HPN-ICF-EPON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
42
Rows
42
Columns
233

hpnicfEponSysManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16 · 1 row entry · 7 columns
Open in standard view 
This table defines system related parameters.
hpnicfEponSysManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1
The entry of the table hpnicfEponSysManTable.
Indexes
hpnicfEponSlotIndex
Column Syntax OID
hpnicfEponSlotIndex
Slot Index, the index of hpnicfEponSysManTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1
hpnicfEponModeSwitch
cmode - epon standard mode.
hmode - private mode.
Enumerationr/w
Enumerated Values:
1cmode
2hmode
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2
hpnicfEponAutomaticMode
Automatic mode setting: when enabled - after
new OLT is added, the OLT stack sets its encryption mode
to 'triple churning' and configure the OLT to authorize
ONU MAC addresses according to its table.
enable -enable aut…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3
hpnicfEponOamDiscoveryTimeout
Time out parameter for extended OAM discovery
process message, ranging from 0 to 2550,
measured in 100 milliseconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4
hpnicfEponEncryptionNoReplyTimeOut
Encryption response timeout,
ranging from 1 to 2550,
measured in 100 milliseconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5
hpnicfEponEncryptionUpdateTime
Encryption key update timer for all ONUs on slot,
indicated by hpnicfEponSlotIndex,
ranging from 1 to 255, measured in seconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6
hpnicfEponAutoBindStatus
enable - auto bind ONU ID when the ONU registered in the EPON system.
disable - need manual bind ONU ID when the ONU registered in the EPON system.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7

hpnicfEponAutoUpdateTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17 · 1 row entry · 5 columns
Open in standard view 
EPON auto update ONU application configuration.
hpnicfEponAutoUpdateEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1
The entry of the table hpnicfEponAutoUpdateTable.
Indexes
hpnicfEponSlotIndex
Column Syntax OID
hpnicfEponAutoUpdateFileName
The name of ONU application file, the file name must be valid
and include the path. It is a zero length string by default.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1
hpnicfEponAutoUpdateSchedStatus
The status of schedule update configuration.
The hpnicfEponAutoUpdateFileName must be set before enable
hpnicfEponAutoUpdateSchedStatus.
enable - enable ONU schedule update.
disable - disable ONU schedule update.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2
hpnicfEponAutoUpdateSchedTime
The schedule update timing configuration is related to
the hpnicfEponAutoUpdateSchedType.
auto update daily: the string format is hhmm
auto update weekly: the string format is hhmmw
'w' means update weekly, it ranges fr…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3
hpnicfEponAutoUpdateSchedType
The update type of auto updating configuration.
daily - update ONU application every day.
weekly - update ONU application every week.
comingdate - update ONU application on coming date.
Enumerationr/w
Enumerated Values:
1daily
2weekly
3comingdate
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4
hpnicfEponAutoUpdateRealTimeStatus
The status of real time update configuration.
The hpnicfEponAutoUpdateFileName must be set before enable
hpnicfEponAutoUpdateRealTimeStatus.
enable - enable ONU real time update.
disable - disable ONU real time update.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5

hpnicfEponOuiIndexNextTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18 · 1 row entry · 1 columns
Open in standard view 
Next OUI index table.
hpnicfEponOuiIndexNextEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1
The entry of the table hpnicfEponOuiIndexNextTable.
Indexes
hpnicfEponSlotIndex
Column Syntax OID
hpnicfEponOuiIndexNext
This object contains an appropriate value to be used for
hpnicfEponOuiIndex when creating rows in the
hpnicfEponOuiTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1

hpnicfEponOuiTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19 · 1 row entry · 4 columns
Open in standard view 
List of OUI and OAM supported by OLT.
hpnicfEponOuiEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1
The entry of the table hpnicfEponOuiTable.
Indexes
hpnicfEponSlotIndex hpnicfEponOuiIndex
Column Syntax OID
hpnicfEponOuiIndex
The index of this table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1
hpnicfEponOuiValue
OUI list supported by the extended OAM discovery process.
The OUI is composed of six octets. The first six octets denote the first OUI ,
the second six octets denote the second OUI, and the like.
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2
hpnicfEponOamVersion
Version of OAM protocol defined by the organization denoted by OUI.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3
hpnicfEponOuiRowStatus
The status of this table entry. Only active,
createAndGo and the destory are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4

hpnicfEponMulticastControlTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20 · 1 row entry · 3 columns
Open in standard view 
Multicast control global configuration.
hpnicfEponMulticastControlEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1
The entry of the table hpnicfEponMulticastControlTable.
Indexes
hpnicfEponMulticastVlanId
Column Syntax OID
hpnicfEponMulticastVlanId
The index of this table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1
hpnicfEponMulticastAddressList
The multicast address, each four octets represents a multicast address,
the address section ranging from the first four octets to the second
four octets, and the like.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2
hpnicfEponMulticastStatus
The status of this table entry. Only active,
createAndGo and the destory are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3

hpnicfOltSysManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1 · 1 row entry · 7 columns
Open in standard view 
This table defines several OLT system parameters:
(1)laser on time
(2)laser off time
(3)whether multiple copy broadcast
(4)whether discard packet
(5)self test
(6)self test result
hpnicfOltSysManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1
The entry of the table hpnicfOltSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOltLaserOnTime
The laser on time of the ONUs during the
discovery process, measured in Time Quanta(TQ).
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1
hpnicfOltLaserOffTime
The laser off time of the ONUs during the
discovery process, measured in TQ.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2
hpnicfOltMultiCopyBrdCast
true/false filtering of tagged multicast frames.
The software avert tagged downstream frames with
multicast or broadcast DA to the PON and not to the
CPU, except for special multicast frames
(link-constraint, IGMP cont…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3
hpnicfOltEnableDiscardPacket
Forward(false)/discard(true) any frames received from
unlearned source address when the inside address
table of the original ONU entry reach to the limit.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4
hpnicfOltSelfTest
selftest(1): Test OLT to check whether it's OK.
Enumerationr/w
Enumerated Values:
1selftest
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5
hpnicfOltSelfTestResult
The self test result of the specific OLT.
other(1): The self test result is another reason.
ok(2): The self test result is OK.
fail(3): The self test result is fail.
Enumeration
Enumerated Values:
1other
2ok
3fail
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6
hpnicfOltMaxRtt
Set the max Round Trip Time of this OLT.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7

hpnicfOltInfoTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2 · 1 row entry · 10 columns
Open in standard view 
Primary status of the specified OLT.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified OLT
(hpnicfOltFirmMajorVersion, hpnicfOltFirmMinorVersion,
hpnicfOltHardMajorVersion, hpnicfOltHardMinorVersion)
(2)Several physical capabilities of an OLT device.
(hpnicfOltAgcLockTime, hpnicfOltAgcCdrTime)
(3)The operation(activation) status of an OLT.
(hpnicfOltMacAddress, hpnicfOltWorkMode)
hpnicfOltInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1
The entry of the table hpnicfOltInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOltFirmMajorVersion
OLT firmware major version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1
hpnicfOltFirmMinorVersion
OLT firmware minor version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2
hpnicfOltHardMajorVersion
OLT hardware major version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3
hpnicfOltHardMinorVersion
OLT hardware minor version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4
hpnicfOltAgcLockTime
PON upstream data Automatic Gain Control(AGC) lock time,
measured in TQ,
range: 1 - 2^15.
0x7FFFFFFF: unknown value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5
hpnicfOltAgcCdrTime
PON RX signal synchronization time,
measured in TQ,
range: 1 - 2^15.
0x7FFFFFFF: unknown value
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6
hpnicfOltMacAddress
OLT MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7
hpnicfOltWorkMode
The operation(activation) modes of an OLT.
other(1) - The OLT is in another mode.
open(2) - The OLT is open.
reset(3) - The OLT is reset.
closed(4) - The OLT is closed.
Enumeration
Enumerated Values:
1other
2open
3reset
4closed
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8
hpnicfOltOpticalPowerTx
The optical power transmitted by this OLT.
It measured in 0.01 dBm unit.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9
hpnicfOltOpticalPowerRx
The burst optical power received by this OLT.
It measured in 0.01 dBm unit.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10

hpnicfOltDbaManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3 · 1 row entry · 7 columns
Open in standard view 
This table defines the primary parameters of the
Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
hpnicfOltDbaManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1
The entry of the table hpnicfOltDbaManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOltDbaEnabledType
Enable different types of the DBA algorithm.
Start upstream dynamic bandwidth allocation algorithm,
replacing former bandwidth allocation mechanism.
internal(1) - OLT internal Service Level Agreement(SLA) based
algorith…
Enumerationr/w
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1
hpnicfOltDbaDiscoveryLength
Discovery length in TQ units.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2
hpnicfOltDbaDiscovryFrequency
How often should the OLT send discovery frames to
the ONUs, measured in grant cycles.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3
hpnicfOltDbaCycleLength
The grant cycle length in TQ units.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4
hpnicfOltDbaVersion
DBA version of the OLT.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5
hpnicfOltDbaUpdate
Update(1): Update the DBA algorithm with a binary
file which is loaded to the OLT from an external source(flash).
Config the MIB object module hpnicfEponDbaUpdateFileName.
Enumerationr/w
Enumerated Values:
1update
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6
hpnicfOltDbaUpdateResult
The latest DBA update result.
other: The DBA update result is another reason.
ok: The DBA update result is OK.
fail: The DBA update result is fail.
fileNotExist: The DBA update failed because the file
does not exist…
Enumeration
Enumerated Values:
1other
2ok
3fail
4fileNotExist
5notSetFilename
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7

hpnicfOltPortAlarmThresholdTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4 · 1 row entry · 16 columns
Open in standard view 
The table defines the alarm threshold of OLT.
hpnicfOltPortAlarmThresholdEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1
The entry of the table hpnicfOltPortAlarmThresholdTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOltPortAlarmBerEnabled
Behavior of BER alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1
hpnicfOltPortAlarmBerDirect
Traffic direction to monitor for BER alarm.
Enumerationr/w
Enumerated Values:
1berUplink
2berDownlink
3berAll
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2
hpnicfOltPortAlarmBerThreshold
BER threshold exceed which the alarm is raised.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3
hpnicfOltPortAlarmFerEnabled
Behavior of FER alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4
hpnicfOltPortAlarmFerDirect
Traffic direction to monitor for FER alarm.
Enumerationr/w
Enumerated Values:
1ferUplink
2ferDownlink
3ferAll
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5
hpnicfOltPortAlarmFerThreshold
Frame error rate exceed threshold then the alarm is raised.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6
hpnicfOltPortAlarmLlidMismatchEnabled
Behavior of LLID mismatch alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7
hpnicfOltPortAlarmLlidMismatchThreshold
The minimal number of mismatched frames exceed threshold then
LLID mismatch alarm is raised.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8
hpnicfOltPortAlarmRemoteStableEnabled
Behavior of remote stable alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9
hpnicfOltPortAlarmLocalStableEnabled
Behavior of local stable alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10
hpnicfOltPortAlarmRegistrationEnabled
Behavior of registration alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11
hpnicfOltPortAlarmOamDisconnectionEnabled
Behavior of Operations Administration and Maintenance(OAM)
disconnection alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12
hpnicfOltPortAlarmEncryptionKeyEnabled
Behavior of encryption bad key alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13
hpnicfOltPortAlarmVendorSpecificEnabled
Behavior of vendor specific alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14
hpnicfOltPortAlarmRegExcessEnabled
Behavior of ONU registering over limitation alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15
hpnicfOltPortAlarmDFEEnabled
Behavior of device fatal error alarm.
true - alarm enable.
false - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16

hpnicfOnuSilentTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21 · 1 row entry · 2 columns
Open in standard view 
This table is used for getting silent ONU information of OLT.
hpnicfOnuSilentEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1
The entry of the table hpnicfOnuSilentTable.
Indexes
IF-MIBifIndex hpnicfOnuSilentMacAddr
Column Syntax OID
hpnicfOnuSilentMacAddr
The MAC address of silent ONUs in OLT.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1
hpnicfOnuSilentTime
The aging time of a silent ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2

hpnicfOltUsingOnuTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22 · 1 row entry · 3 columns
Open in standard view 
The table containing configurations to manage ONU interface(s)
based on OLT interface.
hpnicfOltUsingOnuEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1
The entry of the table hpnicfOltUsingOnuTable.
Indexes
IF-MIBifIndex hpnicfOltUsingOnuNum
Column Syntax OID
hpnicfOltUsingOnuNum
The ONU interface number. This value is used to specify the ONU interface
which the user wants to configure for an OLT interface.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1
hpnicfOltUsingOnuIfIndex
The ifIndex of the ONU interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2
hpnicfOltUsingOnuRowStatus
This object is responsible for managing the creation,
deletion and modification of rows, which supports active
status and CreatAndGo, destroy operation.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3

hpnicfOnuSysManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1 · 1 row entry · 15 columns
Open in standard view 
This table implements the following functions for ONUs:
1. Encrypting all downstream/upstream and
downstream directions traffic destined to and
originated from a specific LLID
(ONU in current implementation).
2. Restart a process of ONU authentication, using
the OLT (IEEE 802.1x) authenticator.
hpnicfOnuSysManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1
The entry of the table hpnicfOnuSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuEncryptMan
Start encrypting all downstream/upstream and downstream
directions traffic destined to and originated from a
specific LLID (ONU in current implementation). ONU
registration encryption key is used as an initial value.
I…
Enumerationr/w
Enumerated Values:
1off
2downlink
3updownlink
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1
hpnicfOnuReAuthorize
Restart a process of ONU authentication.
If 802.1x authentication is enabled, the OLT
(IEEE 802.1x) authenticator is applied.
Otherwise, use the default authentication.
Until the reauthentication succeeds, the ONU remai…
Enumerationr/w
Enumerated Values:
1reAuthorize
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2
hpnicfOnuMulticastFilterStatus
true(1) - Multicast-Filter enable on ONU.
false(2) - Multicast-Filter disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3
hpnicfOnuDbaReportQueueSetNumber
The number of queue sets reported in MPCP report frames.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4
hpnicfOnuRemoteFecStatus
Value that indicates status of the 1000BASE-PX PHY
optional FEC Sublayer for forward error correction
see [802.3ah] clause 65.2.
enable - enable remote forward error correction.
disable - disable remote forward error co…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5
hpnicfOnuPortBerStatus
enable - enable ONU port bit error rate alarm.
disable - disable ONU port bit error rate alarm.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6
hpnicfOnuReset
Reboot ONU.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7
hpnicfOnuMulticastControlMode
igmpsnooping - the traditional IGMP snooping mode.
multicastcontrol - the specific multicast control mode.
Enumerationr/w
Enumerated Values:
1igmpsnooping
2multicastcontrol
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8
hpnicfOnuAccessVlan
The VLAN ID assigned to untagged frames received on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9
hpnicfOnuEncryptKey
The encryption key, used to encrypt all downstream
traffic destined to and/or upstream traffic originating
from a specific ONU. It is a zero length, or MD5 hashed string,
by default, the string is empty.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10
hpnicfOnuUniUpDownTrapStatus
true - A notification will be sent when UNI link status is change.
false - Device will not sent notification when UNI link status is
change.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11
hpnicfOnuFecStatus
Value that indicates status of the 1000BASE-PX PHY
optional FEC Sublayer for forward error correction
(include remote onu and local OLT)
see [802.3ah] clause 65.2
enable - enable forward error correction.
disable - disa…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12
hpnicfOnuMcastCtrlHostAgingTime
The host aging time of multicast control mode on ONU,
ranging from 200 to 1000, measured in seconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13
hpnicfOnuMulticastFastLeaveEnable
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU.
false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14
hpnicfOnuPortIsolateEnable
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU.
false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15

hpnicfOnuLinkTestTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2 · 1 row entry · 12 columns
Open in standard view 
LLID link test applying to the ONU only including delay
measurement option.  The command tests a link to a single
LLID over a period of time or once, using a variable
number of measurement frames.  The length of the measurement
frames is also parameterized.  The test uses a loopback
mode of the ONU to return each measurement frame,
loopback activation is done using randomly patterned
OAM Protocol Data Unit(PDU) frames.
hpnicfOnuLinkTestEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1
The entry of hpnicfOnuLinkTestEntry.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuLinkTestFrameNum
Exact number of measurement frames.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1
hpnicfOnuLinkTestFrameSize
Measurement frames data size, measured in bytes.
Not including Preamble, SFD, VLAN tag, and FCS.
Frame size minimum value is 56 - if VLAN tag is
enabled('VLAN enable' field is set to ENABLE),
and 60 - if VLAN tag is dis…
Integer32r/w
Constraints:
range: 60-1514
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2
hpnicfOnuLinkTestDelay
true:Link test includes delay measurement,
which corresponds to the difference between sent
and received times(including granting delay and
firmware processing time overheads).
false:Link test not includes a delay measu…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3
hpnicfOnuLinkTestVlanTag
true:Enable VLAN tag in link test frames.
false:Link test not includes frames with VLAN tag.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4
hpnicfOnuLinkTestVlanPriority
VLAN priority: 0-7.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5
hpnicfOnuLinkTestVlanTagID
VLAN ID: 1-4094.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6
hpnicfOnuLinkTestResultSentFrameNum
The total number of frames sent during the link test process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7
hpnicfOnuLinkTestResultRetFrameNum
The total number of frames return back during the link test process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8
hpnicfOnuLinkTestResultRetErrFrameNum
The total number of error frames return back during the
link test process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9
hpnicfOnuLinkTestResultMinDelay
The minimum delay time in TQ units, which corresponds
to the difference between sent and received times
(including granting delay and firmware processing time
overheads). It's invalid if the field
'hpnicfOnuLinkTestDel…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10
hpnicfOnuLinkTestResultMeanDelay
The average delay time in TQ units, which corresponds
to the difference between sent and received times
(including granting delay and firmware processing time
overheads). It's invalid if the field
'hpnicfOnuLinkTestDel…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11
hpnicfOnuLinkTestResultMaxDelay
The maximum delay time in TQ units, which corresponds
to the difference between sent and received times
(including granting delay and firmware processing time
overheads). It's invalid if the field
'hpnicfOnuLinkTestDel…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12

hpnicfOnuBandWidthTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3 · 1 row entry · 10 columns
Open in standard view 
Set bandwidth policy parameters(restrictions)for a LLID
(only for the ONU).  Default policies are set to disable.
Policy parameters will be erased upon LLID network disconnection.
hpnicfOnuBandWidthEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1
The entry of table hpnicfOnuBandWidthTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuDownStreamBandWidthPolicy
true:Enable static bandwidth configuration policing.
false:Disable static bandwidth configuration policing.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1
hpnicfOnuDownStreamMaxBandWidth
Maximum bandwidth allowed for the ONU,
measured in Kbits/Sec.
Integer32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2
hpnicfOnuDownStreamMaxBurstSize
Maximal number of bytes in a burst.
The value is truncated to the nearest
smaller 128 bytes multiple value,
measured in bytes.
Integer32r/w
Constraints:
range: 0-8388480
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3
hpnicfOnuDownStreamHighPriorityFirst
true:Enable high priority frames preference.
false:Disable high priority frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4
hpnicfOnuDownStreamShortFrameFirst
true:Enable short frames preference.
false:Disable short frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5
hpnicfOnuP2PBandWidthPolicy
true:Enable static bandwidth configuration policing.
false:Disable static bandwidth configuration policing.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6
hpnicfOnuP2PMaxBandWidth
Maximum bandwidth allowed for the ONU,
measured in Kbits/Sec.
Integer32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7
hpnicfOnuP2PMaxBurstSize
Maximal number of bytes in a burst.
The value is truncated to the nearest
smaller 128 bytes multiple value,
measured in bytes.
Integer32r/w
Constraints:
range: 0-8388480
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8
hpnicfOnuP2PHighPriorityFirst
true:Enable high priority frames preference.
false:Disable high priority frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9
hpnicfOnuP2PShortFrameFirst
true:Enable short frames preference.
false:Disable short frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10

hpnicfOnuSlaManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4 · 1 row entry · 7 columns
Open in standard view 
Two types of DBA algorithm are supported in the ONU.
The internal SLA based algorithm is always activated.
This table defines the primary parameter about the
internal SLA algorithm.
hpnicfOnuSlaManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1
The entry of table hpnicfOnuSlaManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuSlaMaxBandWidth
Maximum bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of hpnicfOnuSlaBandWidthStepVal.
The minimum bandwidth should not be larger than the maximum
bandwidth.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1
hpnicfOnuSlaMinBandWidth
Minimum bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of hpnicfOnuSlaBandWidthStepVal.
The maximum bandwidth should be larger than the minimum bandwidth.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2
hpnicfOnuSlaBandWidthStepVal
Granularity of bandwidth - measured in Kbit/s.
The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should
be the multiple of the value of this object.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3
hpnicfOnuSlaDelay
low - low delay.
high - high delay.
The delay constraint of a specific ONU. Set to high may improve the
bandwidth usage at the cost of delay.
Enumerationr/w
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4
hpnicfOnuSlaFixedBandWidth
Fixed bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of hpnicfOnuSlaBandWidthStepVal.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5
hpnicfOnuSlaPriorityClass
Precedence of this flow over others in case of contention.
0 is the lowest priority and 7 is the highest priority.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6
hpnicfOnuSlaFixedPacketSize
Fixed packet size - measured in byte.
The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7

hpnicfOnuInfoTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5 · 1 row entry · 18 columns
Open in standard view 
Primary status of the specified ONU.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified ONU
(hpnicfOnuHardMajorVersion, hpnicfOnuHardMinorVersion,
hpnicfOnuUniMacType)
(2)Several physical capabilities of the ONU.
(hpnicfOnuLaserOnTime, hpnicfOnuLaserOffTime,
hpnicfOnuGrantFifoDep.)
(3)The operation(activation) status of the ONU.
(hpnicfOnuWorkMode)
hpnicfOnuInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1
The entry of the hpnicfOnuInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuHardMajorVersion
ONU hardware major version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1
hpnicfOnuHardMinorVersion
ONU hardware minor version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2
hpnicfOnuSoftwareVersion
ONU software version.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3
hpnicfOnuUniMacType
ONU User Network Interface(UNI) port MAC type.
Enumeration
Enumerated Values:
1other
2mii
3gmii
4tbi
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4
hpnicfOnuLaserOnTime
The ONU laser on time measured in TQ units. If the object value is
0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5
hpnicfOnuLaserOffTime
The ONU laser off time measured in TQ units. If the object value is
0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6
hpnicfOnuGrantFifoDep
Maximal number of grant records an ONU can store,
relevant to ONU only.
range: 1 - 255.
0x7FFFFFFF: unknown value.
Integer32
Constraints:
range: 1-255
range: 2147483647-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7
hpnicfOnuWorkMode
The operation(activation) mode of an ONU.
other(1) - ONU is in another mode.
on(2) - ONU is registered and authorized to the
network. In this mode it works
as a media converter.
pending(3) - ONU has been registe…
Enumeration
Enumerated Values:
1other
2on
3pending
4off
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8
hpnicfOnuPCBVersion
ONU PCB version.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9
hpnicfOnuRtt
The signal round-trip-time(RTT) received.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10
hpnicfOnuEEPROMVersion
ONU EEPROM version.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11
hpnicfOnuRegType
ONU registered type.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12
hpnicfOnuHostType
ONU host type.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13
hpnicfOnuDistance
The distance between OLT and ONU, measured in meter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14
hpnicfOnuLlid
The link layer identifier, which uniquely identifies the ONU
of a specific OLT.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15
hpnicfOnuVendorId
ONU vendor ID.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16
hpnicfOnuFirmwareVersion
ONU firmware version.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17
hpnicfOnuOpticalPowerReceivedByOlt
The burst ONU optical power received by OLT,
and when the ONU status is up the value is usable.
It measured in 0.01 dBm unit.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18

hpnicfOnuMacAddrInfoTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6 · 1 row entry · 3 columns
Open in standard view 
This table used for getting MAC address information of ONU.
hpnicfOnuMacAddrInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1
The entry of the hpnicfEponOnuMacAddrInfoTable.
Indexes
IF-MIBifIndex hpnicfOnuMacIndex
Column Syntax OID
hpnicfOnuMacIndex
The index of ONUs in one OLT.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1
hpnicfOnuMacAddrFlag
The flag of ONU status.
1 - bound:The ONU is bound but not registered.
2 - registered:The ONU is registered but not bound.
3 - run:The ONU is registered and bound on one OLT.
4 - regIncorrect:The ONU is bound on one OLT…
Enumeration
Enumerated Values:
1bound
2registered
3run
4regIncorrect
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2
hpnicfOnuMacAddress
The MAC address of ONU.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3

hpnicfOnuBindMacAddrTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7 · 1 row entry · 2 columns
Open in standard view 
This table implements the following functions for ONUs:
Bind MAC of ONU.
hpnicfOnuBindMacAddrEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1
The entry of the table hpnicfOnuBindMacAddrTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuBindMacAddress
Bind the MAC of ONU.
While the MAC is not bound, the ONU can not go into
effect and configurations can not be set.
Set 0-0-0 (MAC address) to the EPON device port will
unbind the relationship with the original MAC and
c…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1
hpnicfOnuBindType
Set the binding type with the ONU which is confined
to the index of hpnicfEponOnuTypeDescr.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2

hpnicfOnuFirmwareUpdateTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8 · 1 row entry · 3 columns
Open in standard view 
This table implements the following functions for ONUs:
1. Update the ONU firmware.
2. Result of update ONU firmware.
hpnicfOnuFirmwareUpdateEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1
The entry of the table hpnicfOnuFirmwareUpdateTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuUpdate
update(1): Update the ONU firmware.
Config the MIB object module hpnicfEponOnuUpdateFileName
with the filename of ONU firmware first.
Enumerationr/w
Enumerated Values:
1update
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1
hpnicfOnuUpdateResult
The ONU firmware update result.
updating - The ONU is updating firmware right now.
ok - The ONU update result is OK.
fail - The ONU update result is fail.
fileNotExist - The ONU update failed because the file doe…
Enumeration
Enumerated Values:
1updating
2ok
3fail
4fileNotExist
5notSetFilename
6fileNotMatchONU
7timeout
8otherError
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2
hpnicfOnuUpdateFileName
The filename of the ONU firmware to be updated.
Note that the filename must contain the file path.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3

hpnicfEponOnuTypeManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15 · 1 row entry · 2 columns
Open in standard view 
This table is used for getting ONU bind type in current version.
hpnicfEponOnuTypeManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1
The entry of the hpnicfEponOnuTypeManTable.
Indexes
hpnicfEponOnuTypeIndex
Column Syntax OID
hpnicfEponOnuTypeIndex
The ONU type index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1
hpnicfEponOnuTypeDescr
The ONU type description which can be used to bind ONU in current
version.
the value of hpnicfOnuBindType can be configured by the index of
hpnicfEponOnuTypeDescr.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2

hpnicfOnuPacketManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16 · 1 row entry · 2 columns
Open in standard view 
This table implements the following functions:
(1)Manage packet priority trust mode.
(2)Manage packet queue-scheduler mode.
hpnicfOnuPacketManEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1
The entry of the hpnicfOnuPacketManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuPriorityTrust
The QOS mode which is assigned on ONU.
dscp - The service dscp of politic Priority.
ipprecedence - The service IP precedence of politic Priority.
cos - The service cos of politic Priority.
Enumerationr/w
Enumerated Values:
1dscp
2ipprecedence
3cos
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1
hpnicfOnuQueueScheduler
The packet queue-scheduler mode which is assigned on ONU.
spq - strict priority queuing.
wfq - specifies the weights for weighted round-robin queuing.
Enumerationr/w
Enumerated Values:
1spq
2wfq
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2

hpnicfOnuProtocolTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17 · 1 row entry · 10 columns
Open in standard view 
This table implements the following functions:
(1)Manage STP status.
(2)Manage IGMP-snooping.
(3)Manage DHCP-snooping.
hpnicfOnuProtocolEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1
The entry of hpnicfOnuProtocolTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuStpStatus
true(1) - STP status enable on ONU.
false(2) - STP status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1
hpnicfOnuIgmpSnoopingStatus
true(1) - IGMP snooping status enable on ONU.
false(2) - IGMP snooping status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2
hpnicfOnuDhcpsnoopingOption82
true(1) - DHCP snooping Option 82 status enable on ONU.
false(2) - DHCP snooping Option 82 status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3
hpnicfOnuDhcpsnooping
true(1) - DHCP snooping status enable on ONU.
false(2) - DHCP snooping status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4
hpnicfOnuPppoe
true(1) - PPPOE status enable on ONU.
false(2) - PPPOE status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5
hpnicfOnuIgmpSnoopingHostAgingT
Set the host aging time of IGMP on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6
hpnicfOnuIgmpSnoopingMaxRespT
Set the max response time of IGMP on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7
hpnicfOnuIgmpSnoopingRouterAgingT
Set the router aging time of IGMP on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8
hpnicfOnuIgmpSnoopingAggReportS
true(1) - Igmp snooping aggregation report status enable on ONU.
false(2) - Igmp snooping aggregation report status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9
hpnicfOnuIgmpSnoopingAggLeaveS
true(1) - Igmp snooping aggregation leave status enable on ONU.
false(2) - Igmp snooping aggregation leave status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10

