`
hwCmtsDownstreamSweepTimeOut Indicates the sweeping timeout period. Invalid value is -1.	column	s Integer32	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.6`
hwCmtsDownstreamSweepStatus Indicates the status of the downstream sweeping. Options: 1.idle(1) - idle status 2.sweeping(2) - sweeping status	column	Enumeration	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.7`
hwCmtsDownstreamSweepSupportFlag Indicates the flag of a cable board support the downstream sweeping. Options: 1.unknown(1) - unknown 2.support(2) - support 3.unsupport(3) - not support	column	Enumeration	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.8`
hwCmtsDownstreamSweepMaxPermitRfPower Indicates the Maximum sending power of sweep signal be allowed. Invalid value is -2147483647.	column	0.1dBmV SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.180.1.1.20.90.1.9`