hpnicfEponAutoUpdateTable
HPN-ICF-EPON-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17
Object
table
EPON auto update ONU application configuration.
Context
- MIB
- HPN-ICF-EPON-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17- Type
- table
- Status
- current
- Parent
- hpnicfEponSysMan
- Siblings
- 19
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfEponAutoAuthorize This value determines whether software performs
self-authorization for each Optical Network Unit(ONU)
registering to the network. Setting it to false
means for every ONU register… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1 |
| hpnicfEponMonitorCycleMaxVal The upper limit of cycle which be confined to the
hpnicfEponMonitorCycle. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10 |
| hpnicfEponMsgTimeOutMinVal The lower limit of timeout which be confined to the
hpnicfEponMsgTimeOut. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11 |
| hpnicfEponMsgTimeOutMaxVal The upper limit of timeout which be confined to the
hpnicfEponMsgTimeOut. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12 |
| hpnicfEponMsgLoseNumMinVal The lower limit of time which be confined to the
hpnicfEponMsgLoseNum. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13 |
| hpnicfEponMsgLoseNumMaxVal The upper limit of time which be confined to the
hpnicfEponMsgLoseNum. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14 |
| hpnicfEponSysScalarGroup | node | - | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15 |
| hpnicfEponSysManTable This table defines system related parameters. | table | - | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16 |
| hpnicfEponOuiIndexNextTable Next OUI index table. | table | - | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18 |
| hpnicfEponOuiTable List of OUI and OAM supported by OLT. | table | - | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19 |
| hpnicfEponMonitorCycle The cycle of alarm thresholds checking.
Applying to the following types:
Bit Error Rate(BER) alarm, Frame Error Rate(FER),
Logical Link Identity(LLID) mismatch alarm and so on.
Th… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2 |
| hpnicfEponMulticastControlTable Multicast control global configuration. | table | - | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20 |
| hpnicfEponMsgTimeOut Timeout waiting for a response from Optical Line Terminal(OLT)
firmware after sending it a message.
The unit is millisecond. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3 |
| hpnicfEponMsgLoseNum The times of messages sending timeouts, after
which OLT will reset (applying to every OLT). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4 |
| hpnicfEponSysHasEPONBoard true(1) - At least an EPON board exists.
false(2) - No EPON board exists. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5 |
| hpnicfEponMonitorCycleEnable Stop or continue monitoring.
true(1) - Continue monitoring.
false(2) - Stop monitoring. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6 |
| hpnicfEponOltSoftwareErrAlmEnable Software error alarm behavior of all active OLTs.
true(1) - alarm enable.
false(2) - alarm disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7 |
| hpnicfEponPortLoopBackAlmEnable LoopBack alarm behavior of EPON ports.
true(1) - alarm enable.
false(2) - alarm disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8 |
| hpnicfEponMonitorCycleMinVal The lower limit of cycle which be confined to the
hpnicfEponMonitorCycle. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfEponAutoUpdateEntry The entry of the table hpnicfEponAutoUpdateTable. | row | - | .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1 |