hpnicfOnuDot1xTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18 · 1 row entry · 2 columns
Open in standard view 
This table implements the following functions:
(1)Manage 802.1x account.
(2)Manage 802.1x password.
ONU will be authorized to send and receive frames when the
account and the password are all right, otherwise this ONU
will be unavailable.
hpnicfOnuDot1xEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1
The entry of the hpnicfOnuDot1xTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuDot1xAccount
ONU 802.1X account.
The object value cannot be set as 'a', 'al' or 'all'.
The object should be set together with hpnicfOnuDot1xPassword.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1
hpnicfOnuDot1xPassword
ONU 802.1X password.
The object should be set together with hpnicfOnuDot1xAccount.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2

hpnicfOnuPriorityQueueTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19 · 1 row entry · 3 columns
Open in standard view 
This table contains specific information of priority queue.
hpnicfOnuPriorityQueueEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1
The entry of hpnicfOnuPriorityQueueTable.
Indexes
IF-MIBifIndex hpnicfOnuQueueDirection hpnicfOnuQueueId
Column Syntax OID
hpnicfOnuQueueDirection
The direction of priority queue.
Enumeration
Enumerated Values:
1inbound
2outbound
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1
hpnicfOnuQueueId
The queue ID of priority queue.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2
hpnicfOnuQueueSize
The size of priority queue, measured in percent. The total length of
all priority queues is a constant, by default, it is assigned to all
of the priority queues evenly. The length of each priority queue may
be changed b…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3

hpnicfOnuCountTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20 · 1 row entry · 2 columns
Open in standard view 
This table contains statistics of ONU port.
hpnicfOnuCountEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1
The entry of hpnicfOnuCountTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuInCRCErrPkts
The total number of frames received with bad CRC checksum.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1
hpnicfOnuOutDroppedFrames
The total number of frames dropped because of buffer failure.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2

hpnicfOnuQueueBandwidthTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22 · 1 row entry · 3 columns
Open in standard view 
This table contains specific bandwidth information of ONU priority queue.
hpnicfOnuQueueBandwidthEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1
The entry of hpnicfOnuQueueBandwidthTable.
Indexes
IF-MIBifIndex hpnicfOnuQueueDirection hpnicfOnuQueueId
Column Syntax OID
hpnicfOnuQueueMaxBandwidth
The maximum bandwidth of specific ONU priority queue,
measured in 100Kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1
hpnicfOnuQueueMaxBurstsize
The maximum burst size of specific ONU priority queue,
measured in 64Bytes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2
hpnicfOnuQueuePolicyStatus
true - enable bandwidth policy
false - disable bandwidth policy
The bandwidth administrative status of specific ONU priority queue.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3

hpnicfOnuIpAddressTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23 · 1 row entry · 6 columns
Open in standard view 
ONU IP address table.
hpnicfOnuIpAddressEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1
The entry of hpnicfOnuIpAddressTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuIpAddress
The IP address assigned to the ONU.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1
hpnicfOnuIpAddressMask
The mask of IP address denoted by hpnicfOnuIpAddress.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2
hpnicfOnuIpAddressGateway
The gateway of IP address denoted by hpnicfOnuIpAddress.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3
hpnicfOnuDhcpallocate
true(1) - ONU auto allocate IP address status enable.
false(2) - ONU auto allocate IP address status disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4
hpnicfOnuManageVID
The management VLAN of ONU denoted by hpnicfOnuManageVID.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5
hpnicfOnuManageVlanIntfS
The management interface status of ONU denoted by hpnicfOnuManageVlanIntfS.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6

hpnicfOnuChipSetInfoTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24 · 1 row entry · 4 columns
Open in standard view 
ONU vendor specific information of ONU.
hpnicfOnuChipSetInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1
The entry of hpnicfOnuChipSetInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuChipSetVendorId
Chipset vendor ID, which identifies the ONU's PON chip vendor
according JEDEC ID code.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1
hpnicfOnuChipSetModel
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2
hpnicfOnuChipSetRevision
Chip revision.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3
hpnicfOnuChipSetDesignDate
Chip design date.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4

hpnicfOnuCapabilityTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25 · 1 row entry · 12 columns
Open in standard view 
Capability of ONU.
hpnicfOnuCapabilityEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1
The entry of the table hpnicfOnuCapabilityTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuServiceSupported
Services types supported by the ONU.
These functional groups can be supported independently.
geinterfacesupport - supporting (1)/not supporting(0)
Gbit Ethernet GE interface.
feinterfacesupport - supporting (1)/not supp…
Bits
Enumerated Values:
0geinterfacesupport
1feinterfacesupport
2voipservicesupport
3tdmservicesupport
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1
hpnicfOnuGEPortNumber
The current gigabit ethernet ports number supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2
hpnicfOnuFEPortNumber
the current fast ethernet ports number supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3
hpnicfOnuPOTSPortNumber
The current POTS ports number supported by the ONU
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4
hpnicfOnuE1PortsNumber
The current E1 ports number supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5
hpnicfOnuUpstreamQueueNumber
The number of upstream queues supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6
hpnicfOnuMaxUpstreamQueuePerPort
The number of maximum upstream queues per port of the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7
hpnicfOnuDownstreamQueueNumber
The number of downstream queues supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8
hpnicfOnuMaxDownstreamQueuePerPort
The number of maximum downstream queues per port of the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9
hpnicfOnuBatteryBackup
true(1) - ONU supports a reserve battery.
false(2) - ONU does not support a reserve battery.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10
hpnicfOnuIgspFastLeaveSupported
true(1) - ONU supports fast leave in igsp mode.
false(2) - ONU does not support fast leave in igsp mode.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11
hpnicfOnuMCtrlFastLeaveSupported
true(1) - ONU supports fast leave in multicast control mode.
false(2) - ONU does not support fast leave in multicast control mode.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12

hpnicfOnuDbaReportTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26 · 1 row entry · 3 columns
Open in standard view 
This table defines the information of DBA(dynamic bandwidth allocation)
report threshold contained in the MPCP report frames.
hpnicfOnuDbaReportEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1
The entry of the table hpnicfOnuDbaReportTable.
Indexes
IF-MIBifIndex hpnicfOnuDbaReportQueueId
Column Syntax OID
hpnicfOnuDbaReportQueueId
The DBA report queue ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1
hpnicfOnuDbaReportThreshold
The threshold of the DBA report queue.
the following is the queue ID and
the related default threshold setting.
1 - 0
2 - 0
3 - 0
4 - 65535
5 - 65535
6 - 0
7 - 0
8 - 0
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2
hpnicfOnuDbaReportStatus
enable -threshold configuration is active for the queue.
disable -threshold configuration is not active for the queue.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3

hpnicfOnuCosToLocalPrecedenceTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27 · 1 row entry · 2 columns
Open in standard view 
Table of map of the COS to local-precedence.
hpnicfOnuCosToLocalPrecedenceEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1
Configuration information of map of the COS to local precedence.
Indexes
IF-MIBifIndex hpnicfOnuCosToLocalPrecedenceCosIndex
Column Syntax OID
hpnicfOnuCosToLocalPrecedenceCosIndex
Index of the map, obtains from packet cos value.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1
hpnicfOnuCosToLocalPrecedenceValue
Value of local precedence.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2

hpnicfEponOnuStpPortTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28 · 1 row entry · 3 columns
Open in standard view 
Table of ONU STP ports.
hpnicfEponOnuStpPortEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1
Configuration information of ONU STP ports.
Indexes
IF-MIBifIndex hpnicfEponStpPortIndex
Column Syntax OID
hpnicfEponStpPortIndex
The index of the STP ports.
Integer32
Constraints:
range: 0-144
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1
hpnicfEponStpPortDescr
The description of the STP ports.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2
hpnicfEponStpPortState
The current state of the port (i.e. disabled, discarding,
learning and forwarding).
Enumeration
Enumerated Values:
1disabled
2discarding
3learning
4forwarding
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3

hpnicfOnuPhysicalTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29 · 1 row entry · 5 columns
Open in standard view 
This table is used for getting ONU physical information.
hpnicfOnuPhysicalEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1
The entry of the hpnicfOnuPhysicalTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfOnuBridgeMac
The bridge MAC address of ONU.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1
hpnicfOnuFirstPonMac
The MAC address of ONU first PON port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2
hpnicfOnuFirstPonRegState
The register state of ONU first PON port.
Enumeration
Enumerated Values:
1notExist
2absent
3offline
4silent
5down
6up
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3
hpnicfOnuSecondPonMac
The MAC address of ONU second PON port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4
hpnicfOnuSecondPonRegState
The register state of ONU second PON port.
Enumeration
Enumerated Values:
1notExist
2absent
3offline
4silent
5down
6up
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5

hpnicfOnuSmlkTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30 · 1 row entry · 5 columns
Open in standard view 
This table is used for getting ONU SMLK information.
hpnicfOnuSmlkEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1
The entry of the hpnicfOnuSmlkTable.
Indexes
IF-MIBifIndex hpnicfOnuSmlkGroupID
Column Syntax OID
hpnicfOnuSmlkGroupID
The SMLK group ID of ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1
hpnicfOnuSmlkFirstPonRole
The role of ONU first PON port in a SMLK group.
Enumeration
Enumerated Values:
1master
2slave
3null
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2
hpnicfOnuSmlkFirstPonStatus
The transmitting status of ONU first PON port in a SMLK group.
Enumeration
Enumerated Values:
1active
2standby
3down
4null
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3
hpnicfOnuSmlkSecondPonRole
The role of ONU second PON port in a SMLK group.
Enumeration
Enumerated Values:
1master
2slave
3null
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4
hpnicfOnuSmlkSecondPonStatus
The transmitting status of ONU second PON port in a SMLK group.
Enumeration
Enumerated Values:
1active
2standby
3down
4null
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5

hpnicfOnuRS485PropertiesTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31 · 1 row entry · 11 columns
Open in standard view 
Property table.
hpnicfOnuRS485PropertiesEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1
The entry of property table.
Indexes
IF-MIBifIndex hpnicfOnuRS485SerialIndex
Column Syntax OID
hpnicfOnuRS485SerialIndex
The index of serial port.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1
hpnicfOnuRS485BaudRate
The port baud rate.
Enumerationr/w
Enumerated Values:
1baudRate300
2baudRate600
3baudRate1200
4baudRate2400
5baudRate4800
6baudRate9600
7baudRate19200
8baudRate38400
9baudRate57600
10baudRate115200
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2
hpnicfOnuRS485DataBits
The port number of data bits in a character.
bitEnumerationr/w
Enumerated Values:
1five
2six
3seven
4eight
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3
hpnicfOnuRS485Parity
The port sense of a character parity bit.
Enumerationr/w
Enumerated Values:
1none
2odd
3even
4mark
5space
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4
hpnicfOnuRS485StopBits
The port number of stop bits.
bitEnumerationr/w
Enumerated Values:
1one
2two
3oneAndHalf
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5
hpnicfOnuRS485FlowControl
The port type of input flow control.
'none' indicates no flow control at this level.
'hardware' indicates using hardware signals.
'xonOrxoff' indicates using software function.
Enumerationr/w
Enumerated Values:
1none
2hardware
3xonOrxoff
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6
hpnicfOnuRS485TXOctets
The number of output octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7
hpnicfOnuRS485RXOctets
The number of input octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8
hpnicfOnuRS485TXErrOctets
The number of output error octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9
hpnicfOnuRS485RXErrOctets
The number of input error octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10
hpnicfOnuRS485ResetStatistics
Reset the counters to zero, including hpnicfOnuRS485TXOctets,
hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and
hpnicfOnuRS485RXErrOctets.
Enumerationr/w
Enumerated Values:
1counting
2clear
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11

