hpicfPim6StateRefreshInterval
HP-ICF-PIM6 ·
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.2
Object
scalar
r/w
seconds Integer32
The interval between successive State Refresh messages originated by this router. Default is 60 seconds. The maximum value allowed in PIMv6 for State Refresh interval will be 100.
Context
- MIB
- HP-ICF-PIM6
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- hpicfPim6
- Siblings
- 20
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 10-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPim6AdminStatus The operational status of the PIMv6 routing protocol
on this router. Default is disabled. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.1 |
| hpicfPim6TotalNeighborCount PIMv6 Neighbor Count. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.10 |
| hpicfPim6JoinPruneInterval The default interval at which periodic PIMv6-SM Join/Prune
messages are to be sent. | scalar | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.11 |
| hpicfPim6StaticRPSetTable The (conceptual) table containing statically
configured Rendezvous Points (RPs) for IPv6 multicast
group mappings. This information is being used
in the PIMv6 Sparse mode only. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.12 |
| hpicfPim6CandidateRPTable The (conceptual) table listing the IPv6 multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of hpicfPim6ComponentCRPHoldTime is
non… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.13 |
| hpicfPim6ComponentTable The (conceptual) table containing objects specific to a PIMv6
domain. One row exists for each domain to which the router
is connected. A PIMv6-SM domain is defined as an area of… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14 |
| hpicfPim6SPTThreshold Specifies a threshold for switching to the Shortest
Path Tree (SPT) on this router. If the object has
the special value of -1, the Shared Tree rooted to the
Rendezvous Point (RP) … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.15 |
| hpicfPim6NeighborTable The (conceptual) table listing the router's PIMv6 neighbors. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.16 |
| hpicfPim6RPSetTable The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from r… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.17 |
| hpicfPim6IpMcastEnabled The enabled status of IPv6 Multicast routing on this router. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.18 |
| hpicfPim6IpMcastRouteEntryCount The number of rows in the ipMRouteTable. This can be used
to monitor the multicast routing table size. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.19 |
| hpicfPim6IpMRouteTable The (conceptual) table containing multicast routing
information for IPv6 datagrams sent by particular sources to
the IPv6 multicast groups known to this router. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.20 |
| hpicfPim6IpMRouteNHopTable The (conceptual) table containing information on the
next-hops on outgoing interfaces for routing IP multicast
datagrams. Each entry is one of a list of next-hops on
outgoing int… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21 |
| hpicfPim6TrapControl Indicates whether the PIMv6-enabled router will generate
SNMP traps for PIMv6 events. The set bit means 'enabled'.
- neighborLoss(0)
This bit controls whether the not… | scalar | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.3 |
| hpicfPim6IfTable HP extensions to the pimInterfaceTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4 |
| hpicfPim6RemoveConfig PIMv6 is halted. This objects clears all existing PIMv6
configuration, intializes the pim config to the default
state. SnmpGet on this will always return false.
An SnmpSet of fa… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.5 |
| hpicfPim6NumStaticRpfEntries Total number of Static RPF entries. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.6 |
| hpicfPim6Version Currently running PIM Version. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.7 |
| hpicfPim6StarGEntries Total number of entries in the (*,G) table | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.8 |
| hpicfPim6SGEntries Total number of entries in the (S,G) table. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.9 |