hpnicfMainPseEntry
HPN-ICF-POWER-ETH-EXT-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1
Object
row
The pethMainPseGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices.
Context
- MIB
- HPN-ICF-POWER-ETH-EXT-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1- Type
- row
- Status
- current
- Parent
- hpnicfMainPseTable
- Table
- hpnicfMainPseTable
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfMainPsePowerLimit The object specifies the power limit set for the unit as a whole.
The PoE unit will already have a nominal power defined by the
IETF Power MIB [1] pethMainPsePower object. This O… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.1 |
| hpnicfMainPseAveragePower The object specifies the average power which has been consumed
by the port. It is a read/write integer value with units of
Watts (note - Watts is chosen instead of milliWatts her… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.2 |
| hpnicfMainPsePeakPower The object specifies the peak power which has been consumed for PoE.
It is defined as the highest measured value of power in milliWatts
that has been consumed at any one point in … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.3 |
| hpnicfMainGuaranteedPowerRemaining The object specifies the amount of power remaining in the guaranteed
power pool. Each time a port is placed into guaranteed mode it
reserves a set amount of power out of the tota… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.4 |
| hpnicfMainPsePriorityMode Describes or controls the priority mode on slot which must be
enabled firstly. When a new board is inserted, and the power is
over-load, a value of disconnection(0) means that th… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5 |
| hpnicfMainPseLegacy Describes or controls the legacy mode on slot which must be enabled
firstly. Legacy mode: standard or nonstandard PD detection mode. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.6 |
| hpnicfMainPsePowerPriority Describes or controls the priority of the PSE. The priority
will be used by the PSE policy to prevent from power overloading.
If the priority of PSE is set to critical, the PSE w… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.7 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| POWER-ETHERNET-MIBpethMainPseGroupIndex This variable uniquely identifies the group to which
power Ethernet PSE is connected. Group means (box in
the stack, module in a rack) and the value 1 MUST be
used for non-modula… | column | Integer32 | .1.3.6.1.2.1.105.1.3.1.1.1 |