hpicfPim6IpMcastEnabled
HP-ICF-PIM6 ·
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.18
Object
scalar
r/w
Enumeration
The enabled status of IPv6 Multicast routing on this router.
Context
- MIB
- HP-ICF-PIM6
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hpicfPim6
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPim6AdminStatus The operational status of the PIMv6 routing protocol
on this router. Default is disabled. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.1 |
| hpicfPim6TotalNeighborCount PIMv6 Neighbor Count. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.10 |
| hpicfPim6JoinPruneInterval The default interval at which periodic PIMv6-SM Join/Prune
messages are to be sent. | scalar | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.11 |
| hpicfPim6StaticRPSetTable The (conceptual) table containing statically
configured Rendezvous Points (RPs) for IPv6 multicast
group mappings. This information is being used
in the PIMv6 Sparse mode only. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.12 |
| hpicfPim6CandidateRPTable The (conceptual) table listing the IPv6 multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of hpicfPim6ComponentCRPHoldTime is
non… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.13 |
| hpicfPim6ComponentTable The (conceptual) table containing objects specific to a PIMv6
domain. One row exists for each domain to which the router
is connected. A PIMv6-SM domain is defined as an area of… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14 |
| hpicfPim6SPTThreshold Specifies a threshold for switching to the Shortest
Path Tree (SPT) on this router. If the object has
the special value of -1, the Shared Tree rooted to the
Rendezvous Point (RP) … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.15 |
| hpicfPim6NeighborTable The (conceptual) table listing the router's PIMv6 neighbors. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.16 |
| hpicfPim6RPSetTable The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from r… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.17 |
| hpicfPim6IpMcastRouteEntryCount The number of rows in the ipMRouteTable. This can be used
to monitor the multicast routing table size. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.19 |
| hpicfPim6StateRefreshInterval The interval between successive State Refresh
messages originated by this router.
Default is 60 seconds. The maximum value allowed
in PIMv6 for State Refresh interval will be 100. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.2 |
| hpicfPim6IpMRouteTable The (conceptual) table containing multicast routing
information for IPv6 datagrams sent by particular sources to
the IPv6 multicast groups known to this router. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.20 |
| hpicfPim6IpMRouteNHopTable The (conceptual) table containing information on the
next-hops on outgoing interfaces for routing IP multicast
datagrams. Each entry is one of a list of next-hops on
outgoing int… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21 |
| hpicfPim6TrapControl Indicates whether the PIMv6-enabled router will generate
SNMP traps for PIMv6 events. The set bit means 'enabled'.
- neighborLoss(0)
This bit controls whether the not… | scalar | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.3 |
| hpicfPim6IfTable HP extensions to the pimInterfaceTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4 |
| hpicfPim6RemoveConfig PIMv6 is halted. This objects clears all existing PIMv6
configuration, intializes the pim config to the default
state. SnmpGet on this will always return false.
An SnmpSet of fa… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.5 |
| hpicfPim6NumStaticRpfEntries Total number of Static RPF entries. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.6 |
| hpicfPim6Version Currently running PIM Version. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.7 |
| hpicfPim6StarGEntries Total number of entries in the (*,G) table | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.8 |
| hpicfPim6SGEntries Total number of entries in the (S,G) table. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.9 |