hpnicfEponPortLoopBackAlmEnable

HPN-ICF-EPON-MIB · .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
LoopBack alarm behavior of EPON ports.
true(1)  - alarm enable.
false(2) - alarm disable.

Context

MIB
HPN-ICF-EPON-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8
Type
scalar
Access
readwrite
Status
current
Parent
hpnicfEponSysMan
Siblings
19

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfEponAutoAuthorize
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU register…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1
hpnicfEponMonitorCycleMaxVal
The upper limit of cycle which be confined to the hpnicfEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10
hpnicfEponMsgTimeOutMinVal
The lower limit of timeout which be confined to the hpnicfEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11
hpnicfEponMsgTimeOutMaxVal
The upper limit of timeout which be confined to the hpnicfEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12
hpnicfEponMsgLoseNumMinVal
The lower limit of time which be confined to the hpnicfEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13
hpnicfEponMsgLoseNumMaxVal
The upper limit of time which be confined to the hpnicfEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14
hpnicfEponSysScalarGroupnode-.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15
hpnicfEponSysManTable
This table defines system related parameters.
table-.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16
hpnicfEponAutoUpdateTable
EPON auto update ONU application configuration.
table-.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17
hpnicfEponOuiIndexNextTable
Next OUI index table.
table-.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18
hpnicfEponOuiTable
List of OUI and OAM supported by OLT.
table-.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19
hpnicfEponMonitorCycle
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. Th…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2
hpnicfEponMulticastControlTable
Multicast control global configuration.
table-.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20
hpnicfEponMsgTimeOut
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3
hpnicfEponMsgLoseNum
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4
hpnicfEponSysHasEPONBoard
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5
hpnicfEponMonitorCycleEnable
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6
hpnicfEponOltSoftwareErrAlmEnable
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7
hpnicfEponMonitorCycleMinVal
The lower limit of cycle which be confined to the hpnicfEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9