snPortStpSetAll
HP-SN-SWITCH-GROUP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.11
Object
scalar
r/w
Integer32
The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of the first row of table will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one.
Context
- MIB
- HP-SN-SWITCH-GROUP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- snSwInfo
- Siblings
- 40
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snSwGroupOperMode noVLan(1) represents all switch ports with no virtual
LAN by port (no Port VLAN), and with no tag assigned.
vlanByPort(2) represents all switch ports with Basic
VLAN (layer2 Swi… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.1 |
| snFdbTableStationFlush The following values of the flush state
can only be read:
normal(1)... normal state
error(2)... operation failed
flushing(4)... in process
The following value can be… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.10 |
| snSwProbePortNum A chassis switch probe port is operated as a traffic analyzer
port and only one port can be assigned in the chassis.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot nu… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.12 |
| snSw8021qTagMode The Switch Group is configured with the IEEE802.1q
Tagging mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate IEEE802.1q Tagging mode.… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.13 |
| snSwGlobalStpMode Spanning Tree System Global Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.14 |
| snSwIpMcastQuerierMode The IP Multicast pruning mode is configured either
Non-Querier or Querier mode and the default is
querier mode.
querier(1)...........when prunning traffic locally
… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.15 |
| snSwViolatorPortNumber The port number of the switch or router that received
a violator packet. It is included in the locked
address violation trap.
The bit 0 to bit 7: port number.
The bit 8 to bit 11… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.17 |
| snSwViolatorMacAddress The source address of the violator packet received
by the switch or router. It is included in the locked
address violation trap. | scalar | MacAddress | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.18 |
| snVLanGroupVlanMaxEntry The maximum number of VLAN entries are allowed to configure. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.19 |
| snSwGroupIpL3SwMode The Switch Group is configured with the Layer3
IP Switch mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate Layer3 IP Switch
disabled(… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.2 |
| snSwEosBufferSize A specific buffer size for all the different EOS buffers. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.20 |
| snVLanByPortEntrySize The size of each VLAN table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.21 |
| snSwPortEntrySize The size of each port table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.22 |
| snFdbStationEntrySize The size of each Fdb station table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.23 |
| snPortStpEntrySize The size of each port stp table entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.24 |
| snSwEnableBridgeNewRootTrap Indicates whether the SNMP agent process is
permitted to generate bridge new root traps. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.25 |
| snSwEnableBridgeTopoChangeTrap Indicates whether the SNMP agent process is
permitted to generate bridge topology change
traps. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.26 |
| snSwEnableLockedAddrViolationTrap Indicates whether the SNMP agent process is
permitted to generate locked address violation
traps. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.27 |
| snSwIpxL3SwMode The Switch Group is configured with the Layer3
IPX Switch mode either enabled or disabled and
the default is disabled mode.
enabled(1)...........activate Layer3 Switch
disabled(0… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.28 |
| snVLanByIpSubnetMaxSubnets The maximum number of subnets for each IP VLAN. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.29 |
| snSwGroupIpMcastMode The Switch Group is configured with the IP Multicast
pruning mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate IP Multicast pruning
d… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.3 |
| snVLanByIpxNetMaxNetworks The maximum number of networks for each IPX VLAN. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.30 |
| snSwProtocolVLanMode disabled(0) - represents system with Protocol VLAN disabled.
enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.31 |
| snMacStationVLanId This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table.
(dot1dTpFdbTable). Since the dot1dTpFdbTable index is the MAC Address assigned to… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.32 |
| snSwClearCounters valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clear counter command of the following counters:
Dot3, MIB2, IP and IPX counters… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.33 |
| snSw8021qTagType The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.34 |
| snSwBroadcastLimit Limit the number of broadcast packets to forward out of the
switch ports. This object specifies the number of broadcast
packets per second. Setting a value of 0 to this object
dis… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.35 |
| snSwMaxMacFilterPerSystem The maximum number of MAC Filters per system in the MAC Filter table. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.36 |
| snSwMaxMacFilterPerPort The maximum number of MAC Filters per port in the Port MAC Access Filter table. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.37 |
| snSwDefaultVLanId The VLAN ID of the DEFAULT PORT-VLAN. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.38 |
| snSwGlobalAutoNegotiate This feature only applies to Gigabit Ethernet ports. If set
to disable(0), all Gigabit Ethernet ports will be put to non-
negotiation mode. If set to enable(1), all Gigabit Ethern… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.39 |
| snSwGroupDefaultCfgMode The Switch Group is configured with the Default
configuration. If the default configuration gets
overwritten, the state will change to non-default.
default(1)...........default co… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.4 |
| snSwQosMechanism Indicates whether the qos mechanism is
strict or weighted. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.40 |
| snSwSingleStpMode Single Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
disabled mode.
enabled(1)...........activate Single Spanning Tree
d… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.41 |
| snSwFastStpMode Fast Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Fast Spanning Tree
disabl… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.42 |
| snSwGroupSwitchAgeTime The Switch Age time is 180sec by default.
The configured range is 10 to 10,000sec. The time
represents the time span to age out an MAC Address
entry. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.5 |
| snVLanGroupVlanCurEntry The current total entry number of VLANs are configured. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.6 |
| snVLanGroupSetAllVLan The value of this object is the VLanIndex of a particalur
entry in snVLanByPortTable (snVLanByPortVLanIndex).
All the attributes of that row of table except PortMask
will be use… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.7 |
| snSwPortSetAll The value of this object is the index number of the
snSwPortInfoTable (snSwPortInfoPortIndex).
snSwPortInfoMonitorMode, snSwPortInfoTagMode,
snSwPortInfoChnMode, snSwPortInfoSp… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.8 |
| snFdbTableCurEntry The current total entry number of FDB are configured. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.9 |