hpicfPim6ComponentTable

HP-ICF-PIM6 · .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14

Object

table

The (conceptual) table containing objects specific to a PIMv6
domain.  One row exists for each domain to which the router
is connected.  A PIMv6-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIMv6-SM router will be a member of exactly one
domain.  This table also supports, however, routers which
may form a border between two PIMv6-SM domains and do not
forward Bootstrap messages between them.

Context

MIB: HP-ICF-PIM6
OID: .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.14
Type: table
Status: current
Parent: hpicfPim6
Siblings: 20
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hpicfPim6AdminStatus The operational status of the PIMv6 routing protocol on this router. Default is disabled.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.1`
hpicfPim6TotalNeighborCount PIMv6 Neighbor Count.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.10`
hpicfPim6JoinPruneInterval The default interval at which periodic PIMv6-SM Join/Prune messages are to be sent.	scalar	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.11`
hpicfPim6StaticRPSetTable The (conceptual) table containing statically configured Rendezvous Points (RPs) for IPv6 multicast group mappings. This information is being used in the PIMv6 Sparse mode only.	table	-	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.12`
hpicfPim6CandidateRPTable The (conceptual) table listing the IPv6 multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of hpicfPim6ComponentCRPHoldTime is non…	table	-	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.13`
hpicfPim6SPTThreshold Specifies a threshold for switching to the Shortest Path Tree (SPT) on this router. If the object has the special value of -1, the Shared Tree rooted to the Rendezvous Point (RP) …	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.15`
hpicfPim6NeighborTable The (conceptual) table listing the router's PIMv6 neighbors.	table	-	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.16`
hpicfPim6RPSetTable The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from r…	table	-	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.17`
hpicfPim6IpMcastEnabled The enabled status of IPv6 Multicast routing on this router.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.18`
hpicfPim6IpMcastRouteEntryCount The number of rows in the ipMRouteTable. This can be used to monitor the multicast routing table size.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.19`
hpicfPim6StateRefreshInterval The interval between successive State Refresh messages originated by this router. Default is 60 seconds. The maximum value allowed in PIMv6 for State Refresh interval will be 100.	scalar	seconds Integer32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.2`
hpicfPim6IpMRouteTable The (conceptual) table containing multicast routing information for IPv6 datagrams sent by particular sources to the IPv6 multicast groups known to this router.	table	-	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.20`
hpicfPim6IpMRouteNHopTable The (conceptual) table containing information on the next-hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next-hops on outgoing int…	table	-	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21`
hpicfPim6TrapControl Indicates whether the PIMv6-enabled router will generate SNMP traps for PIMv6 events. The set bit means 'enabled'. - neighborLoss(0) This bit controls whether the not…	scalar	Bits	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.3`
hpicfPim6IfTable HP extensions to the pimInterfaceTable.	table	-	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4`
hpicfPim6RemoveConfig PIMv6 is halted. This objects clears all existing PIMv6 configuration, intializes the pim config to the default state. SnmpGet on this will always return false. An SnmpSet of fa…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.5`
hpicfPim6NumStaticRpfEntries Total number of Static RPF entries.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.6`
hpicfPim6Version Currently running PIM Version.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.7`
hpicfPim6StarGEntries Total number of entries in the (*,G) table	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.8`
hpicfPim6SGEntries Total number of entries in the (S,G) table.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.9`

Child Objects