hpnsaPciClassCode

HPNSAPCI-MIB · .1.3.6.1.4.1.11.2.23.10.4.1.1.8

Object

column mandatory OctetString

Identifies the generic function of the device.
              
Base    Sub-    Prog
Class   Class   If.    Meaning
-----   -----   -----  -------
 00h                   Device built before Class Code
			  definitions were finalized.
	 00h     00h   All currently implemented devices
			  except VGA compatible devices.
	 01h     00h   VGA compatible device
              
 01h                   Mass Storage controller
	 00h     00h      SCSI bus controller
	 01h     00h      IDE controller
	 02h     00h      Floppy disk controller
	 03h     00h      IPI bus controller
	 80h     00h      Other mass storage controller
              
 02h                   Network controller
	 00h    00h       Ethernet controller
	 01h    00h       Token Ring controller
	 02h    00h       FDDI controller
	 80h    00h       Other network controller
              
 03h                   Display controller
	 00h    00h       VGA compatible controller
	 01h    00h       XGA controller
	 80h    00h       Other display controller
              
 04h                   Multimedia device
	 00h    00h       Video
	 01h    00h       Audio
	 80h    00h       Other multimedia device
              
 05h                   Memory controller
	 00h    00h       RAM
	 01h    00h       Flash
	 80h    00h       Other memory controller
              
 06h                   Bridge device
	 00h    00h       Host bridge
	 01h    00h       ISA bridge
	 02h    00h       EISA bridge
	 03h    00h       MC bridge
	 04h    00h       PCI-to-PCI bridge
	 05h    00h       PCMCIA bridge
	 80h    00h       Other bridge device
              
 07h-FEh               Reserved
 FFh                   Device does not fit in any
			 defined classes.

Context

MIB: HPNSAPCI-MIB
OID: .1.3.6.1.4.1.11.2.23.10.4.1.1.8
Type: column
Access: readonly
Status: mandatory
Parent: hpnsaPciEntry
Table: hpnsaPciTable
Siblings: 19

Syntax

OctetString

Values & Constraints

Object Constraints

range: 3-3

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hpnsaPciBusIndex mandatory The PCI Bus number that this entry describes.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.1`
hpnsaPciStatus mandatory Status information for PCI bus related events. Bit Description --- ------------ 0-6 Reserved 7 Fast Back-to-Back Capable 8 Data Parity Detec…	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.10`
hpnsaPciCacheLineSize mandatory Specifies the system cache line size in units of 32-bit words.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.11`
hpnsaPciLatencyTimer mandatory Specifies, in units of PCI bus clocks, the value of the Latency Timer for this PCI bus master.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.12`
hpnsaPciBist mandatory This optional register is used for control and status of Built-in Self Test. Devices that don't support BIST must always return a value of 0. Bit Description --…	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.13`
hpnsaPciInterruptLine mandatory Communicates interrupt line routing information. The value in this register tells which input of the system interrupt contoller(s) the device's interrupt pin is connected to.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.14`
hpnsaPciInterruptPin mandatory Tells which interrupt pin the device uses.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.15`
hpnsaPciMaxLat mandatory Specifies how often the device needs to gain access to the PCI bus.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.16`
hpnsaPciMinGnt mandatory Specifies how long a burst period the device needs assuming a clock rate of 33MHz.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.17`
hpnsaPciBaseAddrRegs mandatory Base address mapping registers for memory and IO. Refer to the PCI specification for the format.	column	OctetString	`.1.3.6.1.4.1.11.2.23.10.4.1.1.18`
hpnsaPciExpRomBaseAddr mandatory 4-byte register is defined to handle the base address and size information for an expansion ROM. Bit Description --- ------------ 31-11 Expansion ROM Bas…	column	OctetString	`.1.3.6.1.4.1.11.2.23.10.4.1.1.19`
hpnsaPciDeviceIndex mandatory The PCI device or slot number that this entry describes.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.2`
hpnsaPciDeviceSpecific mandatory Device specific configuration space.	column	OctetString	`.1.3.6.1.4.1.11.2.23.10.4.1.1.20`
hpnsaPciSlotNumber mandatory The physical PCI slot number	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.21`
hpnsaPciFunctionIndex mandatory The PCI function that this entry describes.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.3`
hpnsaPciDeviceId mandatory Identifies the particular device. This identier is allocated by the vendor. Device ID Description --------- ------------ XXXX Blah! Blah!	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.5`
hpnsaPciRevisionId mandatory Specifies a device specific revision identifier.	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.6`
hpnsaPciHeaderType mandatory Idendifies the layout of bytes 10h-3Fh in configuration space and whether or not the device contains multiple functions. Bit 7: 1=multi-function device, 0=single…	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.7`
hpnsaPciCommand mandatory Provides course control over a device's ability to generate and respond to PCI cylces. Bit Description --- ------------ 0 IO Space 1 Memory Spac…	column	Integer32	`.1.3.6.1.4.1.11.2.23.10.4.1.1.9`