hpnicfOnuRS485SessionSummaryTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32 · 1 row entry · 2 columns
Open in standard view 
Session summary table.
hpnicfOnuRS485SessionSummaryEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1
The entry of session summary table.
Indexes
IF-MIBifIndex hpnicfOnuRS485SerialIndex
Column Syntax OID
hpnicfOnuRS485SessionMaxNum
The max session number of every serial port
which can be supported.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1
hpnicfOnuRS485SessionNextIndex
The next valid index used for creating a new session raw.
When there is no valid index left, it will return 0.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2

hpnicfOnuRS485SessionTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33 · 1 row entry · 7 columns
Open in standard view 
RS485 raw session table.  Data received from RS485 will be sent
to the destination by raw sockets.
hpnicfOnuRS485SessionEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1
The entry of session table.
Indexes
IF-MIBifIndex hpnicfOnuRS485SerialIndex hpnicfOnuRS485SessionIndex
Column Syntax OID
hpnicfOnuRS485SessionIndex
Raw session index.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1
hpnicfOnuRS485SessionType
The type of a session.
A session can use UDP socket, TCP socket as a client,
or TCP socket as a server.
Enumerationr/w
Enumerated Values:
1udp
2tcpClient
3tcpServer
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2
hpnicfOnuRS485SessionAddType
This object indicates the transport type of the
address contained in hpnicfOnuRS485SessionRemoteIP object.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3
hpnicfOnuRS485SessionRemoteIP
The IP of remote landing.
When session type is 'udp', this is the peer IP.
When session type is 'tcpClient', this is the server IP.
When session type is 'tcpServer', this is invalid.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4
hpnicfOnuRS485SessionRemotePort
The port of remote landing.
When session type is 'udp', this is the peer port.
When session type is 'tcpClient', this is the server port.
When session type is 'tcpServer', this is invalid.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5
hpnicfOnuRS485SessionLocalPort
Local socket port.
When session type is 'udp', this is local UDP socket port.
When session type is 'tcpClient', this is invalid.
When session type is 'tcpServer', this is the local port which
will be listened.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6
hpnicfOnuRS485SessionRowStatus
The status used for creating,
modifying, and deleting instances of
the columnar objects in raw session table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7

hpnicfOnuRS485SessionErrInfoTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34 · 1 row entry · 1 columns
Open in standard view 
Error information table.  When failed to create a session,
error information can be got from this table.
hpnicfOnuRS485SessionErrInfoEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1
The entry of error information table.
Indexes
IF-MIBifIndex hpnicfOnuRS485SerialIndex hpnicfOnuRS485SessionIndex
Column Syntax OID
hpnicfOnuRS485SessionErrInfo
Error information string. When a response with 'noCreeation' for
row creation in table hpnicfOnuRS485SessionTable,
the error reason can be got from this object.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1

hpnicfEponBatchOperationBySlotTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1 · 1 row entry · 4 columns
Open in standard view 
This table is used for batch operation by slot.
hpnicfEponBatchOperationBySlotEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1
The entry of the hpnicfEponBatchOperationBySlotTable.
Indexes
hpnicfEponBatchOperationBySlotIndex
Column Syntax OID
hpnicfEponBatchOperationBySlotIndex
The EPON board index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1
hpnicfEponBatchOperationBySlotType
The types of batch operation by slot:
1 - resetUnknown, the object value is not set.
9 - updateDba, update OLT DBA algorithm.
Config the MIB object module hpnicfEponDbaUpdateFileName.
10 - updateONU, update ONU firmwa…
Enumerationr/w
Enumerated Values:
1resetUnknown
9updateDba
10updateONU
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2
hpnicfEponBatchOperationBySlot
Execute batch operation.
Enumerationr/w
Enumerated Values:
1batOpBySlot
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3
hpnicfEponBatchOperationBySlotResult
The result of batch operation.
0xFFFF - other, general error.
1 - working, operation is not completed.
2 - successful, completed successfully.
3 - failed because the DBA source file does not exist.
4 - failed because th…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4

hpnicfEponBatchOperationByOLTTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2 · 1 row entry · 3 columns
Open in standard view 
This table is used for batch operation by OLT.
hpnicfEponBatchOperationByOLTEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1
The entry of the hpnicfEponBatchOperationByOLTTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfEponBatchOperationByOLTType
The types of batch operation by OLT(operation for all ONUs in the
OLT):
1 -- resetUnknown, the object value is not set.
5 -- updateONU, update ONU firmware.
configure the MIB object module hpnicfEponOnuUpdateFileName
wi…
Enumerationr/w
Enumerated Values:
1resetUnknown
5updateONU
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.1
hpnicfEponBatchOperationByOLT
Execute batch operation.
Enumerationr/w
Enumerated Values:
1batOpByOlt
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.2
hpnicfEponBatchOperationByOLTResult
The result of batch operation:
0xFFFF -- other, gernal error.
1 -- working, operation is not completed.
2 -- successful, operation completed successfully.
4 -- failed because the ONU firmware file does not exist.
6 -- f…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.3

hpnicfOnuFirmwareUpdateByTypeTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3 · 1 row entry · 4 columns
Open in standard view 
This table is used to update ONU by ONU type.
hpnicfOnuFirmwareUpdateByTypeEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1
The entry of the hpnicfOnuFirmwareUpdateByTypeTable.
Indexes
hpnicfOnuUpdateByOnuTypeIndex
Column Syntax OID
hpnicfOnuUpdateByOnuTypeIndex
The type and file relationship table entry index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.1
hpnicfOnuUpdateByTypeOnuType
The type of ONUs.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.2
hpnicfOnuUpdateByTypeFileName
The file to be updated for the type of ONUs.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.3
hpnicfOnuUpdateByTypeRowStatus
The status of this table entry.
Only createAndGo and destroy actions are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.4

hpnicfEponStatTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1 · 1 row entry · 2 columns
Open in standard view 
This table contains line code error statistics of epon port.
hpnicfEponStatEntry entry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1
The entry of hpnicfEponStatTable.
Indexes
IF-MIBifIndex
Column Syntax OID
hpnicfEponStatFER
The frame error rate of epon port, measured in 1e-9 unit.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.1
hpnicfEponStatBER
The bit error rate of epon port, measured in 1e-9 unit.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.2