snSwProbePortNum
HP-SN-SWITCH-GROUP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.12
Object
scalar
r/w
Integer32
A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. A stackable switch is only assigned with one probe port as a traffic analyzer.
Context
- MIB
- HP-SN-SWITCH-GROUP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- snSwInfo
- Siblings
- 40
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snSwGroupOperMode noVLan(1) represents all switch ports with no virtual
LAN by port (no Port VLAN), and with no tag assigned.
vlanByPort(2) represents all switch ports with Basic
VLAN (layer2 Swi… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.1 |
| snFdbTableStationFlush The following values of the flush state
can only be read:
normal(1)... normal state
error(2)... operation failed
flushing(4)... in process
The following value can be… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.10 |
| snPortStpSetAll The value of this object is 1 which means invoking
Port STP Set-all command. The snPortStpPriority,
snPortStpPathCost, the read-write STP related
attributes of the first row of… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.11 |
| snSw8021qTagMode The Switch Group is configured with the IEEE802.1q
Tagging mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate IEEE802.1q Tagging mode.… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.13 |
| snSwGlobalStpMode Spanning Tree System Global Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.14 |
| snSwIpMcastQuerierMode The IP Multicast pruning mode is configured either
Non-Querier or Querier mode and the default is
querier mode.
querier(1)...........when prunning traffic locally
… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.15 |
| snSwViolatorPortNumber The port number of the switch or router that received
a violator packet. It is included in the locked
address violation trap.
The bit 0 to bit 7: port number.
The bit 8 to bit 11… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.17 |
| snSwViolatorMacAddress The source address of the violator packet received
by the switch or router. It is included in the locked
address violation trap. | scalar | MacAddress | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.18 |
| snVLanGroupVlanMaxEntry The maximum number of VLAN entries are allowed to configure. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.19 |
| snSwGroupIpL3SwMode The Switch Group is configured with the Layer3
IP Switch mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate Layer3 IP Switch
disabled(… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.2 |
| snSwEosBufferSize A specific buffer size for all the different EOS buffers. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.20 |
| snVLanByPortEntrySize The size of each VLAN table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.21 |
| snSwPortEntrySize The size of each port table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.22 |
| snFdbStationEntrySize The size of each Fdb station table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.23 |
| snPortStpEntrySize The size of each port stp table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.24 |
| snSwEnableBridgeNewRootTrap Indicates whether the SNMP agent process is
permitted to generate bridge new root traps. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.25 |
| snSwEnableBridgeTopoChangeTrap Indicates whether the SNMP agent process is
permitted to generate bridge topology change
traps. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.26 |
| snSwEnableLockedAddrViolationTrap Indicates whether the SNMP agent process is
permitted to generate locked address violation
traps. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.27 |
| snSwIpxL3SwMode The Switch Group is configured with the Layer3
IPX Switch mode either enabled or disabled and
the default is disabled mode.
enabled(1)...........activate Layer3 Switch
disabled(0… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.28 |
| snVLanByIpSubnetMaxSubnets The maximum number of subnets for each IP VLAN. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.29 |
| snSwGroupIpMcastMode The Switch Group is configured with the IP Multicast
pruning mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate IP Multicast pruning
d… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.3 |
| snVLanByIpxNetMaxNetworks The maximum number of networks for each IPX VLAN. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.30 |
| snSwProtocolVLanMode disabled(0) - represents system with Protocol VLAN disabled.
enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.31 |
| snMacStationVLanId This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table.
(dot1dTpFdbTable). Since the dot1dTpFdbTable index is the MAC Address assigned to… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.32 |
| snSwClearCounters valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clear counter command of the following counters:
Dot3, MIB2, IP and IPX counters… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.33 |
| snSw8021qTagType The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.34 |
| snSwBroadcastLimit Limit the number of broadcast packets to forward out of the
switch ports. This object specifies the number of broadcast
packets per second. Setting a value of 0 to this object
dis… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.35 |
| snSwMaxMacFilterPerSystem The maximum number of MAC Filters per system in the MAC Filter table. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.36 |
| snSwMaxMacFilterPerPort The maximum number of MAC Filters per port in the Port MAC Access Filter table. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.37 |
| snSwDefaultVLanId The VLAN ID of the DEFAULT PORT-VLAN. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.38 |
| snSwGlobalAutoNegotiate This feature only applies to Gigabit Ethernet ports. If set
to disable(0), all Gigabit Ethernet ports will be put to non-
negotiation mode. If set to enable(1), all Gigabit Ethern… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.39 |
| snSwGroupDefaultCfgMode The Switch Group is configured with the Default
configuration. If the default configuration gets
overwritten, the state will change to non-default.
default(1)...........default co… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.4 |
| snSwQosMechanism Indicates whether the qos mechanism is
strict or weighted. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.40 |
| snSwSingleStpMode Single Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
disabled mode.
enabled(1)...........activate Single Spanning Tree
d… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.41 |
| snSwFastStpMode Fast Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Fast Spanning Tree
disabl… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.42 |
| snSwGroupSwitchAgeTime The Switch Age time is 180sec by default.
The configured range is 10 to 10,000sec. The time
represents the time span to age out an MAC Address
entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.5 |
| snVLanGroupVlanCurEntry The current total entry number of VLANs are configured. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.6 |
| snVLanGroupSetAllVLan The value of this object is the VLanIndex of a particalur
entry in snVLanByPortTable (snVLanByPortVLanIndex).
All the attributes of that row of table except PortMask
will be use… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.7 |
| snSwPortSetAll The value of this object is the index number of the
snSwPortInfoTable (snSwPortInfoPortIndex).
snSwPortInfoMonitorMode, snSwPortInfoTagMode,
snSwPortInfoChnMode, snSwPortInfoSp… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.8 |
| snFdbTableCurEntry The current total entry number of FDB are configured. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.9 |